• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.12
• /
• pp.1722-1724
• /
• 2003

The possibility of using cotton stems as a roughage source in animal feeding was explored. Ground cotton stems (T2 and T3) or stems treated with 0.5% urea (T4 and T5) were ensiled with pearl millet green fodder in double lined plastic bags of 3 kg capacity for 50 days. Formic acid (0.4% v/v) was sprayed on T3 and T5 silages. The treatments were compared with pearl millet silage alone (T1) which constituted the control. All the bags were placed in the silo pit of pearl millet silage. Results indicated that urea treatment of cotton stems increased and formic acid application reduced dry matter loss of the silages. Inclusion of cotton stems in the silage significantly (p<0.05) increased CF, ADF, cellulose and ADL due to its higher cell wall content. The hemicellulose was significantly lower in T3 (16.7%) and T5 (22.52%) as compared to T2 (23.45%) and T4 (24.6%) due to formic acid application. Ammoniation significantly increased NH3-N content in T4 (0.202%) and formic acid controlled NH3-N level in T5 (0.107%).The in sacco dry matter digestibility was significantly higher (p<0.05) in formic acid preserved silages T3 and T5 (47.73 and 47.93%) as compared to silages without formic acid (44.94 and 41.22 %) in T2 and T4 respectively, but lower than T1 (54.39%). It is concluded that cotton stems can be ensiled with pearl millet fodder in 1:4 ratio with or without urea treatment. Formic acid application further increases the silage quality.

• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.5
• /
• pp.522-529
• /
• 1998

This experiment was conducted to study the effects of lactic acid bacteria (LAB) inoculation either alone or in combination with cell wall degrading enzymes on the fermentation characteristics and chemical compositions of Rhodesgrass silage. Over to 1 kg of fresh Rhodesgrass sample a treatment of inoculant LAB with or without addition of an enzyme of Acremoniumcellulase (A) or Meicelase (M) or a mixture of both enzymes (AM) was applied. The treatments were control untreated, LAB-treated (application rate $1.0{\times}10^5cfu/g$ fresh sample), LAB+A 0.005%, LAB+A 0.01%, LAB+A 0.02%, LAB+M 0.005%, LAB+M 0.01%, LAB+M 0.02 %, LAB+AM 0.005%, LAB+AM 0.01%, and LAB+AM 0.02%. The sample was ensiled into 2-L vinyl bottle silo, with 9 silages of each treatment were made. Three silages of each treatment were incubated at 20, 30 and $40^{\circ}C$ for 2-months of storage period. All silages were well preserved with their fermentation quality has low pH values (3.91-4.26) and high lactic acid concentrations (4.11-9.89 %DM). No differences were found in fermentation quality and chemical composition of the control untreated silage as compared to the LAB-treated silage. Combined treatment of LAB+cellulases improved the fermentation quality of silages measured in terms of lower (p < 0.01) pH values and higher (p < 0.05) lactic concentrations than those of LAB-treated silages. Increasing amount of cellulase addition resulted in decrease (p < 0.05) of pH value and increase (p < 0.05) of lactic acid concentration. LAB + cellulase treatments (all cellulase types) reduced (p < 0.01) NDF, ADF and in vitro dry matter digestibility of silages compared with the control untreated silages. The fermentation quality and the rate of cell wall reduction were higher (p < 0.01) in the silages treated with LAB + cellulase A than in the silages treated with either LAB+cellulase M or LAB + cellulase AM. Incubation temperature of $40^{\circ}C$ was likely to be more appropriate environment for stimulating the fermentation of Rhodesgrass silages than those of 20 and $30^{\circ}C$.

• KIEAE Journal
• /
• v.16 no.4
• /
• pp.41-46
• /
• 2016

Purpose: This is a study on the planning of temporary housing for post application of Mega Sports facilities. The subject of the study is 2018 Pyeongchang Winter Olympics, which is to suggest building an alternative temporary housing using shipping containers(high cube), which solve the lack of accommodations and recycle temporary housing after Olympics, save money and be eco-friendly in Olympics. Method: This study includes this ; research on the a fact-finding survey about Mega sports facilities post application and demand survey on 2018 Pyeongchang Winter Olympics accomodations and an analysis about temporary housing plan. Furthermore we decided temporary housing building plan by analyzing residents' needs and traits of the housing etc. Through this, we made a schematic design for household units. Result: As a result, this study is a plan of making space, forms, and structure. The planned size is $38.4m^2$(L:12m, W:3.2m) except balcony, and indoor height is 2.5m. The space consists of entrance, bathroom, bedroom and living room with folding furniture system. Also there's a detailed floor plan of the ceiling, wall, and floor we drew up. The ceiling and wall consist of dampproof film, noncombustible board, fire proof urethane form, and color-designed sheet. The floor is composed of floor tile, cement mortar, light concrete(with heat coil), insulation, and dampproof film. Additionally, this study is a plan of interior dry wall with detail using modular construction method for work efficiency and quality improvement.

• Journal of Environmental Science International
• /
• v.23 no.7
• /
• pp.1299-1305
• /
• 2014

For evaluating the effect of various artificial planting soil properties on the Euonymus fortunei 'Emelad'n Gold' growth, a container green wall system experiment was conducted in a wall of greenhouse at Konkuk University, Glocal campus. The experimental artificial planting grounds were prepared with different organic soil conditioner ratios (Control, $A_4O_1$, $A_2O_1$ and $A_1O_1$) and with drought tolerance and an ornamental value Euonymus fortunei 'Emelad'n Gold' was planted. The soil and plant characteristics were investigated from April to Jun 2010. The volumetric soil moisture contents were significantly increasing order as the amount of organic soil conditioner level increased in order to $A_1O_1$ > $A_2O_1$ > $A_4O_1$ > Control. At 4 treatment, soil chemical properties were inversely related to organic soil container ratios increase. The differences of root collar caliper, number of branch, and survival rate between the organic soil conditioner ratio were not significantly affected by organic soil conditioner. But, plant height, internode length, leaf length and leaf width were significantly shorter on plants planted $A_1O_1$ than plants planted other treatments. Therefore, Euonymus fortunei 'Emelad'n Gold' had good growth response regardless of organic soil conditioner ratio and the plant is expected to be a highly valuable shrub for the green wall system if it should be considered in integration with stormwater retention or as a soil conditioner for increasing soil water contents in artificial planting soil.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.5
• /
• pp.72-81
• /
• 2018

Fireproof structures using concrete, built-up panels and dry walls are usually used in walls inside fire compartments. However, demand for glass walls is emerging due to increase in interest in visibility and external appearance. In this study on steel fire resistance walls using insulation glass, fire resistance tests and performance evaluations were conducted on 60 minute fire resistance walls and exterior walls which could be applied to interior fire compartments and 90 minute fire resistance walls which could be applied to curtain walls. According to the tests, the specimens satisfied the required fire resistance performance. The finite element analysis was conducted after the tests to evaluate the fire resistance performance of the glass walls. The analysis results showed that the preliminary evaluation of fire resistance performance would be feasible.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.1
• /
• pp.78-85
• /
• 1992

This experiment was carried out to investigate the heritabilities, phenotypic correlation, genetic correlation and path-coefficients for desirable characters on the lodging related traits. Characters, that had high relation degree with field lodging degree, were rice-straw length, Wl /P, W/I, Wl /d, L, Wl / A, W/l, P, W $s^2$/ $l^4$ etc. Breaking strength appear negative correlation having an intention to field lodging. The second inertia moment of culm diameter trunk (branch), cross section area, rice-straw thickness and trunk cross section didn't appear negative coefficient with field lodging. It is considered that rice-straw length, leaf dry weight and lodging index, because of high heritability, become selection index of characters for breeding. In direct, indirect effect, and right rice-straw wall thickness appear largest( $P_{7y}$=0.6904), the next is the order of leaf dry weight( $P_{3y}$=0.2848), root dry weight ( $P_{1y}$=0.2658), culm diameter ( $P_{6y}$=-0.2280), and negative relation appear the order of rice-straw length ( $P_{5y}$=-0.9640) and stem dry weight( $P_{2y}$=-0.7072), therefore, the smaller culm length and stem dry weight, the stronger to lodging. to lodging.

• Journal of the Korean institute of surface engineering
• /
• v.28 no.5
• /
• pp.309-319
• /
• 1995

The substrate patterned with the dry film has the cavity which has the $90^{\circ}$ wall angle. Electroplating Cu on this patterned substrate has the differrent shape history with the electrochemical parameters. By potential theory model, the reason of the variation of the shape change with the these parameters was investigated. The shape history could be explained by the current flow and the correlated area effects. By embedding the Ni layer between the Cu layers, shape history with the time was obtained experimentally and the results was compared with the numerical analysis by BEM. The adhesive Cr-Cu film in TAB application was etched with the various condition. The best condition for the etchant of the Cr-Cu film was found.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.1326-1331
• /
• 2009

Drying process in the cylindrical thin film layer of sludge with the thickness less than a few millimeters has been investigated. Thin film drying is specially designed and used to dry the viscous materials like sewage sludge. The thin film layer of sludge is dried on the metallic cylindrical surface through which thermal energy is supplied to the layer during drying. The wall temperature is assumed to be constant during drying in the present study for the simplification. In order to solve the equations, the mass transfer rate on the drying surface should be determined. The mass flux of evaporated water vapor on the surface is estimated with the formulation given in the literature. The effect of some physical parameters on drying has been examined to figure out the drying characteristics of the sludge layer.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.258-262
• /
• 2004

An analytical method for the free vibration of two circular plates coupled with a fluid was developed by the Rayleigh-Ritz method. The two plates with unequal thickness and diameter are clamped along the cylindrical vessel wall. It is assumed that the fluid bounded by a rigid cylindrical vessel is incompressible and non-viscous. The wet mode shape of the circular plates is assumed as a combination of the dry mode shapes of the plates. The fluid motion is described by using the fluid displacement potential and determined by using the compatibility conditions along the fluid interface with the plate. Minimizing the Rayleigh quotient based on the energy conservation gives a eigenvalue problem. It is found that the theoretical results can predict well the fluid-coupled natural frequencies with excellent accuracy comparing with the finite element analysis result.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.295-300
• /
• 2005

An analytical method for the hydroelastic vibration of a vessel composed of an upper annular plate and a lower circular plate is developed by the Rayleigh-Ritz method. The two plates are clamped along a rigid cylindrical vessel wall. It is assumed that the fluid bounded by a rigid cylindrical vessel is incompressible and non-viscous. The wet mode shape of the plates is assumed as a combination of the dry mode shapes of the plates. The fluid motion is described by using the fluid displacement potential and determined by using the compatibility conditions along the fluid interface with the plate. Minimizing the Rayleigh quotient based on the energy conservation gives an eigenvalue problem. It is found that the theoretical results can predict well the fluid-coupled natural frequencies comparing with the finite element analysis result.