• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.580-584
• /
• 2004

In the present study, an evaluation technology for heating channel layout was investigated in SMC molding system design. Conventional design rules of cooling channel in injection molding process were applied to the present work. Finite element thermal analysis with ANSYSTM was performed to evaluate the temperature distribution of mold surface. SMC mold was manufactured to test the effect of a proposed heating channel layout system on the temperature distribution of mold surface and infrared camera was applied to a measurement of temperature. It was shown that infrared camera application was possible in a measurement of temperature distribution on mold surface.

• 소성∙가공
• /
• 제14권3호
• /
• pp.263-268
• /
• 2005

Heating channel layout design and evaluation technology for SMC molding system was investigated in this work. Traditional rules of cooling channel design in injection molding were applied to the present work. Finite element thermal analysis with $ANSYS^{TM}$ was performed to evaluate the temperature distribution of SHC mold surface. SMC mold was manufactured to evaluate the effect of a proposed heating channel layout system on the temperature distribution of SMC mold surface and infrared camera was applied to a measurement of temperature distribution. It was shown that infrared camera application was possible in a measurement of temperature distribution on SHC mold surface.

• 한국지리정보학회지
• /
• 제7권4호
• /
• pp.143-154
• /
• 2004

원격탐사는 각종 상업용 위성과 항공사진을 바탕으로 이루어진다. 그러나 이러한 자료는 연구자들이 원하는 시기와 장소에 따라 촬영되는데 자료 획득시, 기상조건 및 경제적 이유로 많은 어려움을 겪고 있다. 이러한 문제점을 해결하고자 본 연구에서는 소형비행기 및 초경량 비행기에 탈부착이 가능한 소형 다중분광 자동 항공촬영시스템(PKNU2)을 개발하였다. PKNU2호는 연구실 자체 보유한 고해상도 가시대역, 적외선대역 카메라를 이용하여 칼라영상 및 적외 영상을 획득하였다. 환경감시 등의 목적으로 칼라 적외 합성영상을 생성, 분석하였으나 그리 만족스러운 결과를 획득하지 못하였다. 또한 PKNU2호가 대용량 촬영은 가능하였지만 데이터 저장시간이 12초로 횡중복률 60%를 만족시키지 못하였다. 현재 우리는 PKNU2호의 단점을 극복하고자 가시대역과 적외선 대역의 자료를 한번에 획득할 수 있 칼라 적외선 분광카메라, 열적외 카메라, 그리고 영상의 실시간 저장이 가능한 MPEG board를 도입하여 헬리콥터에 탈부착이 가능한 소형 다중분광 자동 항공촬영시스템(PKNU3)을 개발하고 있다. 본 연구에서는 본격적인 촬영에 앞서 가치 있는 영상 획득을 위해 센서의 특성 평가를 실시, 센서의 분광 특성 보정 및 렌즈의 기하학적 왜곡 보정을 작업을 실시하였다.

• 한국지반공학회논문집
• /
• 제39권7호
• /
• pp.69-76
• /
• 2023

지반의 공동은 지반 침하를 야기하고 사고 발생 후에는 이를 보수하기 위해서도 많은 시간적및 경제적 손실이 발생한다. 본 연구에서는 적외선 카메라를 새로운 계측 수단으로 활용하여 지하 공동의 탐지 가능성을 실험적으로 평가하고자 하였다. 적외선 카메라로 정확한 온도를 평가하기 위해서는 물체에서 방출하는 에너지를 탐지해야 하며 이때 방사율 값이 필수적으로 이용된다. 현장 실험 시 적외선 카메라와 물체의 합리적인 거리를 평가하기 위하여 방사율을 고정하고 거리 변화에 따른 온도 값을 평가하였다. 이를 통해 현장 실험 조건을 구성하였다. 현장 실험의 동공은 5cm 직경의 PVC pipe 관으로 모사하였으며, 지표를 기준으로 5cm와 25cm에 인위적으로 매설하였다. 적외선 카메라는 오후 4시부터 다음날 오후 3시까지(총 23시간) 측정하였으며, 온도의 시계열 분포뿐만 아니라 단위 시간당 변화량인 cooling rate index 방법을 통해서도 분석하였다. 분석결과는 공동 위치에 따라 온도 변화 추세가 상이하게 나타났으며, 이를 통해 적외선 카메라로 지반 내부의 상태를 평가할 수 있는 가능성을 보여준다.

• 한국생산제조학회지
• /
• 제18권3호
• /
• pp.285-293
• /
• 2009

Thermal infrared cameras have been conducted actively in various application areas, such as military, medical service, industries and cars. Because of their characteristic of sensing the radiant heat emitted from subjects in the range of long-wavelength($3{\sim}5{\mu}m$ or $8{\sim}12{\mu}m$), and of materializing a vision system, when general optics materials are used, they don't react to the light in the range of long-wavelength, and can't display their optic functions. Therefore, the materials with the feature of higher refractive index, reacting to the range of long-wavelength, are to be used. The kinds of materials with the characteristic of higher refractive index are limited, and their features are close to those of metals. Because of these metallic features, the existing producing method of optical systems were direct manufacturing method using grinding method or CAD/CAM, which put limit on productivity and made it difficult to properly cope with the increasing demand of markets. GASIR, a material, which can be molded easily, was selected among infrared ray optics materials in this study, and the optical system was designed with two Aspheric lenses. Because the lenses are molded in the environment of high temperature and high pressure, they require a special metallic pattern. The metallic pattern was produced with materials with ultra hardness that can stand high temperature and high pressure. As for the lens mold, GMP(Glass Molding Press) of the linear transfer method was used in order to improve the productivity of optical systems for thermal infrared cameras, which was the goal of this paper.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.273-275
• /
• 2005

Active thermography is being used since several years for remote non-destructive testing. It provides thermal images for remote detection and imaging of damages. Also, it is based on propagation and reflection of thermal waves which are launched from the surface into the inspected component by absorption of modulated radiation. For energy deposition, it use external heat sources (e.g., halogen lamp or convective heating) or internal heat generation (e.g., microwaves, eddy current, or elastic wave). Among the external heat sources, the ultrasound is generally used for energy deposition because of defect selective heating up. The heat source generating a thermal wave is provided by the defect itself due to the attenuation of amplitude modulated ultrasound. A defect causes locally enhanced losses and consequently selective heating up. Therefore amplitude modulation of the injected ultrasonic wave turns a defect into a thermal wave transmitter whose signal is detected at the surface by thermal infrared camera. This way ultrasound thermography(UT) allows for selective defect detection which enhances the probability of defect detection in the presence of complicated intact structures. In this paper the applicability of UT for fast defect detection is described. Examples are presented showing the detection of defects in PCB material. Measurements were performed on various kinds of typical defects in PCB materials (both Cu metal and non-metal epoxy). The obtained thermal image reveals area of defect in row of thick epoxy material and PCB.

• 한국터널지하공간학회 논문집
• /
• 제14권3호
• /
• pp.197-213
• /
• 2012

디스크커터는 암석의 절삭을 위해 TBM에 사용되는 핵심 굴착도구이다. 본 연구에서는 디스크커터에 의한 암석의 절삭 시에 커터 링에 발생하는 변형특성을 파악하기 위하여, 경암에 대한 선형절삭실험 시에 커터 링에 부착한 일련의 변형률게이지와 적외선 열화상 카메라에 의한 계측을 실시하였다. 실험결과, 커터 링은 매우 뚜렷한 선형탄성 거동을 보였으며, 암석 절삭에 의한 커터 링의 온도 상승은 $14.4^{\circ}C$ 이내로 나타났다. 따라서 본 연구에서 수행한 선형절삭실험 조건에서는 절삭으로 인한 커터 링의 변형과 온도상승이 크지 않았음을 알 수 있었다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2002년도 추계학술발표회요약집
• /
• pp.120-120
• /
• 2002

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.35-36
• /
• 2006

In Nd:YAG laser welding, evaluation methods of welding flaw are various. But, the method due to fume shape is difficult to classification of welding flaw. The Nd:YAG laser process is known to have high speed and deep penetration capability to become one of the most advanced welding technologies. At the present time, some methods are studied for measurement of fume shape by using high-speed camera and photo diode. This paper describes the machining characteristics of SM45C carbon steel welding by use of an Nd:YAG laser. In spite of its good mechanical characteristics, SM45C carbon steel has a high carbon contents and suffers a limitation in the industrial application due to the poor welding properties. In this study, fume shape was measured by infrared thermal camera that is non-contact/non-destructive thermal measurement equipment through change of laser generating power, speed, focus. Weld was performed on bead-on method. Measurement results are compared as two equipments. Here, two results are composed of measurement results of fume quantities due to fume shape by infrared thermal camera and inspection results of weld bead include weld flaws by ultrasonic inspector.

• 한국산업융합학회 논문집
• /
• 제24권6_2호
• /
• pp.927-935
• /
• 2021

This study conducted a study to improve the problems of the existing fire sensor system. In the case of the existing system, it took more than 3 minutes to detect a fire even at a short distance, making it difficult to extinguish the initial fire. In order to improve these problems, in this study, a fire detection system using an infrared thermal imaging camera was studied. The infrared image-based fire detection system is relatively wide and can detect fire over a long distance, so it has the advantage of being applicable to many fire detection systems. As a result of conducting a field test using the fire detection system, a fire that occurred about 2 km ahead was detected within about 10 seconds. Since the fire detection function of this system can detect within 10 seconds from a distance of about 2 km, it was applicable to forest fires that occur frequently in spring and autumn.