• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.55-60
• /
• 2005

Plate that have cutout inner bottom and girder and floor etc. in hull construction absence is used much, and this is strength in case must be situated, but establish in region that high stress interacts sometimes fatally in region that there is no big problem usually by purpose of weight reduction, a person and change of freight, piping etc.. Because cutout's existence gnaws in this place, and, elastic buckling strength by load causes large effect in ultimate strength. Therefore, perforated plate elastic buckling strength and ultimate strength is one of important design criteria which must examine when decide structural elements size at early structure design step of ship. Therefore, and, reasonable elastic buckling strength about perforated plate need design ultimate strength. Calculated ultimated strength change several aspect ratioes and cutout's dimension, and thickness in this investigation. Used program applied ANSYS F.E.A code based on finite element method.

• Proceedings of KOSOMES biannual meeting
• /
• 2004.11a
• /
• pp.129-135
• /
• 2004

Plate has cutout inner bottom and girder and floor etc in hull construction absence is used much, and this is strength in case must be situated, but establish in region that high stress interacts sometimes fatally in region that there is no big problem usually by purpose of weight reduction, a person and change of freight, piping etc. Because cutout's existence gnaws in this place, and, elastic budding strength by load rouses large effect in ultimate strength. Therefore, perforated plate elastic budding strength and ultimate strength is one of important design criteria which must examine when decide structural elements size at early structure design step if ship. Therefore, and, reasonable elastic budding strength about perforated plate need design ultimate strength. Calculated ultimate strength change several aspect ratioes and cutout's dimension, and thickness in this investigation. Used program applied ANSYS F.E.M code based on finite element method

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.04a
• /
• pp.73-76
• /
• 2002

Biofilter performance to reduce C $H_4$ emissions from MSW landfills was tested under a variety of environmental and design conditions. The optimum soil moisture content for C $H_4$ oxidation in a loamy sand was 13% by weight. The addition of N $O_3$-N did not affect the C $H_4$ oxidation rate. Soil depths of 30cm and 60cm were equally efficient in C $H_4$ oxidation. When the C $H_4$ loading rate was decreased, the percentage of C $H_4$ oxidized increased. The maximum C $H_4$ oxidation rate was 27.2 mol $m^{-2}$ $d^{-1}$ under optimum conditions (loamy sand soil, 13% moisture content, 30cm soil depth, and an loading rate of 32.8 mol $m^{-2}$ $d^{-1}$). Based on the above results, the installation of a properly sized and managed biofilter above a landfill cover should be capable of achieving a major reduction in atmospheric methane emissions from MSW landfills built with RCRA covers.

• Journal of Biosystems Engineering
• /
• v.33 no.4
• /
• pp.253-259
• /
• 2008

In this paper an optimum design of a lab-scale biofilter for absorbing ammonia has been proposed and analyzed. This biofilter is using pine chaff and wood shaving as filter materials. It is assumed that the biofilter can be used as a storage tank of swine manure slurry or swine stall. To evaluate the biofilter performance, the ammonia, mainly offensive odor ingredient, was measured. Swine compost was mixed with filter materials in ratio of 1:1 on weight base. Each test continued for 20 days. The ammonia emissions were reduced by 97.9% and 98.3% in case of using biofilter filled with pine chaff and compost, and wood shaving and compost, respectively. The system was tested with and without adding compost. It was found that the biofilter with wood shaving and compost has an ammonia removal efficiency of 94.1%, while biofilter with wood shaving only has 85.3%. The biofilter with wood shaving and compost showed 8.8% higher removal efficiency than that of wood shaving only. By mixing the compost, the number of microorganism was found to be about 2.3 times more than that of wood shaving only. Therefore it can be concluded that adding compost has a positive effect on the formation of microorganism.

• Journal of Power Electronics
• /
• v.2 no.3
• /
• pp.181-188
• /
• 2002

The utility interfaced sinewave modulation Inverter for the solar photovoltaic power conditioner with a high frequency transformer is presented for residential applications. As compared with the conventional full-bridge hard switching slnewave PWM inverter with a high frequency link, the simplest single-ended edge-resonant soft switching sinewave inverter with a sinewave duty cycle pulse control scheme is implemented, resulting in size and weight reduction, low cost and high efficiency This paper presents a prototype system of the sinewave zero voltage soft switching sinewave inverter for solar power conditioner, along with its operating principle and unique features. In addition to these, this paper discusses a control implementation to deliver high quality output current. Major design of each component and the power loss analysis under actual power processing is also discussed and evaluated from an experimental point of view A newly developed utility-connected sinewave power conditioning circuit which achieves 92.5% efficiency under 4kW output is demonstrated.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.12
• /
• pp.608-616
• /
• 2006

Recently, a switched reluctance motor is widely used in various industries because it has many advantages such as a simple structure, robustness, less maintenance, high torque/weight ratio, and easy speed control over other types of motors. However, a switched reluctance motor inherently produces acoustic noise and vibration caused by torque ripple. Applications of these motors where silent operation is desirable have thus been limited. In this paper, a new stator pole face having a non-uniform air-gap and a pole shoe attached to the lateral face of the rotor pole are suggested in order to minimize torque ripple. The effects of each design parameter are validated using a time-stepping finite element method. The parameters are optimized by utilizing response surface method (RSM) combined with (1+1) evolution strategy. The result shows that the optimized shape gives higher average torque and drastically reduced torque ripple.

• Journal of Korean Physical Therapy Science
• /
• v.28 no.3
• /
• pp.76-87
• /
• 2021

Background: The purpose of this study was to evaluate the effects of power walking and square dancing on middle-aged women with hypertension. Design: Randomized controlled Trial. Methods: 30 middle-aged women with hypertension were selected and divided into two groups. 15 cases in the control group received routine treatment, and 15 cases in the intervention group received community vigorous walking and square dancing intervention on the basis of routine treatment. The intervention time was 40-60minutes/day, 5days/week, total 16 weeks. total cholesterol (TC), triglycerides (TG), high density lipoprotein cholesterol (HDL), low density lipoprotein cholesterol (LDL), angiotensin II (Ang II), Leptin, blood pressure, and heart rate were measured. Results: Body weight, body mass index (BMI), TC, TG, LOW-density lipoprotein, angiotensin II, leptin, systolic blood pressure and heart rate were significantly reduced after power walking and square dancing (p<0.05). After the experiment, TC and TG in the experimental group were lower than those in the control group (p<0.05), while HDL was higher (p<0.05). Conclusion: The results of this study suggest that power walking exercises and square dances are significant effects on lipid mechanism and heart rate.

• CELLMED
• /
• v.10 no.1
• /
• pp.8.1-8.7
• /
• 2020

Aim:'Itrifal-e-Sagheer', a compound Unani formulation has been indicated in disease conditions simulating dyslipidemia. The present study was done to substantiate the efficacy of 'Itrifal-e-Sagheer' in dyslipidemia on scientific parameters. Materials and methods: A randomized, single blind, controlled, clinical trial was carried out on 30 patients of dyslipidemia who were randomly allocated into test (n = 15) or control (n = 15) groups. The test drug, Itrifal-e-Sagheer and control drug, Abana® were given to respective group for 45 days along with lifestyle modification. Results: The test drug significantly alleviated the symptoms of subjective parameters (palpitation, breathlessness and weight gain) (p<0.05). There was statistically significant reduction in lipid profile of the patients in test group (p<0.05) than control drug treatment. Conclusion: The study evidenced that Itrifal-e-Sagheer is potentially effective and safe in the treatment of dyslipidemia. However, a multicentric study with robust study design is required to generalize the results.

• Journal of Ocean Engineering and Technology
• /
• v.29 no.6
• /
• pp.405-410
• /
• 2015

This paper reports the hull form development and resistance performance of a 5-ton-class catamaran-type coastal fishing boat. The weight estimation and preliminary design were basically extracted from existing coastal fishing vessels. In addition, the resistance performance was investigated using a model test in a high-speed circulating water channel and was analyzed in comparison to an existing catamaran fishing vessel. As a result, the modified hull achieved an approximately 30% reduction in resistance compared to the previous hull. The stability or boarding sensitivity of the modified hull form was more stable or comfortable than the original hull form based on a trim and sinkage comparison between the two boats.

• Horticultural Science & Technology
• /
• v.33 no.3
• /
• pp.340-348
• /
• 2015

Mowing turfgrasses, especially fast growing species like perennial ryegrass, is one of the most time and money consuming tasks of their management. Trinexapac-ethyl (TE) is a popular plant growth regulator used to reduce mowing requirements, improve stress tolerance, and enhance turf quality. This study was conducted to investigate the effect of TE rate and frequency of applications on growth response and traffic tolerance of perennial ryegrass. The experiment was a split-plot laid out in a randomized complete block (RCB) design with three replications. TE was applied to main plots at 0.00, 0.25, and $0.50kg\;a.i.\;ha^{-1}$. Application pattern included an initial application, followed by two sequential applications at 6-wk intervals. Traffic treatment was applied to subplots with a cleated roller. Results demonstrated that TE consistently reduced vertical shoot growth, clippings dry weight, with maximum growth reduction of 59% and 65%, for 0.25 and $0.50kg\;a.i.\;ha^{-1}$, respectively, occurring at 2 weeks after initial TE treatment (WAT). Traffic also dramatically reduced vertical shoot growth and clippings dry weight. Overall, quality of perennial ryegrass was enhanced by sequential TE applications, however, turf quality and surface coverage reduced greatly under traffic, regardless of TE treatment. Total chlorophyll, chlorophyll a and chlorophyll b and total carbohydrates (TC) contents were also positively influenced following sequential TE application. Our results indicated that TE reduces mowing frequency and enhances turf quality rather than influencing traffic resistance.