• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.259-260
• /
• 2015

In this paper, for deriving core function requirements of facility maintenance using BIM(Building Information Modeling) customized surveys were conducted with 30 facility managers during 6 momths from July 2014. As a result, 19 core function requirements for efficient facility maintenance are drawn. The core of Building facility management function is that opinions of facilities maintenance managers should be fully reflected than that of BIM experts. In the future, the development of maintenance programs based on BIM should be made fully by reflecting the opinions of building facility managers on the basis of this questionnaire survey results.

• Journal of the Korea Safety Management & Science
• /
• v.9 no.3
• /
• pp.15-19
• /
• 2007

This paper proposes a maintenance method to integrate worker's safety concerns into the process activities of the manufacturing system and it is to be considered as a part of the scope of maintenance engineering. The proposed method incorporates worker's health and safety considerations into maintenance engineering in each of the manufacturing process using reliability analysis. It can help to make a better planning and implementation of maintenance activities for the manufacturing system.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05a
• /
• pp.587-591
• /
• 1997

The DGs (Diesel Generators) in NPP (Nuclear Power Plant) has been used for the emergency electric power source to shut down the nuclear reactor safely in case of station blackout. The RCM (Reliability Centered Maintenance) has been applied to DGs for increasing the safety of NPP. The structured defects of DG were not remedied by the improvement of maintenance method. As the first stage of RCM, to find the structured defects, its failure modes were searched and analyzed through the ten year maintenance information. The structured defects such as the air compressor, the lubricating oil pressure, and the insufficient load were the root causes of main failures. The air reservoir reinstallation, the lubricating oil tube modification, the load bank installation, and the qualitative instrumentation were the solutions for the hardware oriented RCM of DGs. There remains the software oriented RCM such as the rejection of useless maintenance, the preventive maintenance, the database of maintenance information, and the predictive maintenance.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.1
• /
• pp.9-18
• /
• 2021

Recently, the rapid proliferation, introduction, and application of the fourth industrial revolution technology has emerged as a trend in the construction market. Building Information Model (BIM) technology is a multidimensional information system that forms the basis of the fourth industrial revolution technology. The river sector utilizing this information-based system is also being actively reviewed, for example, the current measures for maintenance. In recent years, active research and current work should be done to reflect the need for river experts to introduce BIM into the river field. In addition, the development of tools and support software for establishing various information systems is essential for the activation of facility maintenance information systems reflecting advanced technology and to establish and operate management plans. A study on the maintenance of river facilities involves using existing drawings to build a three-dimensional (3D) information model, check the damage utilizing it, and inform it, and utilize it as the data for maintenance reinforcement. This study involved determining a method to build a river facility without the existing information system and using the property maintenance information with 3D modeling to provide a more effective and highly utilized management plan to check maintenance operations and manage damages.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.1
• /
• pp.183-188
• /
• 2011

Management of maintenance parts in the aircraft have difficulty because of high cost of part, necessity of separate managements, and very many kinds of parts. The serial number of parts was used in maintenance process and then the results was depended on worker's ability. Also the workers used printed work order and manual at every time in maintenance processes. In this study, we analyzed the maintenance process and the information that occurs in the material warehouse and hangar for large airline company to solve the problems about inventory and visualization. Based on above analysis we developed the maintenance process with integrated by information technologies such as QR code and tablet PC. We expect the reduced errors resulting from visually checking and decreased work hours and maintenance cost and will finally develop the smart work.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.3
• /
• pp.209-215
• /
• 2011

Currently, 10% of the domestic aircraft accidents and 9% of delays and cancellations were generated due to poor maintenance. Aircraft maintenance work is divided into works in material warehouse and in hangar. In material warehouse, the problem in aircraft maintenance work is occurred when the serial number of parts are identified and entered. In hangar, work order are duplicatively written. In addition, the maintenance information is not shared and then work order is wrong delivered. In this study, we analyzed the maintenance process and the informations that occurs in the material warehouse and hangar for large airline company to solve the problems. And serial numbers are replaced by QR code. And documented work order and manual are handled using the tablet PC. In conclusion, this paper studied smart work of maintenance process about tire parts. We expect to improve the inefficiency of identification of serial number and total maintenance time is reduced by real-time information sharing.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.32 no.2
• /
• pp.171-178
• /
• 2009

Logistic support activities for weapon systems play an important role at maintenance activities in modern warfares. These activities are essential for keeping weapon systems ready at all time. However, maintenance supplies can be delayed without a proper information system. Further, increases of mean time to repair (MTTR) and unavailability of weapon systems can be occurred. In this study, a web based information system is developed for logistic chains of class 9 supplies. Utilizing web database technologies, the developed system can provide an environment for data exchange and sharing among various participants in the supply chain.

• Journal of Construction Engineering and Project Management
• /
• v.4 no.3
• /
• pp.21-32
• /
• 2014

The practiced conventional methods for maintenance management in Malaysian Polytechnic faced many issues due to poor service delivery, inadequate finance, poor maintenance plan and maintenance backlogs. The purpose of this study is to improve the conventional method practices which tend to be ineffective in Malaysian Polytechnic. The case studies were conducted with eight Polytechnics and are selected based on conventional method practices and its major problems. There are around 32 Polytechnics in Malaysia and almost are using conventional methods. The number is considered very big indicating that the use of modern Information and Communication Technology (ICT) is still very limited compared to other institutions of higher learning in Malaysia. The overall findings of this research indicated; poor service delivery, inadequate financial, poor maintenance planning and maintenance backlogs. There is also need to overcome less man power competencies of maintenance management practices which existed with all eight Polytechnics. The proposed system is intended to be used for maintenance management practices at Malaysian Polytechnics in order to provide high-quality of building facility with safe and healthy environments.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.4
• /
• pp.469-474
• /
• 2014

Installed on telephone poles laid scrambling to monitor the status of the communication lines, and cost information can provid eadditional information tools to develop systems to support on-site monitoring. Aerial support for a maintenance monitoring module to apply an embedded system, and information processing applications manufactured. In this study, a comprehensive plan in accordance with the government's aerial maintenance work to prevent accidents spread support for the device to immediately take advantage of big cities and aerial maintenance business, Construction worker accused of bias and aims to improve efficiency of maintenance puts.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2020.01a
• /
• pp.273-274
• /
• 2020

본 논문에서는 부가가치가 높은 군용 장비류의 해외정비품을 국내정비로 전환하기 위한 절차 중 최종 성능평가 절차를 제안하였다. 기존의 절차는 해외정비품의 성능시험을 위한 정비능력 개발시 개발된 국산화 시험장비의 유효성 검증을 위한 명확한 절차가 마련되지 않아 소요군 혹은 실무자에 따라 최종성능평가의 기준이 다른 점이 발생하였다. 따라서 본 연구에서는 통일화된 절차를 연구하여 제안하였다. 제안한 이 절차는 통일된 기준 마련을 통해 해외도입 시험장비와 국산화된 시험장비의 상호 같음을 검증하여 해외로 나가는 정비대상품을 국내정비로 전환하였을 때 품질면에서 동일함을 보증하기위한 중요한 수단이 될 것이라 기대한다.