• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1352-1354
• /
• 2004

The accurate analysis on railway traction power system should be carried out a load forecast preferentially. Commonly, it has been performed through Train Performance Simulator (TPS). In the study focused on velocity or location of train, however, the electric power consumption have been computed by converting mechanical power according to given velocity. Therefore, this paper presents a development of a mathematical model for electric load. The proposed load model is expressed as polynomial to reflect the influence of variance of train speed, that is, the model expresses the power as a function of train speed. in this study, method of the least squares method is used to find each coefficient and field test is performed to acquire data, electric power and speed of train in commercial running line.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.27 no.2
• /
• pp.162-167
• /
• 2017

The chevron rubber spring is used for subway vehicle as a primary suspension. Generally, the primary suspension has an influence to the running performance and not so much effect on the ride comfort in railway vehicle. But the stiffness of chevron spring is harder and harder as time goes on because of rubber characteristics. Therefore the dynamic characteristics such as ride comfort and derailment coefficient should be reviewed according to the stiffness variation of chevron rubber spring. In this paper the effect of chevron rubber spring on dynamic characteristics was studied by considering multi-body dynamics of railway vehicle on one straight line and seven curved lines.

• Tribology and Lubricants
• /
• v.29 no.2
• /
• pp.98-104
• /
• 2013

Cu-matrix-sintered brake pads and heat-resistant low-alloy steel are commonly applied to basic brake systems in high-energy moving machines. We analyzed how the tribological characteristics are influenced by the inertial mass. A high inertial mass decreased the friction coefficient by about 15% compared to a low inertial mass under all velocity conditions. The wear rates of the friction materials increased with the inertial mass. Thus, the inertial mass influences the friction coefficient and wear rate of the friction materials and disk but not the friction stability.

• Proceedings of the KSR Conference
• /
• 2003.05a
• /
• pp.133-138
• /
• 2003

The Korean high speed railway is scheduled to open in 2004. For railway-based integrated transfer system, it is essential to develop intermodal information system for easy and better transfer to other travel modes. An understanding of mode choices by KTX passengers is crucial for the intermodal transportation planning. Recent development of Intelligent Transportation System made it possible for railroad users to access the information in a cabin or waiting areas at the station. Development of intermodal transportation information system will influence the relative demand for traveling by train from competing other transportation mode. The research is focused on a general overview of the ITS with an emphasis on intermodal transportation information system.

• Journal of the Korean Society for Railway
• /
• v.18 no.1
• /
• pp.63-70
• /
• 2015

Track irregularities have a strong influence on the safety and the ride comfort of trains as well as track maintenance work. A statistical analysis was conducted for track irregularities data measured in Kyoungbu high speed line using a track recording car(EM120). First, the characteristics of EM120, which adopted versine measurement system, were investigated and the transfer function of EM120 was examined. The distributions of the surface and the alignment which have short wavelength were considerably high and the distribution decreased as wavelength increases. A distribution analysis of the wavelength was carried out according to EN standards and most of the track irregularities were in a D1 wavelength range. The distributions of the amplitude of track irregularities were also investigated and the results show that the distributions of track irregularities decrease rapidly as amplitude increases. These results may be helpful in making track maintenance plans and revising track irregularities criteria.

• Journal of the Korean Society for Railway
• /
• v.6 no.3
• /
• pp.169-173
• /
• 2003

Transportation by railroad is superior to other transport in a mass transport, stability, rapid transit, delightfulness and low-pollution etc. But, it need to ensure a track stability that supports the train-load for high-speed in transportation by railroad. Ballast resistance force resists against the buckling of track taking a rail-tie's place. So, it plays an important role in a careful train-service. So, in this papers, we forced on measuring and theorizing about the Ballast Resistance Force that play a key role in track stability and high-speed. And we studied the mechanical property. Finally, we suggested the method of securing Ballast Resistance Force and the report for a careful train-service in high-speed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.5
• /
• pp.128-135
• /
• 2021

Thin-walled tubes have been widely used as energy absorbing devices because they are light and have high energy-absorption efficiency. However, the downside is that conventional thin-walled tubes usually exhibit an excessive initial peak crushing force (IPCF) and a large fluctuation in the load-displacement curve, and thus lack stability as energy absorbing devices. Corrugated tubes were introduced to reduce IPCF and to increase the stability of collision energy-absorbing devices. Since the performance of corrugated tubes is highly influence by geometry, design optimization methods can be utilized to optimize the performance of corrugated tubes. In this paper, we utilize shape design optimization based on an adaptive surrogate model for crashworthiness analysis. The amplitude and wavelength of the corrugation, as well as curvature changes in the features, are the design variables. A morphing methodology is adopted to perform shape design parameterization. Through numerical examples, we compare optimal design results based on the adaptive surrogate model, with optimal results based on conventional surrogate models, and we show that direct optimal design methods produce more efficient results.

• International Journal of Railway
• /
• v.3 no.2
• /
• pp.39-45
• /
• 2010

The RF-CBTC (Radio Frequency-Communication Based Train Control) System is a communication system in railroad systems. The communication method of RF-CBTC system is the wireless between the wayside device and on-board device. The wayside device collects its location and speed from each train and transmits the distance from the forwarding train to the speed-limit position to it. The on-board device controlling device controls the speed optimum for the train. In the case of the RF-CBTC system used in Korea, transmission frequency is 2.4 [GHz]. It is the range of ISM(Industrial Scientific and Medical equipment) band and transmission of voice and data is performed by CDMA (Code Division Multiple Access) method. So noises are made in the AWGN (Additive White Gaussian Noise) and fading environment. Currently, the SNR (Signal to Noise Ratio) is about 20 [dB], so due to bit errors made by noises, transmission of reliable information to the train is not easy. Also, in the case that two tracks are put to a single direction, it is needed that two trains transmit reliable voice and data to a wayside device. But, by noises, it is not easy that just a train transmits reliable information. In this paper, we estimated the BER (Bit Error Rate) related to the SNR of voice and data transmission in the environment such as AWGN and fading from the RF-CBTC system using the CDMA method. Also, we supposed the SNR which is required to meet the BER standard for voice and data transmission. By increasing the processing gain that is a ratio of chip transmission to voice and data transmission, we made possible voice and data transmission from maximally two trains to a wayside device, and demonstrated it by using Matlab program.

• Proceedings of the KIEE Conference
• /
• 2008.09a
• /
• pp.33-36
• /
• 2008

전기철도에서 사용되는 전원은 한전 계통을 통해 유입되고 별도의 전원 계통을 구축하여 운영한다. 따라서 한전 계통과의 인터페이스에 따른 국내외 기준을 만족하여 진기철도 계통전원 시스템을 구축하여야 한다. 본 논문에서는 철도차량 사업소 구축시 중수선, 종합 관리동등의 부하특성에 따른 부하역률 변화 및 전력변환장치를 연계되었을 때 계통전원에 미치는 고조파 영항을 연구하였다. 시뮬레이션을 통해 철도차량 사업소내의 계통전원이 국내외 기준에 적합할 수 있도록 제시하였다.

• Journal of the Korean Society for Railway
• /
• v.16 no.6
• /
• pp.447-453
• /
• 2013

Since PSDs(Platform Screen Doors) are set up at many subway stations, their design related to safety has become gradually important. In particular, the interference check with a running railway vehicle is the most important of performance indices because the collision between PSDs and vehicles can be dangerous for passengers in the car and on platforms. When the train comes into a station with a curvature, the passenger car has a large translational and rotational motion and the displacement is enough for coming in contact with PSD. The performance is affected by many design parameters such as rail design parameters and vehicle velocity. This study proposes dynamic analysis models for railway vehicles and rails. Some parameters were also considered in the models to determine their influence on the performance.