• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.2
• /
• pp.237-241
• /
• 2005

In Bluetooth version 1.0, the frequency hopping algorithm was such that there was one piconet, using a specific frequency, resolving the frequency depending on the part of the digits of the device clock and the Bluetooth address. Basic pattern was a kind of a round-robin using 79 frequencies in the ISM band. At this point, a problem occurs if there were more than two devices using the same frequency within specific range. In this paper, we proposed a software-based adaptive frequency hopping method so that more than two wireless devices can stay connected without frequency crash. Suggested method was implemented with HDL(Hardware Description Language) and automatically synthesized and laid out. Implemented adaptive frequency hopping circuit operated well in 24MHz correctly.

• Nuclear Engineering and Technology
• /
• v.54 no.9
• /
• pp.3361-3379
• /
• 2022

A nuclear power plant (NPP) piping is designed against low-frequency earthquakes. However, earthquakes that can occur at NPP sites in the eastern part of the United States, northern Europe, and Korea are high-frequency earthquakes. Therefore, this study conducts bi-directional shaking table tests on actual-scale NPP piping and studies the response characteristics of low- and high-frequency earthquake motions. Such response characteristics are analyzed by comparing several responses that occur in the piping. Also, based on the test results, a piping numerical analysis model is developed and validated. The piping seismic performance under high-frequency earthquakes is derived. Consequently, the high-frequency excitation caused a large amplification in the measured peak acceleration responses compared to the low-frequency excitation. Conversely, concerning relative displacements, strains, and normal stresses, low-frequency excitation responses were larger than high-frequency excitation responses. Main peak relative displacements and peak normal stresses were 60%-69% and 24%-49% smaller in the high-frequency earthquake response than the low-frequency earthquake response. This phenomenon was noticeable when the earthquake motion intensity was large. The piping numerical model simulated the main natural frequencies and relative displacement responses well. Finally, for the stress limit state, the seismic performance for high-frequency earthquakes was about 2.7 times greater than for low-frequency earthquakes.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.4
• /
• pp.450-457
• /
• 2012

In this paper, we designed low phase noise frequency synthesizer with compact size for High frequency band (Ku-band). The paper addresses merits and demerits of single loop and dual loop frequency synthesizer. The phase noise characteristics of the phase-locked loop frequency synthesizer were predicted based on the analysis for phase noise contribution of noise sources. The proposed model in this paper more accurately predicts the low phase noise frequency synthesizer with compact size for high frequency band.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.2C
• /
• pp.226-233
• /
• 2009

A novel frequency offset estimation scheme using a periodogram is proposed for orthogonal frequency division multiplexing (OfDM) systems. A conventional scheme proposed by Ren has a problem that the fractional and residual frequency offset estimation steps do not compensate for the difference between the real frequency offset and estimated integer frequency offset in the noise channel. So, the frequency offset estimation performance of Ren's scheme is degraded. In this paper, a frequency offset estimation scheme is proposed, which has a larger estimation range than that of the factional and residual frequency offset estimation steps in Ren's scheme. The proposed scheme can compensate for the difference between the real frequency offset and estimated integer frequency offset, unlike Ren's scheme. From the simulation results, we can observe that the performance of the proposed scheme is better than that of Ren's scheme.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.28 no.4
• /
• pp.29-43
• /
• 2000

This study is carried out to investigate the cahracteristics of green management practices and green speed(i.e., ball-roll distance) on 129 Golf Courses in Korea, and to explain the effects of managemet practices that affect green speed. Data collected from green-keepers were subjected to frequency, correlation analysis, and multi-regression analysis using SPSSWIN(Statistical Package for the Social Science). The results are as follows. 1. In spring mowing height, 3.5-4 mm appeared the highest frequency(44.4%) and 4-4.5mm mowing height appeared the high frequency(41.0%). In summer mowing height, 4.5-5mm appeared the highest frequency(51.3%). In fall mowing height, 4-4.5mm appeared the highest frequency(41.0%). 2. In N-fertilizing amount of February and November, 0(zero) g/$m^2$ appeared the highest frequency. In N-fertilizing amount, of June and July 0-2 g/$m^2$ appeared the highest frequency. In N-fertilizing amount, of March, May, August, and September 2-4 g/$m^2$ appeared the highest frequency. In N-fertilizing amount, of October 2-4 or 6-8 g/$m^2$ appeared the highest frequency. 3. In spring topdressing times, 3-6 times appeared the highest frequency(52.6%). In spring topdressing amount, more than 2mm appeared the highest frequency(35.9%). In summer topdressing tierms, 0-3times appeared the highest frequency(71.8%). In summer topdressing amount, 0.5-1mm appeared the highest frequency(46.2%). In fall topdressing times, 0-3times appeared the highest frequency(47.4%). In fall topdressing amount, more than 2mm appeared the highest frequency(35.9%). 4. In spring irrigation tiems, 3-4times/a week appeared the highest frequency (30.6%). In spring irrigation amount, the irrigation below 5mm/day under appeared the highest frequency(38.7%). In summer irrigation times, 4-7times/ a week appeared the highest frequency(38.9%). In summer irrigation amount, 5-10mm/a day appeared the highest frequency(45.2%). In fall irrigation times, 2-3times/a week appeared the highest frequency(36.1%). In fall irrigation amount, the irrigation below 5mm/a day under appeared the highest frequency(45.2%). 5. In spring aeration times, 2 times appeared the highest frequency(55.2%). In spring aeration depth, 5-10mm appeared the highest frequency(81.6%). In fall aeration times, 1 time appeared the highest frequency(82.5%). In fall aeration depth, 5-10mm appeared the highest frequency(86.8%). 6. In spring green speed, 1.98-2.28 or 2.59-2.89mm appeared the highest frequency(32.7%). In summer green speed, 1.98-2.28mm appeared the highest frequency (46.9%). In fall green speed, 1.98-2.28mm appeared the highest frequency(38.8%). 7. The factors which affect green speed were mowing height, N-fertilizing, season, topdressing, irrigation, and aeration. Vertical mowing did not affect green speed. The order of the relevant important factors was mowing height >: N-fertilizing > season > topdressing > irrigation > aeration. Mowing height and N-fertilizing were the most important factors in green speed. As mowing height decreased, green sped always increased. As total N-fertilizing amount decreased, green speed increased. In summer, green sped decreased remarkably. As topdressing times increased and the topdressing amount decreased, green sped increased. As irrigation times increased and irrigation amount decreased, green speed increased.

• Journal of the Korea Convergence Society
• /
• v.8 no.7
• /
• pp.1-6
• /
• 2017

This paper presents the design of a frequency measurement device using ADC, EP2AGX FPGA and STM32 processor to accurately measure the frequency of a broadband high frequency signal. The ADC device used in this paper has a sampling frequency of 250 MSPS and a processing frequency bandwidth of 100 MHz. Due to its high sampling frequency, it is difficult to process in ordinary computers or processors, so we implemented the frequency measurement algorithm using the Altra EP2AGX FPGA. The measured frequency is sent to the direction detection controller in real time and fused with the phase signal to calculate the incident azimuth angle of the high frequency signal. The designed frequency measurement device is about 0.2 Mhz in frequency measurement error and 30% less than Anaren DFD-x, which is considered to contribute greatly to the design of radio monitoring and direction detection device.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.7
• /
• pp.1247-1251
• /
• 2016

This study aims to investigate the effect of sampling frequency to the time domain and frequency domain analysis of pulse rate variability (PRV). Typical time domain variables - AVNN, SDNN, SDSD, RMSSD, NN50 count and pNN50 - and frequency domain variables - VLF, LF, HF, LF/HF, Total Power, nLF and nHF - were derived from 7 down-sampled (250 Hz, 100 Hz, 50 Hz, 25 Hz, 20 Hz, 15 Hz, 10 Hz) PRVs and compared with the result of heart rate variability of 10 kHz-sampled electrocardiogram. Result showed that every variable of time domain analysis of PRV was significant at 25 Hz or higher sampling frequency. Also, in frequency domain analysis, every variable of PRV was significant at 15 Hz or higher sampling frequency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.11
• /
• pp.1735-1741
• /
• 1993

New family of frequency hopping patterns with long period and good Hamming autocorrelation and Hamming crosscorrelation properties which can be used for frequency hopped multiple access communication systems is introduced. Period of frequency hopping patterns is qk-1, the alphabet size of frequency hopping patterns is q, and the size of family of frequency hopping patterns is q, where k is arbitrary integer and q is power of prime number. The maximum value of out-of-Phase Hamming autocorrelation function of any frequency hopping pattern and Hamming crosscorrelation function of any two frequency hopping patterns in the family is qk-1, which corresponds to optima1 Hamming correlation properties. And the average number of hits per q*q square in one frequency hopping pattern and its time shifted version or two frequency hopping patterns in the frequency hopped multiple access communication systems is less than 1.

• Proceedings of the KIEE Conference
• /
• 1999.11c
• /
• pp.718-720
• /
• 1999

This paper describes a charge pump PLL architecture which achieves high frequency operation and fast acquisition. This architecture employs multi-phase frequency detector comprised of precharge type phase frequency detector and conventional phase frequency detector. Operation frequency is increased by using precharge type phase frequency detector when the phase difference is small and acquisition time is shortened by using conventional phase frequency detector and increased charge pump current when the phase difference is large. By virtue of this multi-phase frequency detector structure, the maximum operating frequency of 694MHz at 3.0V and faster acquisition were achieved by simulation.

• Electronics and Telecommunications Trends
• /
• v.34 no.5
• /
• pp.91-98
• /
• 2019

Optical frequency comb generators have been investigated as a signal source capable of generating highly stabilized ultrafast pulse lasers. The precise control of the optical frequency comb spacing by RF clock signals has led to a revolutionary paradigm shift in the precise measurement of time and frequency. Optical frequency combs also have advantages such as stable frequency spacing, stable number of lines, and robustness. Owing to these characteristics, optical frequency combs have been applied to the fields of high precision optical clock, communication, spectroscopy, waveform generation, and astronomy. In this article, we introduce the properties (i.e., generation methods, advantages, and so on) of various optical frequency combs, and discuss the expected future technological trends and applications.