• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.8
• /
• pp.409-417
• /
• 2015

A simplified rotary heat-exchanger model was developed with an assumption of a linear temperature distribution along the flow direction. Based on the model, the exact fluid solution and solid temperature variations were obtained and verified from a comparison with previous numerical studies. The heat transfer in the rotary heat exchanger was investigated using the theoretical solutions. The heat exchanger's effectiveness was shown to be saturated, with a rotational-speed increase that is higher than a critical value that is solely dependent on the thermal capacity of the solid matrix but independent of the fluid flow rate; the saturated value of the effectiveness was determined only by the NTU of the heat exchanger. Where the thermal diffusivity of the solid matrix is so slight that the thermal penetration depth becomes smaller than the matrix thickness, the effective thermal capacity of the solid matrix decreased according to the penetration depth.

• Smart Structures and Systems
• /
• v.14 no.2
• /
• pp.247-266
• /
• 2014

Conventional cantilevered piezoelectric energy harvesters (PEHs) are usually fabricated with continuous electrode configuration (CEC), which suffers from the electrical cancellation at higher vibration modes. Though previous research pointed out that the segmented electrode configuration (SEC) can address this issue, a comprehensive evaluation of the PEH with SEC has yet been reported. With the consideration of delivering power to a common load, the AC outputs from all segmented electrode pairs should be rectified to DC outputs separately. In such case, theoretical formulation for power estimation becomes challenging. This paper proposes a method based on equivalent circuit model (ECM) and circuit simulation to evaluate the performance of the PEH with SEC. First, the parameters of the multi-mode ECM are identified from theoretical analysis. The ECM is then established in SPICE software and validated by the theoretical model and finite element method (FEM) with resistive loads. Subsequently, the optimal performances with SEC and CEC are compared considering the practical DC interface circuit. A comprehensive evaluation of the advantageous performance with SEC is provided for the first time. The results demonstrate the feasibility of using SEC as a simple and effective means to improve the performance of a cantilevered PEH at a higher mode.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.60 no.5
• /
• pp.95-104
• /
• 2018

The purpose of this study was to explore the extent of difficulties experienced by facilitators in the rural field forum and to derive a theoretical model for improving the satisfaction of facilitators in the rural field forum. Based on grounded theory, qualitative analysis used data collected through individual in-depth interviews with 10 facilitators who are working at the rural field forum. This collected data was analyzed using the Nvivo 11 program. Using a derived theoretical model, the result of analyzing the difficulties experienced by facilitators in the rural field forum showed the core phenomenon identified as difficulties on-site the forum. There was a clarification of the issues regarding improvement of their labour conditions in order to solve the difficulties on-site the forum. The issues towards improving labour conditions were low allowance, equal assignment, guaranteed four major insurances and so on. The facilitators have been trying to activate the rural field forum by promoting their own capacity through the cooperation between colleagues, post training, seminars, and conferences.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.11 no.1
• /
• pp.1-9
• /
• 2003

The examinations of the operating mechanism of an oscillating capillary tube heat pipe (OCHP) using the visualization method revealed that the working fluid in the OCHP oscillated to the axial direction by the contraction and expansion of vapor plugs. The contraction and expansion were due to the formation and extinction of bubbles in the evaporating and condensing part, respectively The actual physical mechanism, whereby the heat which was transferred in such an OCHP was complex and not well understood. In this study, a theoretical model of the OCHP was developed to model the oscillating motion of working fluid in the OCHP. The differential equations of two-phase flow were applied and simultaneous non-linear partial differential equations were solved. From the analysis of the numerical results, it was found that the oscillating motion Of working fluid in the OCHP was affected by the operation and design conditions such as the heat flux, the charging ratio of working fluid and the hydraulic diameter of flow channel. The simulation results showed that the proposed model and solution could be used for estimating the operating mechanism in the OCHP.

• Korean Management Science Review
• /
• v.20 no.2
• /
• pp.113-133
• /
• 2003

This study developed the ISM (Electronic Store Success Model) by basing upon the revised D&M IS Success Model and reflecting the characteristics of marketing and e business. The theoretical rationale of this model was as following : 1) Though the revised D&M IS Success Model (2002) must be more logical and complete model than the original D&M IS Success Model (1992), it did not reflect characteristics of marketing and e business. 2) In the marketing studios, Service Quality has been suggested as one of basic strategies for success. 3) In e business studies, Trust has been emerging as a potentially important antecedent of e loyalty. 4) There has been a paradigm shift from satisfaction to loyalty in marketing emphasis. 5) Nowadays, ERP (Enterprise Resource Planning) has been pervaded in many organizations and has supported PCA (Profit Center Accounting) or Channel based Accounting, so it has not been difficult to evaluate financial performance of Electronic Store. The ESM that has six dimensions (System Quality, information Quality. Service Quality, Trust, Loyalty, Financial Performance) and expresses the causal relationship among them was proposed and was compared with BSC (Balanced Scorecard), WebQual, and EWAM (Extended Web Assessment Method). The results showed that the ESM coincides with BSC and contains dimensions of WebQual, and EWAM.

• East Asian Journal of Business Economics (EAJBE)
• /
• v.4 no.2
• /
• pp.1-11
• /
• 2016

This study investigated commercial power theory of traditional market through the analysis of literature review. Consumers' store selection models are made up a theory based on normative hypothesis, theory of mutual reaction, utility function estimation model, and cognitive-behavioral model. Detailed models are as follows. Normative hypothesis based theory is divided into Reilly's retail gratification theory and Converse's revised retail g ratification theory. Interaction theory is composed of Huff's probability gratification theory, MCI model and Multi-nominal Logit Model (MNL model). There are four models in retail organization position theory such as central place theories, single store position theory, multi store position - assign model, and retail growth potential model. In case of single store position theory, theoretical and empirical techniques have developed for a decision to optimum single store position. Those are like these, a check list, the most simple and systematic method, analogy, and microanalysis technique. Aforementioned models are theoretical and mathematical commercial power measurement and/or model. The study has rather limitations because the variation factors included in formula are only a part of actual commercial power. Therefore, further study shall be made continuously to commercial power areas and variables.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.2
• /
• pp.177-185
• /
• 2013

A new theoretical derailment coefficient model of wheel-climb derailment is proposed to consider the influence of wheel unloading. The derailment coefficient model is based on the theoretical derailment model of a wheelset that was developed to predict the derailment induced by train collisions. Presently, in domestic derailment regulations, a derailment coefficient of 0.8 is allowable using Nadal's formula, which is for a flange angle of $60^{\circ}$ and a friction coefficient of 0.3. However, theoretical studies focusing on different flange angles to justify the derailment coefficient of 0.8 have not been conducted. Therefore, this study theoretically explains a derailment coefficient of 0.8 using the proposed derailment coefficient model. Furthermore, wheel unloading of up to 50% is accepted without a clear basis. Accordingly, the correlation between a wheel unloading of 50% and a derailment coefficient of 0.8 is confirmed by using the proposed derailment coefficient model. Finally, the validity of the proposed derailment coefficient model is demonstrated through dynamic simulations.

• The Journal of Information Systems
• /
• v.27 no.2
• /
• pp.197-219
• /
• 2018

Purpose The purpose of this study is to examine what motivates users to adopt one of the emerging applications for collaborative consumption of sharing economy. Using the self-determination theory, motivation theory and TAM(Technology Acceptance Model) as the theoretical framework, this study illustrates important factors that influence adoption of collaborative consumption service. We develops the ICTs(Information and Communications Technologies) initiatives and motivation model to collaborative consumption. Design/methodology/approach This paper makes use of a quantitative methodology using survey questionnaire that allows for the measurement of the eight constructs(System Availability, Contents Quality, Design & Personalization, Security & Privacy, Emotional & Social Value, Economic Value, Attitude, Adoption & Consumption) contained in the hypothesized theoretical model on the basis of the prior literatures. Data collected from a sample of 227 respondents who have used the collaborative consumption services and provided the foundation for the examination of the proposed relationships in the model. Findings This study has the following implications for the users and providers of CC platforms and services. The ICTs initiatives (System Availability, Contents Quality, Design & Personalization, Security & Privacy) are the influential factors that motivate the emotional and social value to CC. On the other hand, The ICTs initiatives (System Availability, Contents Quality) are not very significant factors of economic value to CC. The empirical analysis result indicate that there are significant causal effect among emotional & social value, economic value, and adoption to CC. This study provides important theoretical implications for innovation adoption research through an empirical examination of the relationship between ICTs initiatives, motivation factors to collaborative consumption in the sharing economy.

• Wind and Structures
• /
• v.22 no.2
• /
• pp.253-272
• /
• 2016

The paper concerns with the method and results of wind tunnel investigations of the Strouhal number (St) of a stationary iced cable model of cable-supported bridges with respect to different angles of wind attack. The investigations were conducted in the Climatic Wind Tunnel Laboratory of the Czech Academy of Sciences in $Tel{\check{c}}$. The methodology leading to the experimental icing of the inclined cable model was prepared in a climatic section of the laboratory. The shape of the ice on the cable was registered by a photogrammetry method. A section of an iced cable model with a smaller scale was reproduced with a 3D printing procedure for subsequent aerodynamic investigations. The St values were determined within the range of the Reynolds number (Re) between $2.4{\cdot}10^4$ and $16.5{\cdot}10^4$, based on the dominant vortex shedding frequencies measured in the wake of the model. The model was oriented at three principal angles of wind attack for each of selected Re values. The flow regimes were distinguished for each model configuration. In order to recognize the tunnel blockage effect the St of a circular smooth cylinder was also tested. Good agreement with the reported values in the subcritical Re range of a circular cylinder was obtained. The knowledge of the flow regimes of the airflow around an iced cable and the associated St values could constitute a basis to formulate a mathematical description of the vortex-induced force acting on the iced cable of a cable-supported bridge and could allow predicting the cable response due to the vortex excitation phenomenon.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4C
• /
• pp.275-282
• /
• 2006

Since tunnels are linear type structures that have a long extent in comparison to their excavation or inner section, tunnels must be constructed in various ground conditions. In this study, laboratory model tests and theoretical analysis on a tunnel loads are carried out in the unconsolidated ground with inclined layers for tunnel excavation. Laboratory model tests are performed with the variation in the angle of the inclined layers and tunnel depth for the model ground with inclined layers. As for the ground materials, two dimensional model ground is prepared with aluminum rods and blocks with no cohesion, which are frictional resistance free between testing apparatus walls and ground materials, by establishing the ground materials self-supporting. Moreover tunnel load equation are newly induced so that comparisons between model test results and the theoretical results are conducted as well.