• International journal of advanced smart convergence
• /
• 제5권2호
• /
• pp.18-23
• /
• 2016

Cell walls of microalgae consist of a polysaccharide and glycoprotein matrix providing the cells with a formidable defense against its environment. Anaerobic digestion (AD) of microalgae is primarily inhibited by the chemical composition of their cell walls containing biopolymers able to resist bacterial degradation. Adoption of pre-treatments such as thermal, thermal hydrolysis, ultrasound and enzymatic hydrolysis have the potential to remove these inhibitory compounds and enhance biogas yields by degrading the cell wall, and releasing the intracellular algogenic organic matter (AOM). This paper preproposal stage investigated the effect of different pre-treatments on microalgae cell wall, and their impact on the quantity of soluble biomass released in the media and thus on the digestion process yields. This Paper present optimum approach to degradation of the cell wall by ultra-sonication with practical design specification parameter for ultrasound based pretreatment system. As a result of this paper presents, a microalgae system in a wastewater treatment flowsheet for residual nutrient uptake can be justified by processing the waste biomass for energy recovery. As a conclusion on this result, Low energy harvesting technologies and pre-treatment of the algal biomass are required to improve the overall energy balance of this integrated system.

• 한국세라믹학회지
• /
• 제50권6호
• /
• pp.434-438
• /
• 2013

Monodispersed 3Y-$ZrO_2$ spherical agglomerates were synthesized by thermal hydrolysis process followed by crystallization processes (hydrothermal treatment and calcination). The crystallization process affected the properties of the final particles, such as the primary particle size, the agglomeration state, and the fraction of $ZrO_2$ monoclinic phase. The hydrothermal treated spherical particles were porous microstructures (weak agglomerates) composed of small primary particles with a size of 14 nm, but the calcined spherical particles had a dense microstructure due to the hard aggregation between primary particles. While the calcined particles had a low green density due to the hard aggregation, hydrothermal treated ones were soft agglomerates and had a deflection point at 50 MPa due to the rearrangement of secondary spherical particles and the filling of the interstices with the primary particles. Finally, the green density of hydrothermally treated $ZrO_2$ particles was 58% at 200 MPa.

• Journal of Microbiology and Biotechnology
• /
• 제23권8호
• /
• pp.1133-1139
• /
• 2013

Enzymatic decomposition of gelatin layers on used X-ray films and repeated utilization of the enzyme for potential application in silver recovery were investigated using keratinolytic serine proteases from Purpureocillium lilacinum LPS # 876. At pH 9.0, the enzymatic reaction was enhanced by the increase of enzyme concentration or by the increase of the temperature up to $60^{\circ}C$. Under the conditions of 6.9 U/ml, $60^{\circ}C$, and pH 9.0, hydrolysis of the gelatin layers and the resulting release of silver particles were achieved within 6 min. The protective effect of polyols against thermal denaturation was investigated. The presence of glycerol and propylene glycol increased enzyme stability. When the reusability of the enzyme for gelatin hydrolysis was tested, it could be seen that it could be effectively reused for more cycles when glycerol was added, compared with the enzyme without protective agents. The results of these repeated treatments suggested that a continuous process of recycling silver from used X-ray is feasible. Keeping in mind that recycling is (at the present time) needed and imperative, it can be remarked that, in this research, three wastes were successfully used: hair waste in order to produce serine proteases; glycerol in order to enhance enzyme thermal stability; and used X-ray films in order to recover silver and PET films.

• 분석과학
• /
• 제5권4호
• /
• pp.443-454
• /
• 1992

o-Chlorobenzylidenemalononitrile(CS), chloroacetophenone 및 bromophenylacetonitrile의 이성질체와 같은 최루 자극성 물질들의 가수분해, 산화, 환원, 열분해 및 대사에 의한 화합물의 분석은 법과학적 측면에서 주요한 의미가 있다. 본 실험에서는 10% MeOH-$H_2O$ 및 10% dioxane-$H_2O$ 용액에서 pH 1.0~11.0과 온도 변화에 따른 CS의 가수분해 조건을 검토하고 가수분해 생성물이 o-chlorobenzaldehyde와 malononitrile임을 분광학적 방법 및 전기화학적 방법에 의해 확인하였다.

• 한국축산식품학회지
• /
• 제34권2호
• /
• pp.151-157
• /
• 2014

This study investigated the effects of three proteases (trypsin, pepsin and chymotrypsin) on the hydrolysis efficiency of porcine placenta and the molecular weight (Mw) distributions of the placental hydrolysates. Because placenta was made up of insoluble collagen, the placenta was gelatinized by applying thermal treatment at $90^{\circ}C$ for 1 h and used as the sample. The placental hydrolyzing activities of the enzymes at varying concentrations and incubation times were determined by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) and gel permeation chromatography (GPC). Based on the SDS-PAGE, the best placental hydrolysis efficiency was observed in trypsin treatments where all peptide bands disappeared after 1 h of incubation as compared to 6 h of chymotrypsin. Pepsin hardly hydrolyzed the placenta as compared to the other two enzymes. The Mw distribution revealed that the trypsin produced placental peptides with Mw of 106 and 500 Da. Peptides produced by chymotrypsin exhibited broad ranges of Mw distribution (1-20 kDa), while the pepsin treatment showed Mw greater than 7 kDa. For comparisons of pre-treatments, the subcritical water processing (37.5 MPa and $200^{\circ}C$) of raw placenta improved the efficiency of tryptic digestions to a greater level than that of a preheating treatment ($90^{\circ}C$ for 1 h). Consequently, subcritical water processing followed by enzymatic digestions has the potential of an advanced collagen hydrolysis technique.

• Macromolecular Research
• /
• 제15권6호
• /
• pp.587-594
• /
• 2007

Well defined amphiphilic diblock copolymers of poly(styrene-b-vinylbenzylphosphonic acid) (PS-b-PVBPA) were prepared by controlled radical polymerization technique, two-step hydrolysis reactions using trime-thylsilyl bromide from the corresponding phosphonic ethyl ester. By indirect, backward pH titration of the block copolymer, a good titration curve of a dibasic acid was observed. The IEC values obtained from both backward pH titration and volumetric back titration were almost identical. Thermal gravimetric analysis (TGA) of the phosphonic acid containing block copolymer showed a high thermal stability up to $400^{\circ}C$.

• 대한가정학회지
• /
• 제19권2호
• /
• pp.213-221
• /
• 1981

This theiss deals with the effects of addition of silicone oil to the polymerization and oxidation of frying oil in the practical deep fat frying process. The measurement of frying oil stability was carried out under various silicone oil content and compared with controlled frying process. In controlled frying process A.V., C.O.V., TBA, and contents of petroleumether insoluble fatty acids were increased as time was increased. It means thermal oxidized polymerization and hydrolysis of frying oil was occurred. When silicone oil was added to frying oil, it's thermal stability was better than that of the controlled oil and the degree of thermal stability was changed according to the contents of silicone oil. We obtained the highest degree of thermal stability when silicone oil was added 1ppm.

• Korean Chemical Engineering Research
• /
• 제48권1호
• /
• pp.103-109
• /
• 2010

하폐수 처리과정에서 발생되는 슬러지는 주로 혐기소화에 의해 처리되며 슬러지를 감량하고 메탄을 생산할 수 있어 많이 이용되고 있다. 슬러지의 전처리는 혐기소화의 율속단계인 가수분해를 높여 처리속도를 향상시키므로 많은 연구가 진행 중이다. 본 연구에서는 열, 초음파, 열-알칼리의 전처리 기술에 따른 슬러지의 가수분해(가용화) 효과와 전처리한 슬러지를 혐기소화하여 메탄 생산량과 슬러지의 감량 효과를 비교하였다. 하수와 폐수 슬러지 가용화율은 열-알칼리 동시 처리한 경우에는 67과 70%로 가장 높았고 다음으로 초음파 처리와 열처리가 40% 이상의 비슷한 가용화율을 보였다. 혐기소화 가스의 메탄 함량은 45~70% 범위로 유지되었고 전처리한 슬러지가 control에 비해 높게 나타났다. 메탄 생산량은 열처리, 초음파 처리, 열-알칼리를 같이 처리한 경우가 control에 비해 각각 하수슬러지는 2.6, 2.7, 3.5배, 폐수 슬러지는 3.5, 4.1, 4.2배 증가하였다. 혐기소화 슬러지의 감량효과는 전처리한 슬러지가 control에 비해 5~19% 포인트 높게 나타났으며 열-알칼리 처리한 경우가 초음파와 열처리에 비해 우수한 감량 효과를 보였다. 위의 결과로부터 전처리가 메탄 생산량에서 뿐만 아니라 슬러지 처리처분 비용 절감에 있어서도 중요한 역할을 함을 확인할 수 있었고 열-알칼리 동시 처리가 가장 우수한 성능을 보였다.

• 전기학회논문지
• /
• 제67권3호
• /
• pp.448-453
• /
• 2018

PV module protective film plays an important role in protecting the solar cell from external environment by anti-hydrolysis polyester, UV resistance and mechanical properties. The backsheet was manufactured by using Roll-to-Roll dry laminating process. The backsheet structure is composed of 3 layers, which are PE, PET, and Fluorine polymer films. In this study, we have experimented the variation of thermal conductivities depending on MgO inputs 10% to 25% in order to confirm the dependence of the module efficiencies. High thermal conductive backsheet can increase the module output power efficiency because the heat is dissipated by spreading out the internal heat. Long-term environment weatherability tests were conducted for confirming 25 year reliability in the field such as PCT, UV, and power efficiency degradations. As the evaluation result, high thermal conductivity can be effective for increase of power efficiency of solar panel by using thermal conductive MgO masterbatch.

• KEPCO Journal on Electric Power and Energy
• /
• 제2권3호
• /
• pp.447-452
• /
• 2016

It is imperative to develop an effective pathway to depolymerize lignin into liquid fuel that can be used as a bioheavy oil. Lignin can be converted into liquid products either by a solvent-free thermal cracking in the absence air, or thermo-chemical degradation in the presence of suitable solvents and chemicals. Here we show that the solvent-assisted liquefaction has produced promising results in the presence of metal-based catalysts. The supercritical ethanol is an efficient liquefaction solvent, which not only provides better solubility to lignin, but also scavenges the intermediate species. The concentrated sulfuric acid hydrolysis lignin (CSAHL) was completely liquefied in the presence of solid catalysts (Ni, Pd and Ru) with no char formation. The effective deoxy-liquefaction nature associated with scEtOH with aid hydrodeoxygenation catalysts, resulted in significant reduction in oxygen-to-carbon (O/C) molar ratio up to 61%. The decrease in oxygen content and increase in carbon and hydrogen contents increased the calorific value bio-oil, with higher heating value (HHV) of $34.6MJ{\cdot}Kg^{-1}$. The overall process is energetically efficient with 129.8% energy recovery (ER) and 70.8% energy efficiency (EE). The GC-TOF/MS analysis of bio-oil shows that the bio-oil mainly consists of monomeric species such as phenols, esters, furans, alcohols, and traces of aliphatic hydrocarbons. The bio-oil produced has better flow properties, low molecular weight, and high aromaticity.