• Proceedings of KOSOMES biannual meeting
• /
• 2018.06a
• /
• pp.193-193
• /
• 2018

현재 우리나라는 레저선박 및 중소형 선박, 연안소형어선에 대부분 사용되는 재질은 강도가 높고 내양품성이 우수한 FRP를 사용하고 있다. 하지만 FRP선박의 폐선 시 환경문제와 자원재활용, 선체중량에 연비 및 대기오염등에 의해 소형선박 중심으로 알루미늄선 전환이 이루어지고 있다. 본 연구에서는 알루미늄 선체가 적용된 멀티하우스보트에 알루미늄선 구조기준에 따른 슬래밍하중을 적용하여 구조 강도평가를 실시하였으며, 그 결과를 통해 각 부재별 민감도 평가를 수행하여 알루미늄 구조강도기준을 만족함과 동시에 중량 저감을 하여 실제 선박설계에 적용시키고자 한다.

• Textile Coloration and Finishing
• /
• v.17 no.5 s.84
• /
• pp.37-44
• /
• 2005

The electrolytic water(EW) has been used in agriculture, medical, semiconductor, and household fields. However there has been no use of EW in the textile process so far, because the application in the textile industry has been needed a large amount of EW in real process conditions. Recently, we have got electrolytic oxidation water(EOW) and electrolytic reduction water(ERW) by development of a electricity electron technology. And, the productivity of EW manufacture apparatus is arrived to large capacity. As a result, the application of EW could be possible in the textile industry. In this study, to confirm the possibility of application of EW, we scoured and hydrolyzed PET fabric using the EW. It was possible that the application of ERW for the scouring and hydrolysis of PET fabrics in the textile process.

• Smart Media Journal
• /
• v.3 no.1
• /
• pp.39-45
• /
• 2014

The partial product matrix of a parallel squarer are symmetric about the diagonal. To reduce the number of partial product bits and the depth of partial product matrix, it can be typically folded, shifted and bit-rearranged. In this paper, an efficient design approach for the combined squarer, capable of operating on either unsigned or signed numbers based on a mode selection signal, is presented. By simulations, it is shown that the proposed combined squarers lead to up to 18% reduction in area, 11% reduction in propagation delay and 9% reduction in power consumption compared with the previous combined squarers.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.384-387
• /
• 2006

Recently, the method of the apartment building design has been changed from wall type structures to moment structures. With like this reason, dry walls we used plentifully. Especially, the gypsum board was used from previously plentifully however the weak point of it is difficult to maintain because it weak strength. For the improvement of gypsum board, light weight concrete panel using cement board is used recently. As this study is the research of the series t on the development of non-bearing light weight concrete panel using bottom ash, the purpose of this study is to obtain basic data for application in the field. The results are that the structure 1 satisfies domestic standard concerned with sound insulation between households at the laboratory and field test.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.1379-1382
• /
• 2006

Recently, the method of the apartment building design has been changed from wall type structures to moment structures. With like this reason dry walls are used plentifully. Especially, the gypsum board was used from previously plentifully however the weak point of it is difficult to maintain because it weak strength. For the improvement of gypsum board, light weight concrete panel using cement board is used recently. As this study is the research of the series t on the development of non-hearing light weight concrete Panel using bottom ash, the Purpose of this study is to obtain basic data for application in the field. The results are that the structure 1 satisfies domestic standard concerned with sound insulation between households at the laboratory and field test.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.8
• /
• pp.86-92
• /
• 2021

As interest and demand for high value-added industries, including the global automobile and aerospace industries, have increased recently, demand for line centers with excellent performance that can respond to the production system for producing high value-added products is also rapidly increasing. A line center improves productivity based on the installed area using a multi-spindle compared to a conventional machining center. However, as the number of spindles increases, the weight increases and results in structural problems owing to the heat and vibration generated by each spindle. Therefore, it is necessary to improve machining precision through the structural improvement of the line center. This study presents research on the stabilization design of the line center through structural stability analysis through structural analysis to develop a compact multi-axis line center. An optimization model of the line center has been proposed to improve the processing precision and increase the rigidity by performing weight reduction based on the structural analysis results.

• Steel and Composite Structures
• /
• v.44 no.5
• /
• pp.603-617
• /
• 2022

Structural design, in general, is developed through trial and error technique which is guided by standards criteria and based on the intuition and experience of the engineer, a context that leads to structural over-dimensioning, with uneconomic solutions. Aiming to find the optimal design, structural optimization methods have been developed to find a balance between cost, structural safety, and material performance. These methods have become a great opportunity in the steel structural engineering domain since they have as their main purpose is weight minimization, a factor directly correlated to the real cost of the structure. Assuming an objective function of minimum weight with stress and displacement constraints provided by Brazilian standards, the present research proposes the sizing optimization and combined approach of sizing and shape optimization, through a software developed to implement the Simulated Annealing metaheuristic algorithm. Therefore, two steel plane frame layouts, each admitting four typical truss geometries, were proposed in order to expose the difference between the optimal solutions. The assessment of the optimal solutions indicates a notable weight reduction, especially in sizing and shape optimization combination, in which the quantity of design variables is increased along with the search space, improving the efficiency of the optimal solutions achieved.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.2 s.119
• /
• pp.149-154
• /
• 2007

Recently, the method of the apartment building design is changing from wall type to moment structure. Dry walls are used plentifully. Until now, the gypsum board is used mainly but it has many problems. For improving the problems, the light weight concrete panel using cement board is used recently. The purpose of this study is to obtain basic data for the light weight concrete panel using bottom ash. As a result, some structures satisfies domestic standard concerned with sound insulation between households at the laboratory and field test.

• Design & Manufacturing
• /
• v.17 no.2
• /
• pp.47-54
• /
• 2023

The research direction of the automobile industry worldwide is speeding up research to improve fuel efficiency through weight reduction as the weight of automobiles increases due to environmental problems, convenience demands, and safety problems. As a way to solve weight reduction, there is a method of improving mechanical properties by improving the development and manufacturing method of lightweight materials with replaceable mechanical properties. Therefore, research on the molding and processing technology of aluminum, which is a lightweight material, is being actively conducted. In this study, aluminum material was applied. By using Autoform S/W, a press forming analysis program, the blank holding force, mold die R, and bead restraint force were selected in three levels, respectively, and the results and optimization of formability and shape freezing were carried out. In this study, aluminum material was applied. By using Autoform S/W, a press molding analysis program, the blank holding force, mold die R, and bead restraint force were selected in three levels, respectively, and the results and optimization of formability and shape freezing were carried out. The optimized results were confirmed by comparative analysis of formability and Spring Back. As a result of the experiment, it was possible to confirm the result value of the Spring Back of the final product according to the tensile change of the material.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.2
• /
• pp.177-185
• /
• 2015

This paper describes a weight-reduction design method for the car bodies of a double deck high-speed train (service speed of 300 km/h). The method uses lightweight materials and a topology optimization technique. In this study, aluminum extrusions and sandwich composites were selected as the best materials to reduce the weight of the car body. The topology optimization technique was used to determine which car body parts could be made of the sandwich composites to achieve additional weight savings. The results of the topology optimization analysis showed that sandwich composites could be used for secondary car body members such as the roof and the second underframe. Also, it was found that a car body composed of aluminum extruded parts and sandwich composites could weigh up to 14% less than a car body made of only aluminum extrusions.