• Journal of Power Electronics
• /
• v.18 no.1
• /
• pp.160-170
• /
• 2018

For high power photovoltaic (PV) grid-connected converters, high order filters such as multi-tuned filters and Traps+RC filters with outstanding filtering performance have been widely researched. In this paper, the optimization of a multi-tuned filter with a low damping resistance and research on its corresponding control scheme have been combined to improve the performance of the proposed filter. Based on the characteristics of the switching harmonics produced by PWM, the proposed filter is optimized to further improve its filtering performance. When compared with the more common Traps+RC filter, the advantages of the proposed filter with low damping resistances in attenuating the major switching harmonics have been demonstrated. In addition, a simpler topology and reduced power loss can be achieved. On the other hand, to make the implementation of the proposed filter possible, on the base of the unique frequency response characteristic of the proposed filter, a digital single-loop control scheme has been proposed. This scheme is a simple and effective means to suppress the resonance peak caused by a lack of damping. Therefore, a smaller volume, better efficiency of the proposed filter, and easy implementation of the corresponding control scheme can be realized. Finally, the superiority of the proposed filter topology and control scheme is verified in experiments.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.913-919
• /
• 2000

We give pressure stimulation into long chain fatty acid of LB thin films then manufacture a device under the accumulation condition that the state surface pressure is 20[mN/m]. In processing of a device manufacture, we can see the process is good from the change of a surface pressure for organic thin films and transfer ratio of area per molecule. The structure of manufactured device is Au/Arachidic acid/Al, the number of accumulated layers are 13, 17 and 19. The I-V characteristic of the device is measured from 0[V] to +1.5[V]. We have investigated the capacitance because this fatty acid system have a accumulated layers. The maximum value of measured current is increased as the number of accumulated layers are decreased. The capacitor properties of a thin film is better as the distance between electrodes is smaller. The results have shown the insulating materials and could control the conductivity by accumulated layers.

• Macromolecular Research
• /
• v.17 no.6
• /
• pp.411-416
• /
• 2009

The color stabilization of antimicrobial blends was studied by using poly(hexamethylene guanidine) phosphate (PHMG) as a highly efficient biocidal and nontoxic agent. The Taguchi method was used to determine the optimum conditions for the blending of PHMG in polypropylene (PP) matrix. To improve the yellowing phenomena, two kinds of stabilizer were used together: tetrakis[methylene(3,5-di-t-butyl-4-hydroxyhydrocinnamate)](IN1010) from phenol and tris(2,4-di-t-butylphenylphosphite) (IF168) from phosphorus. According to blend composition and mixing condition, six factors were chosen, with five levels being set for each factor. The orthogonal array was selected as the most suitable for fabricating the experimental design, L25, with 6 columns and 25 variations. The-smaller-the-better was used as an optimization criterion. The optimum conditions for these parameters were 10 phr for PHMG, 2 phr for IN1010, 1 phr for IF168, 10 min for mixing time, $210^{\circ}C$ for mixing temperature, and 30 rpm for rotation speed. Under these conditions, the yellowness index of the blend was 1.52. The processibility of the blends was investigated by Advanced Rheometric Expansion System (ARES). The blend with 0.5 w% PHMG content, diluted with PP, exhibited an antimicrobial characteristic in the shake flask method.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.8
• /
• pp.1394-1400
• /
• 2010

This paper introduces a newly improved Ultra-FRFET that has much better reverse recovery characteristic than that of the typical MOSFET and presents its effectiveness in the HV-BLU system of LCD TVs. The reverse recovery time, $T_{rr}$ of Ultra-FRFET is shorter than 40nsec and the peak value of reverse current, $i_{rr}$ is also much smaller compared to the typical MOSFET's, which are sufficient to prevent the MOSFET’s failures without additional FRDs and diodes in HV-BLU system with a half-bridge resonant inverter topology worked by PWM method. In order to verify the validity, the loss analysis and the implementation results in cases when both the conventional solution using typical MOSFETs with additional FRDs and a new solution using Ultra-FRFETs are applied to a HV-BLU of 40" LCD TV are presented. As a result, the effectiveness of Ultra-FRFET was verified and the results are presented in this paper.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1696-1698
• /
• 2000

We give pressure stimulation into long chain fatty acid of LB thin films then manufacture a device under the accumulation condition that the state surface pressure is 20[mN/m]. In processing of a device manufacture, we can see the process is good from the change of a surface pressure for organic thin films and transfer ratio of area per molecule. The structure of manufactured device is Au/Arachidic acid/Al, the number of accumulated layers are 13, 17 and 19. The I-V characteristic of the device is measured from 0[V] to +1.5[V] and the capacitor. The maximum value of measured current is increased as the number of accumulated layers are decreased. The capacitor properties of a thin film is better as the distance between electrodes is smaller.

• Journal of Industrial Technology
• /
• v.24 no.A
• /
• pp.37-46
• /
• 2004

A performance analysis for newly being considered electric rail car office has been made in this study. The major purpose is to examine a proposed design in terms of its capacity and the proposed number of travels (82-84) per day. For this study we first examined the overall system configuration with detailed operational processes of cleaning and inspection. We then developed a simulation model using ARENA and designed input data from 12 selected factors and their interaction effects. A simulation run for each treatment combination of $L_{16}(2^{15})$ orthogonal array was run and 20 batch means were obtained. Through careful analyses of the results obtained, we drew a diversity of suggestions including the best factor level combination. Our confirmation experiments at the optimal level combination further validate the possibility of 82 runs and the consistency in the results.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.5
• /
• pp.464-473
• /
• 2001

Since DCT algorithm divides an image into blocks uniformly in both the spatial domain and the frequency domain, it has a weak point that it can not reflect HVS(Human Visual System) efficiently To avoid this problem, we propose a new algorithm, which combines only the merits of DCT and wavelet transform. The proposed algorithm uses the high compaction efficiency of DCT, and applies wavelet transform mode to DCT coefficients, so that the algorithm can utilize interband and intraband correlations of wavelet simultaneously After that, the proposed algorithm quantizes each coefficient based on the characteristic of each coefficient's band. In terms of coding method, the quantized coefficients of important DCT coefficients have symmetrical distribution, the bigger that value Is, the smaller occurrence probability is. Using the characteristic, we propose a new still image coding algorithm of symmetric and bidirectional tree structure with simple algorithm and fast decoding time. Comparing the proposed method with JPEG, the proposed method yields better image quality both objectively and subjectively at the same bit rate.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.385-388
• /
• 2002

We measured and evaluated digital, pre-sampling and overall imaging properties (characteristic curves, Modulation Transfer Function (MTF), Wiener spectra (WS), Noise Equivalent Quanta (NEQ) and Detective Quantum Efficiency (DQE)) for the direct type and indirect type of Flat-Panel Detector (FPD). First, the digital and overall characteristic curves of the both types of FPD had more wide dynamic range than that of the S/F system. Second, the pre-sampling and overall MTF of the direct-type FPD were superior to those of the indirect-type FPD. Third, for identical exposures, the digital and overall WS of the direct-type FPD were similar or worse than those of the indirect-type FPD, and for larger exposure, the digital WS of the both types of FPD were smaller, but overall WS of the both types of FPD were larger. Fourth, the digital and overall NEQ and DQE of the direct-type FPD were worse than both NEQ and DQE of the indirect-type FPD at lower spatial frequencies, but were better at higher spatial frequencies.

• Journal of the Korean Vacuum Society
• /
• v.13 no.1
• /
• pp.9-13
• /
• 2004

Perylene is an interesting material known to have P-type and N-type characteristics at the same time. We prepared perylene thin-films in ultrahigh vacuum with two different deposition rates of 0.1 $\AA$/s and 1.0 $\AA$/s in order to study the dependence of film characteristics on the growth condition. The smaller average grain size with larger surface coverage as well as the better crystallinity were observed on the perylene film prepared under 1.0 $\AA$/s deposition rate in x-ray diffraction (XRD) and atomic force microscopy (AFM) study. For studying electrical property of the film, perylene organic thin-film transistor (OTFT) with gold contacts was fabricated on $SiO_2$/Si surface in UHV condition. The prepared perylene OTFT device shows P-type characteristic. The obtained hole mobility in the current-voltage characteristic curve was$2.23\times10^{-5}\textrm{cm}^2$/Vs.

• Journal of Korean Society for Quality Management
• /
• v.49 no.2
• /
• pp.145-159
• /
• 2021

Purpose: A statistical similarity evaluation to compare pharmacokinetics(PK) profile data between nonclinical and clinical experiments has become a significant issue on many drug development processes. This study proposes a new similarity index by considering important parameters, such as the area under the curve(AUC) and the time-series profile of various PK data. Methods: In this study, a new profile similarity index(PSI) by using the concept of a process capability index(Cp) is proposed in order to investigate the most similar animal PK profile compared to the target(i.e., Human PK profile). The proposed PSI can be calculated geometric and arithmetic means of all short term similarity indices at all time points on time-series both animal and human PK data. Designed simulation approaches are demonstrated for a verification purpose. Results: Two different simulation studies are conducted by considering three variances(i.e., small, medium, and large variances) as well as three different characteristic types(smaller the better, larger the better, nominal the best). By using the proposed PSI, the most similar animal PK profile compare to the target human PK profile can be obtained in the simulation studies. In addition, a case study represents differentiated results compare to existing simple statistical analysis methods(i.e., root mean squared error and quality loss). Conclusion: The proposed PSI can effectively estimate the level of similarity between animal, human PK profiles. By using these PSI results, we can reduce the number of animal experiments because we only focus on the significant animal representing a high PSI value.