• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.581-588
• /
• 2006

Now, a long span and special types of steel deck bridges like as suspention or cable state bridges are increasing and Guss Asphalt used in pavement. But Guss Asphalt may caused severe stress and displacement of the bridge as it is treated using very high temperature ranging from $220^{\circ}C\;to\;260^{\circ}C$. In this paper, a series of numerical tests of a steel deck box arch bridge were conducted to estimate the thermal effect of a steel deck bridge according to temperature changes.

• Steel and Composite Structures
• /
• 제45권2호
• /
• pp.263-279
• /
• 2022

With the span and arch rib size of concrete-filled steel tube (CFST) arch bridges increase, the hydration heat of pumped mass concrete inside large-size steel tube causes a significant temperature variation, leading to a risk of thermal stress-induced cracking during construction. In order to tackle this phenomenon, a hydration heat conduction model based on hydration degree was established through a nonlinear temperature analysis incorporating an exothermic hydration process to obtain the temperature field of large-size CFST. Subsequently, based on the evolution of elastic modulus based on hydration degree and early-age creep rectification, the finite element model (FEM) model and analytical study were respectively adopted to investigate the variation of the thermal stress of CFST during hydration heat release, and reasonable agreement between the results of two methods is found. Finally, a comparative study of the thermal stress with and without considering early-age creep was conducted.

• 전자공학회논문지A
• /
• 제33A권12호
• /
• pp.53-58
• /
• 1996

In this paper, a simple fabrication technique of an air-bridge for interconnection of isolated electrodes of microwave active and passive devices and MMIC's is proposed. The proposed air-bridge proceses are mainly combinations of thermal evaporation, positive photoresist and image reversal processes for easy lift-off of up to 2.0 .mu.m thick metal. According to the resutls of air-birdge processes, it is confirmed that air-gap and thickness of theair-bridge are about 3.5.mu.m, and 2.0.mu.m, respectively. And it is also possible to make the fine air-bridge with widths of 5~60.mu.m and post-intervals of 25~200.mu.m withot collapse. finally, GaAs power MESFET's and rectangular spiral inductors are fabricatd and measured in order to confirm of feasibility of the proposed air-bridge processes. The MAG of the fabricated power MESFET's is 10dB at 10GHz, and the inductance of the (200.mu. * 6 turns) rectangular spiral inductors 4.5 nH inX-band.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1997년도 가을 학술발표회 논문집
• /
• pp.95-102
• /
• 1997

Jointless bridge is a new construction method applicable to bridge of short length. In the jointless bridge expansion of superstructure due to thermal effect was absorbed in the flexible pile-type abutment in stead of expansion joint in the conventional bridges. By removing expansion joint, it retards deterioration and extends life time of bridge. In this paper, jointless bridge of steel box girder type was studied through finite element analysis. Stress variations of superstructure and pile due to thermal effect was studied for the two span continuous integral bridge of 80m length and the results of analysis was presented.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.363-368
• /
• 2001

Abutments in Kumdang bridge are massive concrete structures of which total height is l0m, length is 30m, and width is 7m. Therefore, there is every probability that early age thermal cracking such as hydration heat occur. We measure heat of hydration, strains of rebar, and stresses of concrete abutment during construction. Using analysis of measuring data, we examine thermal stresses, and make use of results as method which control thermal cracking. Finally, we develope thermal stress analysis program which have pre/post processor to be easy of accessing and the usefulness of that is estimated through comparison of results.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 춘계 학술논문 발표대회
• /
• pp.226-227
• /
• 2015

This research is to measure and analyze the thermal performance of the apartment structure and to evaluate and establish standards of thermal insulation defect in order to make the basic data necessary for determining the degree of the thermal performance degradation and for repairing and reinforcing the exterior wall of the existing apartment. The following conclusions could be derived thorough the investigation of outer wall temperature distribution and the insulation assesment experiments using a model of specimens for the apartment houses' outer walls. It was confirmed that for the thermal performance through the insulating material thicknesses 5cm, 8cm in walls, the thermal insulation thickened by 3cm, from 5cm to 8cm, but that the actual temperature difference reached only about 1 ~ 2℃. This implies that the thermal performance improvement using the thermal insulation in walls is not significant and that it is difficult to insulate the thermal bridge area.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 봄 학술발표회 논문집
• /
• pp.241-248
• /
• 1999

The existing bridge with deck joint has many problems during construction and maintenance. To overcome these difficulties, an integral bridge, which is defined as the practice of constructing bridges without deck joints, is proposed in this study. A test bridge with 3 spans of PC beam was selected to verify the function of the bridge and is under construction. Characteristics of integral bridge are followings: $\circled1$ Flexible H-piles under the abutment are installed to accommodate thermal movements of the superstructures of bridge. $\circled2$ PC beam of the superstructure and the abutment are integrated. $\circled3$ The existing approach and relief slabs are applied to minimize the stress transfer occurred from the bridge deck to the pavement. $\circled4$ A cyclic control joint is installed between approach and relief slabs to absorb the thermal movement. $\circled5$ It is used a dual direction bearing which is cheaper than single direction bearing and has a good workability as well. It is also installed a shear block on the top of pier coping to protect the lateral movement caused by temperature change and earthquake.

• Steel and Composite Structures
• /
• 제42권4호
• /
• pp.489-499
• /
• 2022

This paper proposes a numerical optimization method to design the mesoscale architecture of textile composite for simultaneously enhancing mechanical and thermal properties, which compete with each other making it difficult to design intuitively. The base cell of the periodic warp and fill yarn system is served as the design space, and optimal fibre yarn geometries are found by solving the optimization problem through the proposed method. With the help of homogenization method, analytical formulae for the effective material properties as functions of the geometry parameters of plain-woven textile composites were derived, and they are used to form the inverse homogenization method to establish the design problem. These modules are then put together to form a multiobjective optimization problem, which is formulated in such a way that the optimal design depends on the weight factors predetermined by the user based on the stiffness and thermal terms in the objective function. Numerical examples illustrate that the developed method can achieve reasonable designs in terms of fibre yarn paths and geometries.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.715-722
• /
• 2001

The main purpose of this study is to evaluate early age thermal stresses and to estimate the risk of thermal cracking in the footings of Hyungsan bridge. In this study, stress analyses are performed for several construction stages using the computation of temperature distributions. The stress analysis results show that, not using the embedded pipe cooling, placing the concrete at once for each footings may cause sever thermal cracking. So, the structures should be constructed with one horizontal construction joint. Then the height of each lifts were determined to be 1.50 meters. Using various time intervals between lifts, temperature and stress.

• 한국강구조학회 논문집
• /
• 제10권1호통권34호
• /
• pp.1-10
• /
• 1998

교량의 신설 또는 보수를 위한 작업차량의 진출입로나 기존 통행차량의 우회를 목적으로 한시적으로 사용되는 가교량은 일반적으로 상부구조로 H-Beam, 하부구조로 H-Pile을 사용하여, 이들 각 부재를 고장력볼트로 연결한 강구조 형식을 채택하고 있다. 그러나 이러한 교량은 상부구조에 신축이음부를 두지 않고 있어 일일기온차에 의해 발생하는 온도응력이 전체 구조거동에 미치는 영향이 클 것으로 예상된다. 따라서, 본 연구에서는 상부구조인 H-Beam에 온도와 변형률의 상시계측을 위한 모니터링 시스템을 도입하여 측정된 온도 및 변형률 데이터로부터 발생온도와 온도응력의 관계를 조사하였으며, 구조해석을 통한 이론치와의 비교를 실시하여 각 부재에서 발생하는 온도응력이 전체 구조거동에 미치는 영향을 평가하였다. 그 결과, 본 구조물에서 발생하는 응력의 변화는 부재의 온도변화에 의한 온도응력이 주원인인 것으로 나타났으며, 하부구조인 H-Pile의 충분한 교축방향 변위로 인하여 상부구조인 H-Beam의 온도변형 구속은 이루어지지 않는 것으로 나타났다. 한편, 상부구조인 H-Beam간의 연결 강성이 충분하지 않아 전체 구조계보다는 부분 구조계에 대한 해석으로부터 얻어진 변형량이 측정 온도 및 응력으로부터 계산된 변형량과 잘 일치하는 것으로 나타났다.