• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.04a
• /
• pp.61-61
• /
• 2018

Buckwheat is a important vegetable in asia for long time. Recently, Buckwheat has attracted attention to its potential for health benefit and especially as a gluten-free food. Conventional buckwheat studies have focused on seeds and sprouts, but we studied the components of the aerial parts and roots of buckwheat after harvesting. Therefore, we hope that this research will be a basic study to expand the application range of buckwheat plants which are discarded after harvesting. The ethanol extracts of aerial part and roots of buckwheat (Daegwan, Yangjul) were analysed using high performance liquid chromatography (HPLC). Rutin was detected as the major compound in Daegwan, Yangjul aerial part and Daegwan root extracts, except yangjul root extract. So we analysed Yangjul root extract using liquid chromatography-mass spectrometry (LC-MS) and then obtained the informations about the components in Yangjul root extract. Yangjul root extract was analysed by $LC-MS^n$ in negative ESI mode within the range m/z 150-2000 amu. Totally, four components was found in the Yangjul root extract and obtained the fragments ion patterns of ones. Further study, we have to confirm the structure of components in Yangjul root extract and try to more biological activity test the components for development as useful food or cosmetic ingredients.

• Korean Journal of Medicinal Crop Science
• /
• v.17 no.6
• /
• pp.427-433
• /
• 2009

Volatile flavor compounds from the shoot and root of Angelica gigas Nakai were extracted by HE (Hydrodistillation extraction), SDE (Simultaneous steam distillation & extraction), and SFE (Supercritical fluid extraction system), and analyzed by GC-MS. The amount and the number of chemical components in essential oils from shoot and root by SFE was the higher than those by other extraction methods. Respectively, thirty one constituents were identified from the essential oil of the shoot and root by HE, twenty seven and twenty three constituents were identified from the essential oil of shoot and root by SDE, thirty one and forty five constituents were identified from the essential oil of shoot and root by SFE. The result showed large differences in extraction methods and in plant parts of Angelica gigas Nakai. Also, the bioactive compounds in root part was identified as nodakenin and decursinol (11.95% and 8.42%, respectively) by SFE. These results suggested that SFE was the best extraction method for the increasing of extraction yield, the determination of volatile components and the increasing of bioactive compounds in the shoot and root of Angelica gigas Nakai.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.3
• /
• pp.351-362
• /
• 2014

A prerequisite for improving the quality of a product is to enhance the quality of its parts supplied from outsourced enterprises. An enterprise certified by ISO 9001 Quality Management System is expected to develop their effective quality assurance system and maintain it through continuous control and improvement, thereby ensuring the good quality of products that they produce. However, it is reported that small and medium-sized enterprises certified by ISO 9001 have difficulty establishing an effective quality assurance system. This study aims to propose a new method of improving a quality assurance system that can be more effective in small and medium-sized enterprises. This study collectively considered requirements specified in several international standards on quality system and the results of expert group brainstorming to identify evaluation areas and items for assessing a quality assurance system. Based on these evaluation areas and items, a set of checklists for diagnosing and improving a quality assurance system was developed. In order to demonstrate the usefulness of the proposed method, this study applied it to ten small and medium-sized enterprises and could identify four approaches for improving their current quality assurance system. The presented improvement method, which consists of establishment of quality goals and quality innovation plan, defective products corrective activities, 4M and design change process, improvement of customer quality information management, is expected to be utilized as a useful tool for the enhancement of the quality assurance system of small and medium-sized enterprises.

• The Korea Journal of Herbology
• /
• v.23 no.4
• /
• pp.149-157
• /
• 2008

Objectives: This study was to analyze the content changes of ${\beta}$-asarone and ${\alpha}$-asarone in A. gramineus according to its parts, extraction method, and fermentation. Methods: The change of ${\beta}$-asarone and ${\alpha}$-asarone was analysed with GC/MS, IR, and NMR. Results: In A. gramineus, ${\beta}$-asarone and ${\alpha}$-asarone in rhizome are 7 times and 4 times more than those in leaves respectively. And, in water extract of Acori Graminei Rhizoma, ${\beta}$-asarone was reduced to 77.8%-83.5%, and ${\alpha}$-asarone was reduced to 69.4%-72.2% compared with 50% MeOH extract. The amounts of ${\beta}$-asarone and ${\alpha}$-asarone were decreased apparently by 1 and 3 weeks fermantation with yeast activated solution. Conclusions: There was a change in the content of asarone pursuant to the medicinal part, extraction solvent, and fermentation. This result can be used as the basic data contributing to the stability of A. gramineus according to an appropriate clinical application.

• Applied Biological Chemistry
• /
• v.50 no.4
• /
• pp.344-347
• /
• 2007

The aerial parts of Lespedeza cuneata were collected, air-dried and extracted with 95% aqueous EtOH. Then it was successively partitioned with n-hexane, $CH_2Cl_2$, EtOAc and $H_2O$. Repeated Sephadex LH-20 column chromatography on the EtOAc- and $H_2O-soluble$ fractions gave four compounds. Their structures were elucidated as quercetin (1), kaempferol (2), desmodin (3) and homoadonivernith (4) on the basis of spectroscopic evidences such as $^{1}H-NMR$, $^{13}C-NMR$, 2D-NMR and MS spectrum. Desmodin (3) and homoadonivernith (4) have not been reported from this plant so far.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.6
• /
• pp.703-712
• /
• 2017

In this study, the fat contents and fatty acid compositions of Korean beef (tenderloin, loin, strip loin, chuck roll, foreshank, top blade, top round, brisket point, center of heel, and ribs) and pork (tenderloin, loin, shoulder loin, foreshank, jowls, ham, eye of round, belly, skirt meat, and ribs) parts were investigated. The fat contents of Korean beef ranged from 5.25% (top round) to 35.94% (brisket point). The major fatty acids were palmitic acid (C16:0), stearic acid (C18:0), and oleic acid (C18:1, n-9); especially, oleic acid was the most abundant. Loin had similar fat content as ribs, but there were some differences in fatty acid composition. Linolenic acid (C18:3, n-3) and linoleic acid (C18:2, n-6) were the most abundant fatty acids in strip loin and ribs (38.63 mg/100 g and 564.71 mg/100 g, respectively). Arachidonic acid (C20:4, n-6) was only found in strip loin, top blade, and ribs, and its amounts were in the following order: ribs (2.50 mg/100 g)> strip loin (1.33 mg/100 g)> top blade (1.19 mg/100 g). Total trans-fatty acid (TFA) content of top round was the lowest among all parts, and the ratio of unsaturated fatty acid (UFA) was the highest in foreshank. The fat contents of pork ranged from 4.16% (tenderloin) to 18.47% (belly), but there was no significant difference in fat content between tenderloin, loin, foreshank, ham, and eye of round. The major fatty acids were palmitic acid, stearic acid, oleic acid, and linoleic acid, and their amounts were in the following order: oleic> palmitic> linoleic> stearic acid. Docosahexaenoic acid (C22:6, n-3) was only detected in belly, and the TFA content of belly was the highest. The ratio of UFA was highest in ham. These findings will be useful in the development of standardization data on fatty acid composition in different parts of Korean beef and pork.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.361-364
• /
• 2005

Some bogie frames manufactured in 1999, 2000 year have the fatal problem. Three or four years later, the cracked end beam among them have discovered in 2002, 2003 year. The crack situation of the end beam have a bad effect on brake system. In that case, the cars would be in danger of derailment. To improve the end beam, a research of covering the whole field of welded type bogie frame was started. Main line real tests were performed at Young-Dong line. The stress of main positions for bogie frame was measured. Also up-down direction and left-right direction vibration acceleration of the bogie frame were measured. At this time the tests were performed for the three types bogie. The test result concludes that the crack cause of the end beam is not brake load but vibration at running mainly. It is estimated that the life of the improved car which end beam reinforced is safe within the car permitted life(25 years). The improvement methods of the end beam are presented by construction modification, parts modification. The integrity evaluation is inspected by analysis the real line test results, the improvement methods of the end beam.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.22 no.2
• /
• pp.87-94
• /
• 2018

In this study, seismic performance of bushings and their connection parts was analyzed by performing shaking table tests for various types of bushings widely used as auxiliary equipment of main transformers in domestic substations. As a result of the seismic tests of five types of 154 kV bushings according to the manufacturers, all the bushings secured the structural integrity even at the acceleration of 1.4 g and it was found that leakage of insulating oil didn't occur. Also, the average acceleration amplification rate at the upper part of the bushings was about 2.5 to 3.0 times higher than the lower one. On the other hand, when a representative 345 kV bushing was subjected to the seismic test, the structural integrity was secured even at 1.0 g acceleration similar to the design earthquake load level, but in this test, leakage of insulating oil occurred. However, when a stiffener restricting the connection of the bushing is installed in the same 345 kV bushing, the displacement of the bushing connection is controlled and the stiffener prevent the oil from leaking even at the acceleration of the designed seismic level.

• Journal of the Korean Vacuum Society
• /
• v.12 no.1
• /
• pp.1-6
• /
• 2003

An axial electron beam gun system, which emits the electron beam power of 50 kW, has been manufactured. The electron beam gun consists of two parts. One is the electron beam generation part. including the filament, cathode, and anode. The maximum beam current is 2 A and the acceleration voltage is 25 kV. The other part includes the focusing-, deflection-, and scanning coils. The beam diameter and ham trajectory can be controlled by these coils. The characteristic of each part is measured ior the optimum condition of evaporation process. Moreover, Helmholtz coil is installed inside the vacuum chamber to adjust the incident angel of the beam to the melting surface for the maximum evaporation. We report on the evaporation rates for zirconium(Zr) and gadolinium(Gd) metals which have the high melting temperatures.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05a
• /
• pp.571-576
• /
• 1996

Currently most nuclear power plants(NPPs) are adopted the mid-loop operation to minimize the overhaul period and save the operating cost. For mid-loop operation it is essential to install nozzle dam between RCS pipe and steam generator(SG). Because SG remains more highly contaminated with radioactive material than any other parts of the NPPs, the repairmen are very reluctant to carry out installing nozzle dam inside the SG. Until now, unfortunately, it appears that no practically applicable device was developed to provide the longstanding demand. Also the accidents have been reported by licenser event report during this operation mode due to loss of residual heat removal(RHR). The purpose of this paper is to conduct remotely blocking and disintegration of nozzle of a SG which has the highest radiation exposure during the maintenance in NPPs. The remote nozzle blocking device of a SG includes three bladders, hubs, air controller provisions to supply and contact air pressure into the bladders. This remote nozzle block device will give the larger operation margin to prevent the loss of RHR and minimize the radiation exposure dose to the repairman and shorten the overhaul periods.