• Textile Coloration and Finishing
• /
• v.24 no.1
• /
• pp.45-53
• /
• 2012

In order to make a supermicrofiber fabric with PET/co-PET sea-island type filament fiber, the optimum conditions of dissolution of co-PET composite filament fiber was examined. The data set was made at various organic acid concentration and steam temperature with treated time as a main variable. At the same time, the microstructure changes by organic acid treatment of sea-island type PET supermicrofibers were monitored by thermal analysis morphology, DSC thermgrams and SEM images. Weight reduction behavior of supermicrofibers by caustic treatment was investigated in a comparative method. The termination of dissolution was also confirmed using DSC thermgrams and SEM images.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.7 no.1
• /
• pp.49-57
• /
• 1989

On this study, we performed the landuse classification using the Landsat data acquired before and after reclamation, and extracted the ground temperature from infrared band(TM band6) data. Using the satellite data, it was possible to extract changes of landuses effectively according to the reclamation, and could obtain the thermal characteristics of the reclaimed area and the surroundings by converting infrared data value into temperatures of surfaces of ground and water. The result of this analysis will be used for the land management of large-scale reclaimed area applying the satellite data and related information.

• Nuclear Engineering and Technology
• /
• v.31 no.1
• /
• pp.116-132
• /
• 1999

This study is intended to analyze the requirements of a buffer material that is one of the major components of the engineered barriers in a high-level radioactive waste repository. The characteristics of potential materials for the buffer in the repository were analyzed and a candidate material was selected. And, based on the current knowledge and the information from various sources, the requirements of a buffer material were evaluated. Finally its quantitative functional criteria on the generic viewpoint has been recommended to be supplied as a guideline for the development of the reference disposal concept and the related buffer material in Korea. The criteria are composed of seven major items, such as hydraulic conductivity, retardation capacity, swelling potential and swelling pressure, thermal conductivity, longevity, organic matter content, and mechanical properties.

• Proceedings of the SAREK Conference
• /
• 2005.11a
• /
• pp.335-340
• /
• 2005

Nonlinear and forced oscillations of supported viscous droplet were focused in the present study. The droplet has a free contact line with solid plate and inviscid fluid. Natural frequencies of a pendant droplet have been investigated experimentally by imposing the acoustic wave while the frequency is being increased at a fixed amplitude. The evaporation was observed at atmosphere pressure. The droplet was recorded throughout the entire evaporation process and transient variations of the volume was measured. The evaporation process of oscillating droplet with thermofoil has been also observed to investigate analyzing the resonance effect on the thermal characteristics of droplet. It is found that a pendant droplet shows the resonant behaviors at each mode similar to the theoretical analysis. During imposing the acoustic wave, the pendant droplet makes a rotating motion in its longitudinal axis which is a new shape oscillation mode. The evaporation rate of a pendant droplet at resonant frequency is significantly enhanced.

• 한국기계연구소 소보
• /
• s.16
• /
• pp.83-94
• /
• 1986

Grinding machine, one of the precision machine tool, requires high accuracy in spindle system. But, recent Inspection and Test reports by KIMM shows high inferio¬rity ratio in home-made grinding machines and points out that this is mainly due to the lack of design ability and assembling technique of spindle system. In this paper, therefore, static stiffness, dynamic characteristics, thermal defor¬mation and error motion of spindle system were studied. With these results, we presented the general data to design and assemble the spindle system. Test of spindle system modified by this study showed that several factors affecting machining accuracy were improved largely.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.5
• /
• pp.33-40
• /
• 2011

In this study, it is quantitatively analyzed for thermal Characteristics of isolation-heat paint which has been supplied to a domestic market through experiments and simulations. In the case of experiment using the container box, it shows 8% decrease on cooling energy consumption in a summer season, but shows increase on heating energy consumption. As a result, the analysis has found increase of energy consumption. As a result of holding simulations with meteorological data of domestic major cities, it shows an increase of energy consumption in domestic condition, and it is hard to expect an energy saving from the isolation-heat paint unless greater air-conditioning load.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.05a
• /
• pp.129-134
• /
• 2009

The dimension of forged part is different from that of die. Therefore, a more precise die dimension is necessarys to produce the precise part, considering the dimensional changes from forging die to final part. In this paper, both experimental and FEM analysis are performed to investigate the effect of several features including die dimension at each forging step and heat-treatment on final part accuracy in the closed-die upsetting. The dimension of forged part is checked at each stage as machined die, cold forged, and post-heat-treatment steps. The elastic characteristics and thermal influences on forging stage are analyzed numerically by the DEFORM-$2D^{TM}$. The effect of residual stress after heat-treatment on forged part could be considered successfully by using DEFOAM-$HT^{TM}$.

• Journal of Welding and Joining
• /
• v.20 no.3
• /
• pp.105-108
• /
• 2002

Al-alloy is utilized widely as a light-weight material to an automobile, a vessel and many kind of equipment, due to the light-weight and its characteristics that is a good tensile strength, elongation and tenacity for bearing heavy load and weight. Al-alloy has the good property of hot working, cold working and corrosion-resistant. But the exiting fusion welding by using Al has some economical and technical problems, but on the other hand, Friction Stir Welding (FSW) that is new joining method can settle the disadvantages that occur to the fusion welding and Is being applied and extended into the various industry fields. On this study, To analyze accurately the mechanical properties of joining area by FSW in Al 6061 alloy by using finite analysis program with finite element method. The size of HAZ and the thermal distribution is simulated and the mechanical properties around the FSW joining area to the Al-alloy 6061 is examined.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.10
• /
• pp.2590-2600
• /
• 1993

The present paper describes numerical predictions for the film cooling effectiveness from a row of hole at various injection ratios and injection alngles.Numerical calculations were performed to investigate film cooling effectiveness and the characteristics of flow and temperature distributions in the region near the downstream of injection hole including the region of adverse pressure gradient. The elliptic 3-dimensional governing equations with variable thermal properties were solved by SIMPLE algorithm. The results showed that the presence of adverse pressure gradient in the region near the downstream of injection hole induces large temperature gradient. At injection angle of $35^{\circ}$ the average film cooling effectiveness was increased as increased of injection ratio up to 1.0. At injection angle of $90^{\circ}$ however, the average film cooling effectiveness was decreased from injection ratio larger than 0.4.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.664-664
• /
• 2013

Red europium(III) and green terbium(III) activating phosphors have been doped and co-doped in gadolinium oxide supports by a hydrothermal method. Scanning electron microscope images reveal that they are one-dimensional nanorods of 40~50 wide and 250~300 nm long. The gadolinium oxide supports show Gd(OH)3 of hexagonal phase and Gd2O3 of cubic crystal structure before and after a thermal annealing, respectively based on X-ray diffraction analysis. Their physicochemical characteristics have further been examined by photoluminescence spectroscopy, FT-IR, UV-visible absorption, and optical microscope. The emission colors are characterized by CIE coordinates. In addition, the emissions from Eu(III) and Tb(III) are assigned to $5D0{\rightarrow}7FJ$ (J=0,1,2,3,4) and $5D4{\rightarrow}FJ$ (J=6,5,4,3), respectively.