• Science of Emotion and Sensibility
• /
• v.2 no.1
• /
• pp.147-155
• /
• 1999

온열쾌적감에 영향을 주는 중요한 요인들로는 온도, 습도, 기류 등의 물리적 요인과 성별이나 체질 등 뿐만 아니라 온열환경에서 느끼는 인간의 감성적인 측면도 요인으로 작용한다. 본 연구에서는 여러 가지 온열 환경 중에서 실내의 상하온도차와 기류방식의 제어에 따른 생체반응의 변화, 및 감성의 변화를 관찰하여 온열환경에 따른 인간의 온열쾌적감을 평가하기 위해 생리신호를 측정, 분석하였다. 인간에게 가장 쾌적함을 주는 최적의 실내 상하온도차와 기류제어방식을 구현하기 위한 평가방법으로 MST(mean skin temperature)분석 및 HRV(heart rate variability) 분석과 EEG 주파수 스펙트럼 분석을 시행하였다. 그 결과 실내의 상하온도차는 23$^{\circ}C$의 머리부위 온도에서 발 부위와의 온도차가 -3$^{\circ}C$일 때 가장 쾌적한 조건으로 나타났고, 기류제어방식은 감성기류조건에서 가장 쾌적함을 보였다. 본 연구를 통해 실내의 상하온도차와 기류방식에 대한 온열환경의 쾌적조건을 설정하였고, HRV 분석과 EEG의 주파수 분석이 주판신소설문평가와 유의한 결과를 나타내어 이러한 생리신호의 분석이 인간의 감성적 측면을 고려한 온열쾌적성을 펑가하는데 보다 객관적이고 신뢰성 있는 평가지표로 이용될 수 있음을 제시하였다.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.4
• /
• pp.761-766
• /
• 2008

Photoresponsive arylether dendrimers Bis-azo-Gn(3,5) 1a-1c and Bis-azo-Gn(3,4,5) 2a-2c (n = 1-3) with an azobenzene unit at the core and several vinyl groups (3,5-bis(but-3-enyloxy)phenyl groups or 3,4,5-tris(but-3- enyloxy)phenyl groups) at the periphery have been prepared. Their structures and reversible trans-cis isomerization behaviors have been investigated by $^1H$-NMR, $^{13}C$-NMR, MALDI-TOF-Mass, and UV-vis spectra. All six azobenzene-cored dendrimers carried out very fast trans $\rightarrow$ cis photoisomerization on irradiation of 350 nm light and reached to the photostationary state within 180 s. During the dark incubation, slow thermal back reversion from cis to trans form is observed for all six dendrimers and is completed within 3 days for 1a-1c and 1 day for 2a-2c. Isomerization efficiency decreases with increasing generation. However, the initial reaction rates of both trans $\rightarrow$ cis photochemical isomerization and cis $\rightarrow$ trans thermal isomerization increases significantly with increasing generation for dendrimers for 1a-1c but only slightly for 2a-2c.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.7
• /
• pp.528-533
• /
• 2013

We focused on the development of red azo colorants with high thermal stability and good solubility for LCD color filter in this research. For the synthesis of hybrid azo colorants, we used the couplers of aniline, naphthol and benzoimidazol functional group. The synthesized hybrid azo colorants were charaterized by using NMR, UV/visible spectroscopy, FT-IR, EA and TGA. They represented the maximum absorption wavelengths which are longer than 500 nm in UV/visible spectrum. So they were confirmed to be suitable for red colorants of LCD color filter. Azo compound (1a, 1b) with aniline functional group had good solubility in organic solvents such as acetone, methanol, chloroform and PGMEA. Moreover azo compounds (1c, 1d and 1e) with naphthol and benzoimidazolone functional group gave excellent thermal stability higher than $250^{\circ}C$ in TGA thermograms.

• Polymer(Korea)
• /
• v.38 no.1
• /
• pp.49-53
• /
• 2014

A novel monomeric UV-absorber was prepared by the reaction of 2,4-dihydroxybenzophenone with N-4-chlorocarbonylphenylmaleimide in the presence of triethylamine. This reactive maleimide was grafted onto polypropylene (PP) by the thermal melt-processing in a mini-max-moulder. IR spectroscopic method was used for the quantitative determination of the extent of grafting of monomeric maleimide. To find the optimal reaction conditions, the dependence of reaction temperature and time and the concentration of monomeric UV-absorber was investigated on the grafting yields. The photooxidative effect of the grafted PP was evaluated in the weatherometer comparing to the PP mixed with UV-absorbers using the carbonyl index of IR spectrum. The grafted PP showed an excellent anti-photooxidative effect.

• Nuclear Engineering and Technology
• /
• v.49 no.5
• /
• pp.1100-1108
• /
• 2017

A thermal-hydraulic system code is an essential tool for the design and safety analysis of a nuclear power plant, and its accuracy quantification is very important for the code assessment and applications. The fast Fourier transform-based method (FFTBM) by signal mirroring (FFTBM-SM) has been used to quantify the accuracy of a system code by using a comparison of the experimental data and the calculated results. The method is an improved version of the FFTBM, and it is known that the FFTBM-SM judges the code accuracy in a more consistent and unbiased way. However, in some applications, unrealistic results have been obtained. In this study, it was found that accuracy quantification by FFTBM-SM is dependent on the frequency spectrum of the fast Fourier transform of experimental and error signals. The primary objective of this study is to reduce the frequency dependency of FFTBM-SM evaluation. For this, it was proposed to reduce the cut off frequency, which was introduced to cut off spurious contributions, in FFTBM-SM. A method to determine an appropriate cut off frequency was also proposed. The FFTBM-SM with the modified cut off frequency showed a significant improvement of the accuracy quantification.

• Nuclear Engineering and Technology
• /
• v.54 no.12
• /
• pp.4743-4750
• /
• 2022

Heat pipe cooled nuclear reactor has been a very attractive technical solution to provide the power for deep space applications. In this paper, a 200 kWe space nuclear reactor power design has been proposed based on the combination of an integrated UN ceramic fuel, a heat pipe cooling system and the Stirling power generators. Neutronics and thermal analysis have been performed on the space nuclear reactor. It was found that the entire reactor core has at least 3.9 $ subcritical even under the worst-case submersion accident superimposed a single safety drum failure, and results from fuel temperature coefficient, neutron spectrum and power distribution analysis also showed that this reactor design satisfies the neutronics requirements. Thermal analysis showed that the power in the core can be successfully removed both in normal operation or under one or more heat pipes failure scenarios.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.5
• /
• pp.509-517
• /
• 2023

The surge in FRP(Fiber Reinforced Plastic) research signifies the industry's pursuit to counteract the longstanding issue of rebar corrosion. Notably, Carbon Fiber Reinforced Plastic(CFRP) emerges as a commendable alternative, given its superior resistance to both corrosion and chemical interactions, thus positing itself as a potential replacement for traditional steel rebars. However, the layered composition of fibers and resin in CFRP flags a notable susceptibility to elevated temperatures. Despite its promise, comprehensive studies elucidating the full spectrum of CFRP properties remain ongoing. In this investigative study, we meticulously assessed the bond strength of CFRP post-exposure to high thermal conditions. Our findings underscored a parity in bond strength amongst silica sand-coated CFRP, rib-type CFRP, and Glass Fiber Reinforced Plastic(GFRP).

• Journal of Sericultural and Entomological Science
• /
• v.36 no.2
• /
• pp.138-146
• /
• 1994

The structural characteristics of Antheraea yamamai and Antheraea pernyi silk were investigated by using x-ray diffraction method, IR spectroscopy and polarizing microscopy. The amino acid composition, fiber density, thermal decomposition temperature and glass transition temperature were also measured for relating these physical properties to the structure in comparison with those of Bombyx mori silk fiber. There was no significant structural difference between A. yamamai and A. pernyi silk fiber on an examination of x-ray diffraction curve and IR spectrum. Both of these wild silk fibers showed double diffraction peaks at the Bragg angle 2Θ16.7˚ and 20.5˚by x-ray diffraction analysis as well as IR absorption peaks for the bending vibration of specific groups related to ala-ala amino acid sequence. On the other hand, the x-ray diffraction curve and IR spectrum of Bombyx mori silk fiber are different from those of wild silk fibers, indicating different crystal structure as well as amino acid sequences. It showed under the polarizing microscope examination that the birefringence and optical orientation factor of wild silk fibers are much lower than those of B. mori silk. Also, the surface of degummed wild silk fibers was characterized by the longitudinal stripes of microfibrils in the direction of fiber axies. The amino acid composition, which is strongly related to the fine structure and properties, was not significantly different between these two wild silk fibers. However, the alanine content was somewhat less and polar amino acid content more for A. yamamai. As a result of fiber density measurement, the specific gravities of B. mori, A. pernyi and A. yamamai were 1.355~1.356, 1.308~1.311, 1.265~1.301g/㎤ in the order, respectively. The calculated crystallinity(%) was 64% for B. mori and 51~52% for wild silk fibers, which showed same trend by IR method in spite of somewhat higher value. The thermal decomposition behaviour was examined by DSC and TGA, showing that the degradation temperature was in the order of B mori, A. prernyi and A. yamamai at around 350$^{\circ}C$. It was also observed by TGA that the decomposition seems to proceed step by step according to their specific regions in the fiber structure, resulting the difference in their thermal stabilities. The glass transition temperature was turned out to be 220$^{\circ}C$ for B. mori, 240$^{\circ}C$ A. yamamai and 255$^{\circ}C$ A. pernyi by the dynamic mechanical analysis. It is expected that the chemical properties are affected by the dynamic mechanical behavior in accordance with their structural characters.

• Korean Chemical Engineering Research
• /
• v.49 no.3
• /
• pp.301-305
• /
• 2011

ABS/silicate composites with different clay types and compositions were prepared by in situ emulsion polymerization. The chemical structure of ABS was confirmed by the change of C-H stretching peak(near 3000 $cm^{-1}$) in fourier transform-infrared(FT-IR) spectrum. The thermal properties of the ABS/silicate composites were investigated by differential scanning calorimetry(DSC) and thermogravimetric analyzer(TGA). There was no distinct change in glass transition temperature of the ABS/silicate composites with different clay types. TGA curve indicates a dramatic increase in degradation temperature in case of ABS/20A composite with 3 wt% 20A. The silicate dispersion in the composites was measured by X-ray diffraction(XRD). The silicate dispersion in ABS/20A composites depended on the 20A composition. XRD results showed that the diffraction peak of the ABS/20A composite appeared when the content of 20A was higher than 5 wt%.

• Composites Research
• /
• v.14 no.6
• /
• pp.47-58
• /
• 2001

This paper describes applications of cure monitoring techniques by using embedded fiber optic strain sensors, which are extrinsic Fabry-Perot interoferometric (EFPI) and/or fiber Bra99 grating (FBG) sensors, to three kinds of molding methods of autoclave, FW and RTM molding methods. In these applications, internal strain of high-temperature curing resin was monitored by EFPI sensors. From theme experimental results, it was shown that strain caused by thermal shrink at cooling stage could be measured well. In addition, several specific matters to these molding methods were considered. As thor an autoclave molding of unidirectional FRP laminates, it was confirmed that off-axis strain of unidirectional FRP could be monitored by EFPI sensors. As for FW molding using room-temperature (RT) cured resin, it was found that the strain outputs from EFPI sensors represented curing shrinkage as well as thermal strain and the convergence meant finish of cure reaction. It was also shown that this curing shrinkage should be evaluated with consideration on logarithmic change in stiffness of matrix resin. As for a RTM melding, both EFPI and FBC sensors were employed to measure strain. The results showed that FBG sensors hale also good potential for strain monitoring at cooling stage, while the non-uniform thermal residual strain of textile affected the FBG spectrum after molding. This study has proven that embedded fiber optic strain sensors hale practical ability of cure monitoring of FRP. However, development of automatic installation methods of sensors remains as a problem to be solved for applications to practical products.