• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 춘계학술발표대회 논문집
• /
• pp.92-97
• /
• 2011

Nowdays the most critical problem is global warming and the most important reason is the high emition of carbondioxide. 23% of the use of carbondioxide is used in building and decreasing the use of it is very important. One of the biggest factor that can decrease the use of energy is developing the heat conducting ratio of the materials we use in building. Heat conducting ratio is the important factor in the use of reducing energy comsumation. In this research, there are methods about how to measure the heat conducting ratio, and the existing the representing measuring method which is Heat Flow Meter HFM 436, Laser Flash Analysis and find out about the TCi of the new method C-Therm and compare the results.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.557-560
• /
• 2008

Window system is an essential component for ventilation, lighting, and thermal environment in buildings. However, window system has the lowest insulation performance and may cause high energy consumptions, if it is not properly designed. Thus, performance of window systems play an important role in built environment. This study proposes a new window systems for balcony, which has double vents and analyses the thermal performance using an intergrated simulation method with Therm 6.1 and Widow 6.1. The result shows higher U-factor than conventional window systems. It is expected that the double vent window system can increase thermal performance and save energy in apartment houses.

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 2000년도 전지기술심포지움
• /
• pp.109-118
• /
• 2000

• 한국식품과학회지
• /
• 제22권4호
• /
• pp.479-485
• /
• 1990

증발 농축공정중 각종 운전 조건의 제어 및 데이터 수집을 자동으로 하기 위하여 제어 및 데이터 수집 부위에 각종 조절기와 센서를 부착하여 컴퓨터 프로그램에 의하여 공정이 진행되도록 하였다. 증발 농축 장치는 원심식 박막증발기인 Centri-Therm$(CT-1B,\;{\alpha}-Laval\;Co.,\;Sweden)$이 이용되었으며 제어 변수로는 증발기의 압력, 급액 속도, 증기의 온도 및 냉각수의 유량 등을 택했다. 그리고 데이타 수집 부위로는 급액 및 농축액의 온도와 농도, 냉각수의 입구 및 출구 온도, 증기의 온도, 증발 온도, 원료 및 농축액의 중량 변화, 응축수의 양 등을 택했다. 운전 프로그램은 PASCAL language를 이용해 작성하였으며 전 공정은 균일하게 콘트롤되었다. 냉각수는 밸브 콘트롤러에 의해 시간당 125kg의 유속으로 흐르도록 하였으며 급액 속도 125/h에서 최대 증발 속도는 41.7kg/h였다.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2010년도 추계 학술논문요약집
• /
• pp.347-348
• /
• 2010

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 추계학술대회 논문집
• /
• pp.67-68
• /
• 2008

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 추계학술대회 논문집
• /
• pp.589-590
• /
• 2009

• 한국주거학회논문집
• /
• 제16권4호
• /
• pp.81-89
• /
• 2005

The purpose of this thesis is thermal performance simulation about various type that can apply in the high-rise residential building to estimate condensation performance of window that is consisted of frame and glazing in curtain wall. The result of this thesis are summarized as follows. First, condensation occurrence point when relative humidity is $30{\cdot}40{\cdot}50\%$ is shortest Low-e double glass. Difference by type of gas and spacer was a little by $2{\~}6$ cm, among it, the case that apply krypton in gas and the case that apply double seal in spacer were less condensation occurrence distribution. Second, when analyzed improved proposal of window and existing plan through simulation, improved proposal is superior from general side of the interior and exterior temperature, thermal break surrounding temperature and temperature of frame end, condensation occurrence point etc. Therefore, if it was used improved proposal with effect that improve in curtain wall of high-rise residential building, it may improve window condensation performance of curtain wall.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 추계학술발표대회 논문집
• /
• pp.231-235
• /
• 2009

According to flow of energy, the loss occurs through walls, roofs, windows and so on. Among these case, most of the loss that is about 45% occurs through windows. windows's U-value is six times higher than wall's one according to Building code, so the loss through windows accounts for very much rates. Currently, Exterior wall's U-value about building envelope is 0.35~0.58W/ mK, but windows's one is 3.3W/ mK. It means that the loss through windows occupy very much amounts relatively. Therefore, the solution is required to reduce energy loss and increasing displeasure caused by excessive influx of solar energy through windows, to solve the problems Like decoloration on indoor furniture an clothes by harmful ultraviolet rays, air conditioning and increased cost. Therefore, on this paper, Thermal Performance was evaluated through actual test about high insulation Super Window which can improve thermal performance and the Simulation result was compared with actual resul by using Simulation program WINDOW and THERM.

• 한국항공우주학회지
• /
• 제41권10호
• /
• pp.779-787
• /
• 2013

항공기 추진 시스템의 IR 피탐지성 감소 연구를 위해 항공기 노즐형상 변화에 따른 IR 신호의 영향성을 연구하였다. 이를 위해 가상의 아음속 무인기를 선정하고, 임무분석 및 성능 해석을 통해 엔진을 결정한 후 전체 임무를 만족시키는 원형 노즐을 설계하였다. 또한 다수의 설계변수를 적용하여 다양한 형상의 노즐을 설계하였다. 압축성 CFD 코드를 이용하여 열유동장 및 노즐표면 온도를 분석하였다. 또한 열유동장 해석 결과를 바탕으로 narrow-band 모델과 RadThermIR을 기반으로 하여 항공기 플룸 및 노즐표면 IR 신호를 계산하였다. 계산된 플룸 및 고체 IR신호를 분석, 비교하여 항공기 IR 신호 특성에 관한 정성적 정보를 도출하였다.