• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.14-17
• /
• 1999

The wrinkling behavior of a thin sheet with perfect geometry is a kind of compressive instability. The compressive instability is influenced by many factors such as stress state mechanical properties of the sheet material geometry of the body contact conditions and plastic anisotropy. The analysis of compressive instability in plastically deforming body is difficult considering all the factors because the effects of the factors are very complex and the instability behavior may show wide variation for small deviation of the factors. In this study the bifurcation theory is introduced for the finite element analysis of puckering initiation and growth of a thin sheet with perfect geometry. All the above mentioned analysis and the post-bifurcation behavior is analyzed by introducing the branching scheme proposed by Riks. The finite element formulation is based on the incremental deformation theory and elastic-plastic material modeling. in order to investigate the effect of plastic anisotropy on the compressive instability a square plate that is subjected to compression in one direction and tension in the other direction is analyzed by the above-mentionedfinite element analysis. The critical stress ratios above which the buckling does not take place are found for various plastic anisotropic modeling method and discussed. Finally the effect of plastic anisotropy on the puckering behavior in the spherical cup deep drawing process is investigated.

• Computers and Concrete
• /
• 제15권2호
• /
• pp.305-319
• /
• 2015

On mesoscopic level, concrete can be treated as a three-phase composite material consisting of mortar, aggregates and interfacial transition zone (ITZ) between mortar and aggregate. A lot of research has confirmed that ITZ plays a crucial role in the mechanical fracture process of concrete. The aim of the present study is to propose a numerical method on mesoscale to analyze the failure mechanism of reinforced concrete (RC) structures under mechanical loading, and then it will help precisely predict the damage or the cracking initiation and propagation of concrete. Concrete is meshed by means of the Rigid Body Spring Model (RBSM) concept, while the reinforcing steel bars are modeled as beam-type elements. Two kinds of RC members, i.e. subjected to uniaxial tension and beams under bending, the fracture process of concrete and the distribution of cracks, as well as the load-deflection relationships are investigated and compared with the available test results. It is found that the numerical results are in good agreement with the experimental observations, indicating that the model can successfully simulate the failure process of the RC members.

• 한국의류학회지
• /
• 제28권11호
• /
• pp.1415-1425
• /
• 2004

The purpose of this study was to analyze a theoretical frame of expressional area, the characteristics and the effects which is applied to fashion illustration by metonymic theory. The theoretical frame of expressional area was analyzed by category analysis and 150 fashion illustrations from 1900 to 1999 were analyzed by contents analysis. The results of this study were as follows: The expressions of metonymy were categorized by close-up, realistic expression, omission, borrowing of past style, simplification and deconstruction. First, close-up was presented as emphasis of small part of fashion by cutting the scenes, snapshot, emphasis, etc. Second, realistic expression was presented as description of related circumstance with fashion message through perspective and realistic description of circumstance related to figures. Third, omission was presented as seeking of essential core by removing color, pattern, texture or by omitting body and as emphasis of communication about dominant fashion message. Fourth, borrowing of past style was presented as reminding us of background of the past. Fifth, simplification was presented as using of form or color to alleviate tension of object and to restore the essential reality. Sixth, deconstruction was presented as fragmenting of image, flattening of body and clothing, weakness of form, and strength of color. In conclusion, metonymy made by experience system of thinking based on the reality, have extended expressional territory in pre-existing fashion illustration. And these ways not only will provide fashion image as illustrator's subjective intention and theoretical system of expression of message, but also will be useful way to strengthen communication for easier interpretation of fashion illustration.

• 한국응용과학기술학회지
• /
• 제37권3호
• /
• pp.496-508
• /
• 2020

This study reviews studies on the core stabilization of respiratory muscle training for the elderly health. Previous research data and presenting basic literature data suggest that respiratory activation is an important mechanism for core strengthening via exercise interventions for the elderly. The review found that first, the mechanism of improving the respiratory muscles weakened by aging to address the loss of core function due to old age sarcopenia among the elderly results entails promoting the autonomic nervous system by focusing on the respiratory muscle activation pattern, the core muscle sensation mobilized for body centering. Second, nerve roots, intraperitoneal pressure, and deep muscles in the trunk of the body can be promoted while controlling respiratory stimulation with cognitive feedback. Effortful inspiration increases the activation of respiratory assistive muscles and effortless exhalation can improve the core muscle mobilization by involving abdominal muscles. Third, through respiratory muscle training, the elderly can increase their awareness of spinal centering and improve the ability to control the deep core muscles that must be mobilized for core stabilization. In conclusion, respiratory muscle training to increase the utilization of the trunk muscles seems to be a useful core stabilization exercise for the elderly with chronic tension and joint degeneration.

• Journal of Mechanical Science and Technology
• /
• 제15권6호
• /
• pp.709-719
• /
• 2001

In particle or short-fiber reinforced composites, cracking of reinforcements is a significant damage mode because the cracked reinforcements lose carrying capacity. This paper deals with elastic stress distributions and load carrying capacity of intact and cracked ellipsoidal inhomogeneities. Three dimensional finite element analysis has been carried out on intact and cracked ellipsoidal inhomogeneities in an infinite body under uniaxial tension and pure shear. For the intact inhomogeneity, as well known as Eshelbys solution, the stress distribution is uniform in the inhomogeneity and nonuniform in the surrounding matrix. On the other hand, for the cracked inhomogeneity, the stress in the region near the crack surface is considerably released and the stress distribution becomes more complex. The average stress in the inhomogeneity represents its load carrying capacity, and the difference between the average stresses of the intact and cracked inhomogeneities indicates the loss of load carrying capacity due to cracking damage. The load carrying capacity of the cracked inhomogeneity is expressed in to cracking damage. The load carrying capacity of the cracked inhomogeneity is expressed in terms of the average stress of the intact inhomogeneity and some coefficients. It is found that a cracked inhomogeneity with high aspect ratio still maintains higher load carrying capacity.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.148-151
• /
• 2005

This paper is concerned with the thermo-mechanical behavior and temperature dependent strain rate sensitivity of steel sheet for an auto-body. In order to Identify the temperature dependent strain rate sensitivity of SPRC35R and SPRC45E, uniaxial tension tests are performed with the variation of the strain rates from 0.001/sec to 200/sec, and the variation of environmental temperatures from $-40^{\circ}C\;to\;200^{\circ}C$. The thermo-mechanical response at the quasi-static state is obtained with the static tensile test and at the intermediate strain rate is from the high speed tensile test. The experimental results show that the strain rate sensitivity increases at low temperature and it decreases at high temperature. It means that as the strain rate getting increasing, the variation of flow stress is more sensitive on the temperature. The results also indicates that the material properties of SPRC35R is more depend on the changes of strain rates and temperature than those of SPRC45E.

• 소성∙가공
• /
• 제15권2호
• /
• pp.132-137
• /
• 2006

This paper is concerned with the thermo-mechanical behavior including temperature dependent strain-rate sensitivity of steel sheet for an auto-body. In order to identify the temperature dependent strain-rate sensitivity of SPRC35R and SPRC45E, uniaxial tension tests are performed with the variation of the strain-rates from 0.001 /sec to 200 /sec at environmental temperatures varied from $-40^{\circ}C\;to\;200^{\circ}C$. The thermo-mechanical response at the quasi-static state is obtained with the static tensile test and at the intermediate strain-rate is from the high speed tensile test. Experimental results show that the strain-rate sensitivity increases at low temperature. It represents that as the strain-rate increases, the variation of flow stress becomes sensitive on the temperature. The results indicate that the flow stress of SPRC35R is more dependent on the changes of strain-rate and temperature than those of SPRC45E.

• 동의신경정신과학회지
• /
• 제18권1호
• /
• pp.111-122
• /
• 2007

Objective : Progressive muscle relaxation(PMR) therapy is the way of mind and body self-regulation which makes major muscles tension to be comfortable condition. It was considered to be important to check the level of relaxation in objective validity. Therefore, Heart rate variability(HRV) is the valuable measurement to investigate the effect of progressive muscle relaxation therapy on autonomic nerve system. Method : I studied 38 subjects. The subjects were measured HRV at first. And then, Using a CD player, the subjects listened to recorded PMR program for 15 minutes. After this progress, I rechecked HRV. Results : heart rate item of HRV was significantly decreased. Also, the numerical value of SDNN(standard deviation of all NN intervals) and SDSD(standard deviation of differences between adjacent NN intervals) items of HRV were showed significantly increased in all subjects after PMR. Conclusion : It indicated that PMR is efficient for inspiring resistance of the stress and a sense of stability, and PMR is a valuable method to reduce the mind stress and stiffness of body muscle.

• 한국해양공학회지
• /
• 제26권1호
• /
• pp.70-77
• /
• 2012

In this study, a numerical analysis of offshore installation using a floating crane with heave compensator is carried out in time domain. The motion analysis of crane vessels is based on floating body dynamics using convolution integral and the crane wire is treated as simple spring. The lifted structure is assumed as a rigid body with 3 degree-of-freedom translational motion. The heave compensator is numerically modelled by the generalized spring-damper system. Firstly, forced motion simulations of crane wire system are carried out to figure out the basic principle of heave compensator. The transfer function of crane wire system is obtained and effective wave period of heave compensator are found. Then, coupled analysis of crane vessel, crane wire, and lifted structure are performed in regular and irregular sea conditions. Two different crane vessels and two lifted structures (suction pile and manifold) are considered in this study. Through a series of numerical calculations, the effective zone of heave compensator is investigated with respect to wave period and crane wire length.

• 해양환경안전학회지
• /
• 제28권1호
• /
• pp.19-29
• /
• 2022

연안통발 어민에 대한 설문조사 결과, 통발 투하 및 인양 중 로프 걸림에 따른 전도사고가 42.1 %로 가장 높았고, 갑판에서 미끄러짐과 통발 권양장치의 신체 협착사고가 각각 21.1 %를 차지하였다. 또한 가장 위험한 작업은 전체 조사대상의 53.2 %가 통발 인양과정을 들었고, 어종선별 33.8 %, 통발 투하 9.1 % 순으로 응답하였다. 어민들은 통발 권양장치의 주요 개선 요구사항으로 응답자의 36.8 %와 31.6 %가 통발을 수중에서 작업갑판까지 수월하게 인양하는 방안과 통발 인양 시 로프 장력 극복과 슬립 방지 등 사고저감 방안을 언급하였다. 본 연구에서 소형 통발어선 권양장치는 구동롤러와 로프 간의 적정한 접촉각을 통해 로프의 접촉면적과 마찰계수를 증가시킴으로써 권양력을 높이는 것이다. 구동롤러와 로프 간의 접촉각이 1°, 5°, 9°, 14° 및 19°일 때 로프 장력은 각각의 접촉각에 따라 차이를 보였으며, 9°일 때 가장 높은 392.62 kgf까지 측정되었다. 이러한 실험결과를 반영하여 시제품 권양장치를 제작하고 총 길이가 100 m인 로프에 4 m 간격으로 총 25개의 통발을 해상에 설치한 후 인양에 따른 로프 장력을 측정하였다. 그 결과, 로프 장력은 통발 인양작업 초기에 급격히 증가하여 가장 높은 31.89 kgf로 측정되었으며, 이후에는 크게 낮아졌다. 따라서 소형 통발어선 권양장치의 권양력은 인양작업 초기에 부여되는 최대 로프 장력 값을 기준으로 설계하는 것이 타당하다.