• Journal of Electrochemical Science and Technology
• /
• 제7권2호
• /
• pp.170-178
• /
• 2016

Composited molybdenum oxide and amorphous carbon (MoO₃/C) as anode material for lithium ion batteries has been successfully synthesized by calcining polyaniline (PANI) doped with ammonium heptamolybdate tetrahydrate (AMo). The as prepared electrode material was characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR) and field emission scanning electron microscopy (FE-SEM). The electrochemical performance of the anode was investigated by galvanostatic charge/discharge, cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). The MoO₃/C shows higher specific capacity, better cyclic performance and rate performance than pristine MoO₃ at room temperature. The electrochemical of MoO₃/C properties at various temperatures were also investigated. At elevated temperature, MoO₃/C exhibited higher specific capacity but suffered rapidly declines. While at low temperature, the electrochemical performance was mainly limited by the low kinetics of lithium ion diffusion and the high charge transfer resistance.

• 천문학회보
• /
• 제38권1호
• /
• pp.41.2-41.2
• /
• 2013

We present the statistical properties of a volume-limited sample of 7,429 nearby (z = 0.033-0.044) galaxies from the Sloan Digital Sky Survey Data Release 7. By performing a visual inspection, we classified our sample galaxies according to the Hubble sequence (Hubble 1926, 1936). Then we excluded apparently smaller and flatter galaxies from our database because morphology classification on them turned out to be difficult. Our results cover structural (e.g. concentration index, color, magnitude, stellar mass, etc.), spectroscopic (e.g. velocity dispersion, $H{\beta}$ absorption line, Fe absorption line, Mg absorption line, accretion rate, $H{\alpha}$ emission line, etc.), and environmental (e.g. density, etc.) properties of each morphology type based on morphology distribution. For this analysis, we used the recent re-measurements of spectral line strengths by Oh and collaborators (2011). Our statistics confirm the up-to-date understanding on galaxy populations, e.g., correlations between morphology and line strengths and in turn derived ages and so on.

• 한국항공우주학회지
• /
• 제50권11호
• /
• pp.801-807
• /
• 2022

본 논문에서는 초소형 S-대역 PCM/FM 텔레메트리 송신기를 제안한다. 크기의 소형화로 한정적인 공간에 적용이 가능하며 운용 환경 및 시스템마다 다르게 설정되는 규격에도 안정적인 데이터 송신이 가능한 장비를 설계 및 제작하였다. 장비의 소형화를 위하여 RF 직접변환 구조를 적용하였으며, 최소한의 소자로 송신기의 역할을 수행할 수 있도록 1장의 인쇄회로기판에 RF송신반, 전원분배반, 신호처리반을 구현하였다. 목표한 규격대로 성능의 저하 없이 S-대역(2,200~2,400MHz)에서 1~10W의 출력 가변이 가능하고 390kbps~12.5Mbps의 Data Rate 설정이 가능하도록 설계 및 제작을 진행하였다. 설계 검증을 위하여 장비를 제작한 후 RF 성능 시험 및 비트오류율 측정 시험을 진행하였다. 본 장비는 IRIG (Inter-Range Instrumentation Group) 표준이 제시하는 PCM/FM 변조 신호의 OBW(Occupied Bandwidth), null-to-null 대역폭, 1st IMD(Inter Modulation Distortion), Spurious Emission, Phase Noise 특성이 만족함을 확인하였으며, 송신기 점검 장비를 이용하여 본 장비가 전달받은 Data를 왜곡 없이 정상적으로 송신함을 확인하였다.

• 산학경영연구
• /
• 제19권2호
• /
• pp.69-94
• /
• 2006

매립된 패기물의 분해과정에서 생성되는 부산물로서의 매립가스는 악취와 환경오염을 유발하는 유해한 가스로 여겨져 왔다. 그러나 발열량이 $5,000kcal/m^3$에 달하는 매립가스의 특성은 에너지원으로써의 활용가치가 탁월한데다 지구온난화의 주범으로 떠오르면서 그 회수 필요성이 더욱 강조되고 있어, 재생에너지로서의 매립가스를 대체에너지 자원으로 이용하려는 추세는 매우 고무적인 현상이라 하겠다. 현재 우리나라의 매립가스자원화 사업은 가스엔진을 이용한 전력생산이 대부분을 차지하고 있으며, 부분적으로 중질가스와 고질가스의 활용에도 관심을 보이고 있다. 가스발전기의 가동률과 전력단가의 변동을 고려하여 매립가스의 경제성을 분석해본 결과, 초기 투자비 회수와 지속적인 수익성 확보를 위해서는 최소한 10년 이상의 발전사업 운영 및 전력판매 단가의 현실화가 요구되고 있다.

• 한국산학경영학회:학술대회논문집
• /
• 한국산학경영학회 2006년도 춘계학술발표대회 발표논문집
• /
• pp.147-170
• /
• 2006

재생에너지로서의 매립가스는 매립된 폐기물의 분해과정에서 생성되는 부산물로서 악취와 환경오염을 유발하는 유해한 가스로 여겨져 왔으나, 최근 들어 매립가스를 대체에너지 자원으로 이용하려는 추세가 나타나고 있음은 매우 고무적인 현상이라 하겠다. 발열량이 $5,000kcal/m^3$에 달하는 매립가스의 특성은 에너지원으로써의 활용가치가 탁월한데다 지구온난화의 주범으로 떠오르면서 그 회수 필요성이 더욱 강조되고 있는 실정이다. 현재 우리나라의 매립가스자원화 사업은 가스엔진을 이용한 전력생산이 대부분을 차지차고 있으며, 부분적으로 중질가스와 고질가스의 활용에도 관심을 보이고 있다. 가스발전기의 가동률과 전력단가의 변동을 고려하여 매립가스의 경제성을 분석해본 결과, 초기 투자비 회수와 지속적인 수익성 확보를 위해서는 최소한 10년 이상의 발전사업 운영 및 전력판매 단가의 현실화가 요구되고 있다.

• 천문학논총
• /
• 제27권4호
• /
• pp.281-284
• /
• 2012

We utilize AKARI's slitless spectroscopic capability to detect the $3.3{\mu}m$ polycyclic aromatic hydrocarbons (PAHs) emission and measure star formation (SF) activity for various AKARI programs. First, we obtain $2{\sim}5{\mu}m$ spectra of 20 flux-limited galaxies with mixed SED classes in order to calibrate the $3.3{\mu}m$ PAH luminosity ($L_{PAH3.3}$) as a star formation rate (SFR) indicator. We find that $L_{PAH3.3}$ correlates with $L_{IR}$ as well as with the $6.2{\mu}m$ PAH luminosity ($L_{PAH6.2}$). The correlations does not depend on SED classes. We find that ULIRGs deviate from the correlation between PAH luminosities and $L_{IR}$, while they do not for the correlation between PAH luminosities. We suggest possible effects to cause this deviation. On the other hand, how AGN activity is linked to SB activity is one of the most intriguing questions. While it is suggested that AGN luminosity of quasars correlates with starburst (SB) luminosity, it is still unclear how AGN activity is connected to SF activity based on host galaxy properties. We are measuring SFRs for the LQSONG sample consisting of reverberation mapped AGNs and PG-QSOs. This is an extension of the ASCSG program by which we investigated the connection between SB and AGN activities for Seyferts type 1s at z ~ 0.36. While we found no strong correlation between $L_{PAH3.3}$ and AGN luminosity for these Seyferts 1s, $L_{PAH3.3}$ measured from the central part of galaxies correlates with AGN luminosity, implying that SB and AGN activities are directly connected in the nuclear region.

• 상하수도학회지
• /
• 제30권4호
• /
• pp.401-408
• /
• 2016

Desalination is getting more attention as an alternative to solve a global water shortage problem in the future. Especially, a desalination technology is being expected as a new growth engine of Korea's overseas plant business besides one of the solutions of domestic water shortage problem. In the past, a thermal evaporation technology was a predominant method in desalination market, but more than 75% of the current market is hold by a membrane-based reverse osmosis technology because of its lower energy consumption rate for desalination. In the future, it is expected to have more energy efficient desalination process. Accordingly, various processes are being developed to further enhance the desalination energy efficiency. One of the promising technologies is a desalination process combined with Pressure Retarded Osmosis (PRO) process. The PRO technology is able to generate energy by using osmotic pressure of seawater or desalination brine. And the other benefits are that it has no emission of $CO_2$ and the limited impact of external environmental factors. However, it is not commercialized yet because a high-performance PRO membrane and module, and a PRO system optimization technology is not sufficiently developed. In this paper, the recent research direction and progress of the SWRO-PRO hybrid desalination was discussed regarding a PRO membrane and module, an energy recovery system, pre-treatment and system optimization technologies, and so on.

• 한국화재소방학회논문지
• /
• 제34권2호
• /
• pp.22-29
• /
• 2020

본 연구에서는 개발 중인 현장지휘관 훈련 콘텐츠에 적용될 화재상황의 현실성 및 전문성 확보를 위하여 선행연구에서 선정한 7개 화재유형별 중 주거목적시설의 대표 가연물 화재실험을 통해 화재양상 및 열방출량, 연기발생량을 분석하였다. 측정결과 최대 열방출량은 소파가 728.6 kW로 가장 높게 측정되었으며, 다음으로는 매트리스+전기장판, 책상+의자, TV, 매트리스 순으로 나타났다. 총열방출량의 경우 소파가 226.2 MJ, 총 연기발생량은 경우 매트리스+전기장판이 2,259.5 ㎡로 가장 많이 발생하였다. 본 연구에서는 가연물의 화재양상 및 특성에 주안점을 두고 시험수행을 하였다는 한계점이 있으며, 추후 다양한 데이터 확보와 FDS를 활용한 시뮬레이션 평가가 이루어져야 할 것으로 판단된다.

• 한국환경과학회지
• /
• 제18권6호
• /
• pp.655-665
• /
• 2009

This study aims to identify the impacts of air quality in the Korean Peninsula according to the China's environmental policies in preparation of the Beijing 2008 Olympic Games. The measurement of emission variations in China, aircraft measurement, and modelling were carried out. The reduction measures in Beijing, China and its emission changes resulted in $30{\sim}65%$ in decrease out of the total emissions within the Beijing region, whereas when it comes to the whole nation of China, the reduction rate was about $4{\sim}9%$. Comparing the concentration of the air pollutants in Seoul and Ganghwa in August 2008 during around the period of Beijing Olympic Games with one in $2004{\sim}2007$ showed that the $SO_2$ concentrations in the past was above 5ppb, while the concentration in the 2008 olympic period was 4ppb and below. The NOx at the Seokmori site in Ganghwa tended to be lower in concentration in 2008 than in between $2004{\sim}2007$. As for $O_3$ and $PM_{2.5}$, the concentration tended to be rather low since August 11. The air current track that showed during the period of aircraft measurement presented to be flowed into Korea through the Northeast part of China and the coast of Bohai Bay, while the concentrations of $SO_2$. NOx, and $O_3$ over the west sea on August 20 and 24 were 0.54 (0.28ppb), 0.86 (1.84ppb), and 54.0 (41.5ppb) respectively, similar or lower than the ones measured in the past in the similar current patterns. The modelling result showed similar patterns to the data of aircraft measurement, in particular in $SO_2$. Overall, the reduction measures in Beijing, China affected directly and indirectly the air quality in the Korean peninsular, but the impact was not significant as it was momentary and limited to the intended area.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.463-463
• /
• 2014

Dye-sensitized solar cells (DSSCs) have generated a strong interest in the development of solid-state devices owing to their low cost and simple preparation procedures. Effort has been devoted to the study of electrolytes that allow light-to-electrical power conversion for DSSC applications. Several attempts have been made to substitute the liquid electrolyte in the original solar cells by using (2,2',7,7'-tetrakis (N,N-di-p-methoxyphenylamine)-9-9'-spirobi-fluorene (spiro-OMeTAD) that act as hole conductor [1]. Although efficiencies above 3% have been reached by several groups, here the major challenging is limited photoelectrode thickness ($2{\mu}m$), which is very low due to electron diffusion length (Ln) for spiro-OMeTAD ($4.4{\mu}m$) [2]. In principle, the $TiO_2$ layer can be thicker than had been thought previously. This has important implications for the design of high-efficiency solid-state DSSCs. In the present study, we have fabricated 3-D Transparent Conducting Oxide (TCO) by growing tin-doped indium oxide (ITO) nanowire (NWs) arrays via a vapor transport method [3] and mesoporous $TiO_2$ nanoparticle (NP)-based photoelectrodes were prepared using doctor blade method. Finally optimized light-harvesting solid-state DSSCs is made using 3-D TCO where electron life time is controlled the recombination rate through fast charge collection and also ITO NWs length can be controlled in the range of over $2{\mu}m$ and has been characterized using field emission scanning electron microscopy (FE-SEM). Structural analyses by high-resolution transmission electron microscopy (HRTEM) and X-Ray diffraction (XRD) results reveal that the ITO NWs formed single crystal oriented [100] direction. Also to compare the charge collection properties of conventional NPs based solid-state DSSCs with ITO NWs based solid-state DSSCs, we have studied intensity modulated photovoltage spectroscopy (IMVS), intensity modulated photocurrent spectroscopy (IMPS) and transient open circuit voltages. As a result, above $4{\mu}m$ thick ITO NWs based photoelectrodes with Z907 dye shown the best performing device, exhibiting a short-circuit current density of 7.21 mA cm-2 under simulated solar emission of 100 mW cm-2 associated with an overall power conversion efficiency of 2.80 %. Finally, we achieved the efficiency of 7.5% by applying a CH3NH3PbI3 perovskite sensitizer.