• Nuclear Engineering and Technology
• /
• v.56 no.3
• /
• pp.1091-1099
• /
• 2024

Fluoride-salt-cooled High-temperature Reactor (FHR) is a promising nuclear reactor technology. Among many challenges presented by the molten fluoride salts is the corrosion of salt-facing structural components. Higher moisture contents, in the FLiNaK (LiF-NaF-KF, 46.5-11.5-42 mol%) salt, aggravate intergranular corrosion and pitting for the given alloys. Therefore, several thermal dehydration tests of FLiNaK salt were performed with a batch size suitable for thermal-hydraulic experiments. Thermogravimetric Analysis (TGA) was performed for the three constituent fluoride salts individually. Preliminary thermal dehydration plans were then proposed for NaF and KF salts based on the TGA curves. However, the dehydration process may not be required for LiF since its low mass loss (<1.3 wt%). To evaluate the performance of these thermal dehydration plans, a batch-scale salt dehydration test facility was designed and constructed. The preliminary thermal dehydration plans were tested by varying the heating rates, target temperature, and holding time. The sample mass loss data showed that the high temperatures (>500 ℃) were necessary to remove a significant amount of moisture (>1 wt%) from NaF salt, while relatively low temperatures (around 300 ℃) with a long holding time (>10 h) were sufficient to remove most of the moisture from KF salt.

• Journal of the Korean Ceramic Society
• /
• v.24 no.4
• /
• pp.307-312
• /
• 1987

The investigation has been performed to study thermal dehydration of Song-sug, Pyung-il-do and Chung-mu diapore in Korea. Thermal analysis of Korean diaspore showed two steps of dehydration by dispore and kaolinite. The activation energy of dehydration reation of each diaspore was calculated by kissinger's method, and the results obtained were 63.608, 37.867 and 54.885Kcal/mol, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.3
• /
• pp.341-344
• /
• 1999

The hydrazones of 2-acetylfuran, 2-acetylthiophene, and 2-acetylpyrrole, were allowed to react with S-methylthioacetimidate hydroiodide (8) to give azinoureas 10, and the reaction of 10 with Appel's dehydration conditions (triphenylphosphine/carbon tetrachloride/triethylamine) led to the corresponding azinocarbodiimides 11, which underwent thermal rearrangement under the reaction conditions to give 1,1-diheteroaryl ethylenes 13.

• Journal of the Korean Society of Combustion
• /
• v.10 no.4
• /
• pp.24-32
• /
• 2005

Various types of plasma source applied in $CH_4$ decomposition process are compared. DBD by pulse and AC power, spark by pulse and AC power, rotating arc and hollow cathode plasma are chosen to be compared. The results show that $CH_4$ conversion per given unit power is relatively high in hollow cathode plasma and rotating arc that induces rather high temperature condition and that is why both thermal dehydration and plasma induced decomposition contribute for the overall process. In case of DBD wherein high temperature electron and low temperature gas molecule coexist, the process shows low conversion rate, for in rather low temperature condition the contribution of thermal dehydration is lowered. Selectivity of $C_2H_6$ and $C_2H_2$ is shown to be a good parameter of the relative contribution of plasma chemistry in the overall process. From the results we concluded that required condition of plasma source for a cost effective and high yield $CH_4$ decomposition is to have characteristics of both thermal plasma and non thermal plasma in which temperature is high above a certain threshold state for thermal dehydration and electron induced collision is maximized in the same breath.

• Applied Chemistry for Engineering
• /
• v.10 no.6
• /
• pp.885-888
• /
• 1999

This study was carried out to determine the reaction kinetic constant of the dehydration - thermal decomposition of $Na_2B_4O_7{\cdot}10H_2O/Na_2B_4O_7{\cdot}5H_2O$ and to investigate the durability during the repeated use of a chemical heat-storage material and the reproducibility of reaction system. The order of the dehydration reaction was 1st-order. The reaction rate was directly proportional to a partial pressure difference of water steam. The kinetic constant was 0.27 and the reproducibility of dehydration reaction for a kinetic constant and a reaction order was excellent. The activity variation in the durability test of a chemical heat-storage material was within range of ${\pm}5%$ during the repeatedly use in several times.

• Journal of the Korean Ceramic Society
• /
• v.18 no.1
• /
• pp.35-40
• /
• 1981

The kinetics of the dehydration of Ha-dong kaolin was studied isothermally at various temperatures. Dehydration rate was measured by thermogravimetry method in the temperature range of 440~50$0^{\circ}C$ and the particle size range of 170~325mesh. The general equation f($\alpha$)=kt, where $\alpha$ is the fraction reacted in the time and the function f($\alpha$) depends on the reaction mechanism, was applied to this reaction. The function, f($\alpha$) was obtained by application of reduced-time plot and plot of lnln (1-$\alpha$) vs. ln (time), and expressed as (1-$\alpha$) ln (1-$\alpha$)+$\alpha$=kt. The dehydration followed the diffusion-controlled reaction model and gave activation energy of 30Kcal/mole.

• Journal of the Korean Ceramic Society
• /
• v.24 no.5
• /
• pp.417-422
• /
• 1987

Kinetic studies were made on the thermal decomposition of hydrated magnesium aluminum double sulfate by a nonisothermal TG method. Thermal analyses of the dehydration of tricosahydrate showed that the reaction proceeded via decahydrate to the anhydrous MgAl2(SO4)4 in the range 50$^{\circ}$to 400$^{\circ}C$. Decomposition of MgAl2(SO4)4 occurred as the two-step between 650$^{\circ}$ and 970$^{\circ}C$. Dehydration of MgAl2(SO4)4$.$23H2O and a 2D diffusion controlled with an activation energy of 16.6kcal/mole, respectively. MgAl2(SO4)4 fitted the contracting volume model with an activation energy of 10.5kcal/mole, and MgSO4 fitted a contracting area model with an activation of 4.5kcal/mole.

• Journal of Biomedical Engineering Research
• /
• v.9 no.1
• /
• pp.47-60
• /
• 1988

N-n-Propylacrylamide has been synthesized from acrylamide and n-propyl bromide. N -n Propylacrylamide was copolymerized with acrylamide at $60^{\circ}C$ in tetrahydrofuran using ${\alpha},{\alpha}'$-azobisisbutyronitrile as initiator. The synthesized monomer and copolymers have been identified by NMR and FT-lR spectrophotometer. The swelling properties of the crosslinked homopolymers were investigated at different temperatures. Three types of hydration layer around the back-bone structure of gels were determined. The thermal properties of copolymers were also measured by differential scanning calorimeter and thermogravimetry. As the amounts of N-n-propylacrylamide are increased, the enthalpic changes associated with endothermic transition and glass transition of the copolymers are decreased. As the amount of N-n-propylacrylamide is increased, the thermal stability is increased. The activation energies of thermal decomposition and dehydration for the poly (acrylamide-co-N -n-propylacrylamide) have been evaluated by Freeman and Carroll's method. As the amounts of N-n- propylacrylamide are increased, the activation energies of thermal decomposition and dehydration are increased.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.1
• /
• pp.34-41
• /
• 2004

The chemical heat pump based on the Dehydration/Hydration process with a MgO/$H_2O$ system has been researched. The reactor bed could be expected to store the heat around 200∼37$0^{\circ}C$ by the dehydration reaction and to release the heat around 100∼16$0^{\circ}C$ by the hydration reaction under the heat amplification mode operation. The heat output rate of the heat pump system was evaluated using the experimentally determined parameters. The results show that 6∼50 W/kg of heat output and 0.5∼0.8 of heat recovery ratio are attainable. The heat pump will be applicable for a load leveling in a co-generation system by chemical storage of surplus heat at low heat demand and by supplying heat in the peak load period.

• Journal of the Korean Ceramic Society
• /
• v.35 no.8
• /
• pp.843-849
• /
• 1998

Fine powders of Mn-Zn ferrite were prepared by the alcoholic dehydration method and densification beha-vior of synthesized powder was investigated. The concentration and pH of solution for optimal precipitation was 0.4M and 2.5 respectively. The spinel single phase metastable state was formed by thermal decom-position of precipitate and then spinel phase was disintegrated into hematite and spinel {{{{ { { ZnFe}_{2 }O }_{4 } }} at 600$^{\circ}C$ With increase of temperature reaction of solid solution between hematite and spinel was proceeded and resulted in the spinel single phase (Mn, Zn Fe){{{{ { {Fe }_{2 }O }_{4 } }} On account of high reactivity of uncalcined powders densification started at 200$^{\circ}C$ lower and completed at 50$^{\circ}C$ lower in comparison with calcined powders.