• 제목/요약/키워드: The way of coping

검색결과 224건 처리시간 0.023초

심리학적 관점에서의 남북한 문화이질성: 북한이탈주민의 심리적 적응을 중심으로 (North Korea-South Korea cultural heterogeneity in psychological perspective: Focusing on the North Korean defectors' adaptation)

  • 채정민;이종한
    • 한국심리학회지 : 문화 및 사회문제
    • /
    • 제10권2호
    • /
    • pp.79-101
    • /
    • 2004
  • 본 연구는 남북한 통일 논의에서 중요하게 다루어지는 남북한 문화이질성 논란을 심리학적으로 파악하기 위해 북한이탈주민들 181명을 대상으로 설문지법을 적용하여 실시되었다. 여기에서 북한이탈주민들은 정착 초기에 문화이질감을 상당히 많이 지각하는 것으로 드러났는데, 이 자체가 곧바로 문제는 아니며, 이에 대한 대처의 전략으로서 남한 문화지향성을 얼마나 구사하느냐가가 더 중요하다는 점이 밝혀졌다. 즉, 남한 문화지향성을 중심으로 적절하게 대처하면 자기효능감을 높게 가질 수 있었으며, 이에 따라 심리적 적응 수준도 높았다. 그런데, 이 심리적 적응 수준은 생활만족도와 같은 긍정적 지표에서는 유의미한 차이가 발견되지 않았으나, 우울감과 같은 부정적 지표에서는 유의미한 차이가 발견되었다. 여기서 자기효능감이 낮은 집단이 우울감이 높았고, 우울증상군으로 분류할 수 있는 경우가 해당 집단의 43% 수준에 이르는 정도로 많았다. 따라서 본 연구를 통해 북한이탈주민들의 남북한 문화이질감 극복을 위해 남한문화 적응 지향성을 많이 가지는 것이 중요하다는 점을 확인할 수 있었고, 이질감 그 자체만을 문제시하는 것보다는 이에 대해 대처하는 전략이 중요함을 알 수 있었다.

  • PDF

중년 남성의 죽음에 대한 태도에 영향을 미치는 요인 (Factors Influencing Middle-Aged Men's Attitude towards Death)

  • 정영미
    • Journal of Hospice and Palliative Care
    • /
    • 제16권3호
    • /
    • pp.166-174
    • /
    • 2013
  • 목적: 본 연구는 우리나라 중년 남성의 죽음에 대한 태도를 살펴보고 이에 대한 영향요인을 파악하여 올바른 자아성찰이 포함된 건강증진 프로그램 개발을 위해 시도되었다. 방법: 대구광역시에 거주하는 만 40~59세 중년 남성을 편의 표출하였다. 구조화된 설문지 문항에는 일반적 특성, 생활스트레스, 자아존중감, 생활만족도, 우울, 대처행동, 죽음에 대한 태도 등을 포함시켰다. 자료는 기술통계, 피어슨 상관계수 및 단계적 다중회귀 분석을 이용하였다. 결과: 중년 남성의 죽음에 대한 태도는 교육 정도, 종교, 자원봉사활동, 인지된 건강상태에 따라 유의한 차이가 있었으며, 죽음에 대한 태도는 생활스트레스, 우울과는 음의 상관관계를, 자아존중감, 생활만족도, 대처행동과는 양의 상관관계를 나타내었다. 또한 단계적 다중회귀분석을 통한 죽음에 대한 태도 영향요인은 생활만족도, 생활스트레스, 종교, 대처행동이 유의한 영향요인으로 나타났으며, 이들 변수의 죽음에 대한 태도 설명력은 25.7%였다. 결론: 중년 남성이 죽음을 올바로 이해하고 긍정적이면서 수용적인 태도를 지니기 위해서는 대상자가 가지고 있는 교육수준이나 경제수준과 같이 당장 변경이 어려운 요인보다는 보다 접근이 용이한 심리적인 요인에 초점을 두고 개입이 시행되어야 할 것이다. 또한 이런 중재는 일반 중년 남성뿐만 아니라 말기 암이나 호스피스 치료를 받고 있는 중년 남성, 더 나아가 중년 여성이나 다른 연령층에게 본 연구결과가 적용될 수 있을 것이다.

병원종사자의 직업성 스트레스에 관한 연구 - 서울시내 500병상 이상 병원종사자를 중심으로 - (Occupational Stress of Hospital Workers)

  • 이우천
    • 한국병원경영학회지
    • /
    • 제3권1호
    • /
    • pp.1-33
    • /
    • 1998
  • The purpose of this thesis is to study theoretical access to the methods that have been used for the research of occupational stress, thereby providing management methods of occupational stress of hospital workers. With a stress model of hospital workers set up from the viewpoint of organization management, 929 sets of questionnaires were collected from intern doctors, resident doctors, nurses, nursing aides, pharmacists, medical technicians, workers in patient affairs(reception and medical insurance workers), administrators and clerks from the 8 hospitals in Seoul with more than 500 beds. Upon variance analysis, correlation analysis and regression analysis of the collected questionnaires, this work examined how differences in stress caused by specific occupations and formulated a method of stress management for the hospital workers. The results are as follows. 1) If some duties of the nurses suffering from role-overloaded stress are transferred to the nursing aides dissatisfied with insufficient role, the two grunting groups can be satisfied at the same time. It is also necessary to transfer some jobs of the overloaded workers in patient affairs to the administrators, or the other way around. To reduce stress of conflict and ambiguity of role caused by the obscure division of roles between the workers, the role of each occupation should be delineated and the clear division of roles should be translated into action strictly according to that delineated. 2) Stress of inefficiency of organization from which the student doctors suffer can be relieved by management of participation. If they have access to the process of decision-making in general hospital affairs and consequently their understanding and the autonomy of job performance are promoted, such stress will be reduced. 3) To cope with stress of career development from which nurses, medical technicians, administrators, workers in patient affairs suffer, it is necessary to establish whether they have a chance to revive their careers, whether there are any ways of remotivation for less contributive workers, and whether they encourage each other to develope their careers. If they are given a chance to develope their careers, such stress will be relieved. 4) Pharmacists, suffering from stresses of living and personal relations, have strong cohesive power among themselves and organize a well-integrated team; thereby reducing the stress of personal relations and increasing productivity. 5) For administrators and student doctors confined to lesser social supports and for nurses and workers in patient affairs whose recognition of stress and job satisfaction are affected by social supports, emotional and informational supports for job performance help alleviate an individual's mental, and physical stress. 6) In addition to the above-mentioned stress-management methods, if an organizational coping strategy is provided according to the types of stress from the general viewpoint of the whole group of hospital workers, it would be of great help to managing stress. For example, the redesign of jobs, the management of objective, the improvement of working environment, the formation of an autonomous working group and various working plans can be set up for those who suffer from stress related to inappropriate role, while career counseling and development of career process can be provided for those dissatisfied with career development. Participation in the process of decision-making and the restructuring of the organization are needed for those who suffer from stress of malfunctioning organization, whereas creation of a supportive organizational atmosphere is desired for those who feel stressed due to personal relations. As well, such organizational coping strategies. as the increase of welfare facilities, seminars and educational programs and provision of health-promotion facilities can be provided.

  • PDF

지대치삭제의정확도가레이져신터링기술로제작된Co-Cr 코핑의변연적합도에미치는영향 (Influence of the accuracy of abutment tooth preparation on the marginal adaptation of Co-Cr alloy copings fabricated with a selective laser sintering technology)

  • 김서랑;곽재영;허성주;김성균;김명주
    • 대한치과보철학회지
    • /
    • 제53권4호
    • /
    • pp.337-344
    • /
    • 2015
  • 목적: 본 연구의 목적은 지대치 삭제의 정확도와 metal coping의 변연적합도와의 상관관계를 알아보는 데 있다. 이를 통해, 세 가지 다른 제작 방식 (주조, milling, 기법)이 이 상관관계에 미치는 영향을 비교해 보고자 한다. 재료 및 방법: 두 개의 master medel을 서로 다른 방식으로 제작하였다; 첫 번째 모델은 치과의사에 의해 deep chamfer margin을 가지도록 지대치 삭제된 것이고, 두 번째 모델은 3-D designing software program을 이용하여 동일한 삭제원칙에 따라 제작되었다. 각각의 모델에 대하여 세 가지 제작 방식으로 코발트-크롬 코핑을 12개씩 제작하여, 총 72개의 시편을 얻었다. 각 시편을 master model상에 적합시키고 공초점 레이저 주사 현미경으로 변연적합도를 측정하였다. 결과: SLS system (P=.0231)과 주조방식(P<.0001)에서는 computer designed model이 hand prepared model에 비하여 유의하게 우수한 변연적합도를 보였다. 그러나 milling group에서는 두 모델 간에 유의한 차이를 나타내지 않았다(P=.9962). 결론: 본 연구에 한하여, 지대치 삭제의 정확도가 금속 코핑의 변연적합도에 미치는 영향은 그 제작 방식에 따라 달랐다. 제작 방식에 따른 변연적 합도는 SLS system이 가장 우수하였고 지대치 삭제의 정확도에 의해 영향을 받았다. 한편, milling 방식은 세 가지 방식 중 가장 큰 변연 격차를 나타내었으며 지대치 삭제의 정확도에 영향을 받지 않았다.

현대 의자 디자인의 특성에 관한 연구 (A Study on the Characteristics of the Modern Chair Design)

  • 신홍경
    • 한국실내디자인학회논문집
    • /
    • 제13호
    • /
    • pp.187-196
    • /
    • 1997
  • A Study on the Characteristics of the Modern Chair Design The features of the modern chair design results from the diverse life style unfolded as per the 20th century social structure and the change of the residential space, and new design has been being developed by the scientists and the artists in various fields through their cooperated work in a way. The field of the scientific or technical study and creation of arts can be developed where they can evoke the sympathy in the circumstances under which the various styles of both arts and science meet across, complement crash together, and grow up. The operation which can control in the network of such pluralistic sphere has been needed for a long period and it has been facing the needs from a time and society. The engineering furniture as the counterplan of the above has brought the value of materials into relief to the forms of human life by making the properties of matter the maximum value or changing it. It can be summarized as following characteristics in its materials and forms along as well as the 3 types (handycrafty, mechanical, and ecological expression) in process through the 20th century. 1. Characteristics in Materials elasticity of the chair as per the changes of the flexibility in the steel pipe development of systematic chair using the plasticity of the plywood, plastic, and wire lightweight due to the materials such as aluminum. 2. Formative characteristics formative simplicity for the increase of the function and the quality improvement such as sociality, productivity, environmental and aesthetic nature emphasis on the structure as per the architectural environment and tecniques pursuit of the forms as a container of the human body seeking for the formative values as the cultural symbols coping with the needs from thepluralistic social structure Furniture is not the makeup for convenience sake but most importantexpression as necessaries of our environments. It should identify itself always as per these kind of needs and also it should be able to used to keep the relation of such mutual division, otherwise the purchase of new furniture should be necessary according to every change of the existing situatiov. Our residence doesn't need the specific style but expresses only the properties of the dwellers.

  • PDF

The effect of 5 different personalities on job stress in physical therapists

  • Kim, Eun Hyeong;Jang, Ho Young;Lee, Suk Min
    • Physical Therapy Rehabilitation Science
    • /
    • 제7권4호
    • /
    • pp.191-196
    • /
    • 2018
  • Objective: The purpose of this study was to investigate the effects of 5 different personalities on job stress in physical therapists. Design: Descriptive cross-sectional study. Methods: Structured self-report questionnaires consisted of demographic items, 5 types of personalities, and occupational stress. A questionnaire was distributed to 420 physical therapists working in Seoul and Incheon who had voluntarily agreed to participate in the study after the purpose of the study was explained. Of the 420 questionnaires, 405 questionnaires were collected and showed a recovery rate of 96.4%, of which 28 cases were excluded, leaving a total of 377 questionnaires being used for analyses. Pearson correlation analysis was performed to investigate the correlation of job stress and five personalities types. In addition, multiple regression analysis was performed to investigate the effect of general and occupational characteristics of physical therapist on job stress and the effect of personality type on occupational stress. All statistical significance levels were set at p<0.05. Results: The highest number of subjects, which were the physical therapists, showed the tendency to have a sincere personality, followed by affinity, openness, extroversion, and neuroticism. Physical therapists reported to be the most stressed in the order of professional role conflict, overload of work, work relation with a physician and supervisor, interpersonal relationship with patient and caregiver. The higher the level of affinity and sincerity, the lower the amount of stress received by the therapist from the interpersonal relationships between the patient and caregivers. On the other hand, the greater the level of openness and sincerity, the lower the stress levels related to professional role conflict. Conclusions: This study showed that the personality type and job stress of physiotherapists had a statistically significant effect. It is very important for physiotherapists to find their own way of coping with stress, which is satisfactory and appropriate for their job, because it is related not only to individual problems but also to the quality of patient care and medical services. Therefore, it is necessary to continue conducting research on how to relieve the stress levels of physical therapists according to their personality characteristics.

CAD/CAM으로 제작된 지르코니아 코어의 지대치 형태에 따른 변연 및 내면 적합도에 관한 연구 (Marginal and internal fit according to the shape of the abutment of a zirconia core manufactured by computer-aided design/computer-aided manufacturing)

  • 김지수;류재경
    • 대한치위생과학회지
    • /
    • 제5권1호
    • /
    • pp.13-19
    • /
    • 2022
  • Background: In this study, zirconia copings were fabricated by setting clinically acceptable inner values for prostheses using computer-aided design/computer-aided manufacturing (CAD/CAM). The processed copings were evaluated for the marginal and internal fit of each abutment shape with a CAD program using the silicone replica technique. Methods A total of 20 copings was produced by selecting models commonly used in clinical practice. After injecting the sample, the minimum thickness, internal adhesion interval, and distance to the margin line were set to 0.5, 0.05, and 1.00 mm using a dental CAD program, respectively. It was measured using a 2D section function in a three-way program of the silicon replication technology. Although the positions and number of measurements of the anterior and posterior regions differed, nine parts of each pre-tube were designated and measured by referring to a previous study to compare the two samples. Results As a result, the average margin of the mesial, distal, and buccal (labial) surfaces was 59.90 ㎛ in the anterior region and 60.40 ㎛ in the posterior region. The mean axial wall margin was 67.25 ㎛ in the anterior region and 69.25 ㎛ in the posterior region. In occlusion, the anterior teeth (77.70 ㎛), posterior teeth (77.60 ㎛), and both anterior and posterior regions were within the clinically acceptable range. Conclusion The edge and inner fit of zirconia coping manufactured using the CAD/CAM system showed clinically applicable results. To reduce errors and increase accuracy, materials and machine errors that affect the manufacture of prosthetics should be investigated. Based on our results, the completeness of prosthetics could increase if the inner value and characteristics of the material are adjusted when applied in clinical practice.

중소병원의 의료서비스 품질, 지각된 위험, 평판, 고객만족의 구조적 관계 연구 (A Study on the Structural Relationship between Quality of Medical Service, Perceived Risk, Reputation and Customer Satisfaction in Small and Medium Hospitals)

  • 박애준
    • 산경연구논집
    • /
    • 제10권4호
    • /
    • pp.67-76
    • /
    • 2019
  • Purpose - This study attempted to construct and validate a structural model of the relationship between the quality of medical services, perceived risk, reputation and customer satisfaction, which is the main concept of the relationship between large hospitals as well as small and medium hospitals and medical consumers. Through this verification, the small and medium hospitals are to find the way for wise coping in competitive situation with large hospitals. Research design, data, and methodology - This research developed a hypothesis by constructing a structural equation that reaches the satisfaction and the relationship between reputation of perceived risk and perceived risk of service quality perceptions of customers of small and medium hospitals. Research data were collected through a questionnaire survey of respondents who had medical service experience from small and medium hospital. A total data of 252 respondents were used as the sample for the final analysis and analyzed using SPSS 23.0 and AMOS 23. Results - As a result, the relationship of quality of medical service, reputation, and customer satisfaction among small and medium hospitals was consistent with the results of precedent studies, and the perceived risk has a significant impact on reputation, so the greater the perceived risk, the higher the preference for reputable medical institutions as large hospitals. In addition, it was found that the direct route from perceived risk to customer satisfaction was not significant, and reputation was found to have a full mediating effect on perceived risk and customer satisfaction. Customers who use small and medium hospitals prefer to use reputable medical institutions if their perceived risk is high, which is different from risk perception when specific targets are specified. Conclusions - In terms of the effect from customer satisfaction, not only the path of perceived risk → reputation → customer satisfaction, but also the quality of service quality → reputation → customer satisfaction. These findings suggest that small and medium hospitals are appropriately responding to competition with large hospitals, rather than focusing on the perceived risks and reputation of customers in establishing and utilizing competitive strategies to create new customers and preserve existing customers.

Comparison of prosthetic models produced by traditional and additive manufacturing methods

  • Park, Jin-Young;Kim, Hae-Young;Kim, Ji-Hwan;Kim, Jae-Hong;Kim, Woong-Chul
    • The Journal of Advanced Prosthodontics
    • /
    • 제7권4호
    • /
    • pp.294-302
    • /
    • 2015
  • PURPOSE. The purpose of this study was to verify the clinical-feasibility of additive manufacturing by comparing the accuracy of four different manufacturing methods for metal coping: the conventional lost wax technique (CLWT); subtractive methods with wax blank milling (WBM); and two additive methods, multi jet modeling (MJM), and micro-stereolithography (Micro-SLA). MATERIALS AND METHODS. Thirty study models were created using an acrylic model with the maxillary upper right canine, first premolar, and first molar teeth. Based on the scan files from a non-contact blue light scanner (Identica; Medit Co. Ltd., Seoul, Korea), thirty cores were produced using the WBM, MJM, and Micro-SLA methods, respectively, and another thirty frameworks were produced using the CLWT method. To measure the marginal and internal gap, the silicone replica method was adopted, and the silicone images obtained were evaluated using a digital microscope (KH-7700; Hirox, Tokyo, Japan) at 140X magnification. Analyses were performed using two-way analysis of variance (ANOVA) and Tukey post hoc test (${\alpha}=.05$). RESULTS. The mean marginal gaps and internal gaps showed significant differences according to tooth type (P<.001 and P<.001, respectively) and manufacturing method (P<.037 and P<.001, respectively). Micro-SLA did not show any significant difference from CLWT regarding mean marginal gap compared to the WBM and MJM methods. CONCLUSION. The mean values of gaps resulting from the four different manufacturing methods were within a clinically allowable range, and, thus, the clinical use of additive manufacturing methods is acceptable as an alternative to the traditional lost wax-technique and subtractive manufacturing.

Evaluation and comparison of the marginal adaptation of two different substructure materials

  • Karaman, Tahir;Ulku, Sabiha Zelal;Zengingul, Ali Ihsan;Guven, Sedat;Eratilla, Veysel;Sumer, Ebru
    • The Journal of Advanced Prosthodontics
    • /
    • 제7권3호
    • /
    • pp.257-263
    • /
    • 2015
  • PURPOSE. In this study, we aimed to evaluate the amount of marginal gap with two different substructure materials using identical margin preparations. MATERIALS AND METHODS. Twenty stainless steel models with a chamfer were prepared with a CNC device. Marginal gap measurements of the galvano copings on these stainless steel models and Co-Cr copings obtained by a laser-sintering method were made with a stereomicroscope device before and after the cementation process and surface properties were evaluated by scanning electron microscopy (SEM). A dependent t-test was used to compare the mean of the two groups for normally distributed data, and two-way variance analysis was used for more than two data sets. Pearson's correlation analysis was also performed to assess relationships between variables. RESULTS. According to the results obtained, the marginal gap in the galvano copings before cementation was measured as, on average, $24.47{\pm}5.82{\mu}m$ before and $35.11{\pm}6.52{\mu}m$ after cementation; in the laser-sintered Co-Cr structure, it was, on average, $60.45{\pm}8.87{\mu}m$ before and $69.33{\pm}9.03{\mu}m$ after cementation. A highly significant difference (P<.001) was found in marginal gap measurements of galvano copings and a significant difference (P<.05) was found in marginal gap measurements of the laser-sintered Co-Cr copings. According to the SEM examination, surface properties of laser sintered Co-Cr copings showed rougher structure than galvano copings. The galvano copings showed a very smooth surface. CONCLUSION. Marginal gaps values of both groups before and after cementation were within the clinically acceptable level. The smallest marginal gaps occurred with the use of galvano copings.