• Title/Summary/Keyword: The development of technology

Search Result 41,971, Processing Time 0.083 seconds

Effects of Hot Water and Chilling Treatments of Bulblets Propagated by Tissue Culture on Sprouting and Bulb Development in Korean Native Lilies (조직배양 유래 자생나리 소인경의 온탕 및 저온처리가 맹아 및 비대에 미치는 효과)

  • Kim, Min-Hui;Lim, Young-Hee;Oh, Wook;Yun, Hae-Keun;Kim, Kiu-Weon
    • Horticultural Science & Technology
    • /
    • v.29 no.2
    • /
    • pp.87-94
    • /
    • 2011
  • This study was carried out to investigate the effects of hot solution soaking and chilling treatment on sprouting and enlargement of bulblets obtained through in vitro culture in Korean native lilies with ornamental values. In vitro bulblets of Lilium cernuum, L. hansonii, L. hansonii for. mutatum, L. leichtlinii, and L. tsingtauense were soaked in distilled water or 100 $mg{\cdot}L^{-1}$ $GA_3$ and $GA_{4+7}$ solution maintained at $35^{\circ}C$ for two hours (hot water treatment) and/or exposed at $4^{\circ}C$ for 0, 4, or 8 weeks (chilling treatment) and then planted in plastic trays filled with media and grown in a greenhouse at $20^{\circ}C$ and under 16 h photoperiod. In all species, no bulblet propagated by tissue culture sprouted without chilling or hot water treatment due to dormancy. For dormancy breaking, $GA_{4+7}$ hot solution treatment increasing sprouting by 55-96%, whereas distilled water or GA was not effective in sprouting. Chilling treatment for 4 weeks induced sprouting by 50-70% in L. cernuum and L. leichtlinii, whereas 8 weeks was needed for sprouting of L. hansonii and L. hansonii for. mutatum. Combined treatment of hot water and chilling treatments synergistically promoted sprouting. Especially, in L. cernuum and L. hansonii, $GA_{4+7}$ hot solution soaking prior to chilling for 4 weeks promoted sprouting by 35-45% compared with the reverse order. Enlargement of bulblets resulted from increase in fresh weight and diameter was promoted by the treatments that increased the sprouting percentage of bulblets. Only in L. cernuum, shoots emerged from bulblets soaked in hot $GA_{4+7}$ solution or chilled at $4^{\circ}C$ and shoot emergence rate was highest in bulblets soaked in hot $GA_{4+7}$ solution and then chilled for 8 weeks. From these results, the most effective method for bulblet sprouting and enlargement was to soak in hot $GA_{4+7}$ solution and then chill for 4 weeks in L. hansonii, hansonii for. mutatum, and leichtlinii, and to soak in hot $GA_{4+7}$ solution and then chill for 4 weeks in L. cernuum and tsingtauense.

A Study on the Improvement of Treatment Efficiency for Nitrogen and Phosphorus in Livestock Treatment System Using Constructed Wetlands (인공습지 축산폐수처리시스템에서 질소 및 인 처리효율 향상 방안)

  • Seo, Dong-Cheol;Park, Jong-Hwan;Kim, Ah-Reum;Kim, Sung-Hun;Lee, Seong-Tea;Jeong, Tae-Uk;Choi, Jeong-Ho;Lee, Sang-Won;Kim, Hyun-Ook;Cho, Ju-Sik;Heo, Jong-Soo
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.44 no.3
    • /
    • pp.434-441
    • /
    • 2011
  • To improve T-N and T-P removal efficiencies, removal efficiencies of pollutants in full-scale livestock wastewater treatment plant by natural purification method with water plant filtration and activated sludge beds were investigated under different re-injection rates and injection methods of livestock wastewater. The removal rates of COD, SS, T-N, and T-P in effluent in full-scale livestock wastewater treatment plant were in the order of 30% < 70% ${\leq}$ 100 % at different re-injection rates. The removal rates of pollutants in effluent in full-scale livestock wastewater treatment plant were higher as re-injection rate of livestock wastewater increased. Removal rates of COD, SS, T-N, and T-P by continuous injection were slightly higher than those by intermittent injection method in full-scale livestock wastewater treatment plant. Removal rates of COD, SS, T-N, and T-P by continuous injection method in full-scale livestock wastewater treatment plant with water plant filtration and activated sludge beds were 99.5, 99.8, 99.0 and 99.8%, respectively.

Anti-inflammatory effects of Cudrania tricuspidata twig sawdust fermented with Ganoderma lucidum mycelium (영지버섯균 발효 꾸지뽕나무 가지 톱밥 추출물의 항염증 활성)

  • Park, Se-Eun;Kim, Myung Kon;Kim, Seung
    • Journal of Mushroom
    • /
    • v.19 no.3
    • /
    • pp.225-233
    • /
    • 2021
  • In this study, we evaluated the anti-inflammatory effect of extract from Cudrania tricuspidata twig sawdust fermented with Ganoderma lucidum mycelium. Fermented Cudrania tricuspidata twig sawdust extracted with 70% ethanol and elucidated the potential signaling pathway in lipopolysaccharide (LPS)-induced RAW264.7 cells. Fermented Cudrania tricuspidata twig sawdust inhibits LPS-stimulated nitric oxide (NO) production without affecting cell viability in a dose-dependent manner and production of LPS-induced pro-inflammatory cytokines such as interleukin (IL)-1β, tumor necrosis factor (TNF)-α and prostaglandin2 (PGE2). Fermented Cudrania tricuspidata twig sawdust also suppressed the expression of the pro-inflammatory mediators such as inducible nitric oxide synthase (iNOS) and cyclooxygenase-2 (COX-2) in LPS-stimulated RAW264.7 cells. Moreover, Fermented Cudrania tricuspidata twig sawdust significantly attenuated LPS-induced IkappaB (IκB) degradation and suppressed nuclear factor kappa B (NF-κB) nuclear translocation. These results suggest that fermented Cudrania tricuspidata twig sawdust may have great potential for the development of anti-inflammatory agent.

Development of Menu Labeling System (MLS) Using Nutri-API (Nutrition Analysis Application Programming Interface) (영양분석 API를 이용한 메뉴 라벨링 시스템 (MLS) 개발)

  • Hong, Soon-Myung;Cho, Jee-Ye;Park, Yu-Jeong;Kim, Min-Chan;Park, Hye-Kyung;Lee, Eun-Ju;Kim, Jong-Wook;Kwon, Kwang-Il;Kim, Jee-Young
    • Journal of Nutrition and Health
    • /
    • v.43 no.2
    • /
    • pp.197-206
    • /
    • 2010
  • Now a days, people eat outside of the home more and more frequently. Menu labeling can help people make more informed decisions about the foods they eat and help them maintain a healthy diet. This study was conducted to develop menu labeling system using Nutri-API (Nutrition Analysis Application Programming Interface). This system offers convenient user interface and menu labeling information with printout format. This system provide useful functions such as new food/menu nutrients information, retrieval food semantic service, menu plan with subgroup and nutrient analysis informations and print format. This system provide nutritive values with nutrient information and ratio of 3 major energy nutrients. MLS system can analyze nutrients for menu and each subgroup. And MLS system can display nutrient comparisons with DRIs and % Daily Nutrient Values. And also this system provide 6 different menu labeling formate with nutrient information. Therefore it can be used by not only usual people but also dietitians and restaurant managers who take charge of making a menu and experts in the field of food and nutrition. It is expected that Menu Labeling System (MLS) can be useful of menu planning and nutrition education, nutrition counseling and expert meal management.

Hazard Analysis for the Application of Good Agricultural Practices(GAP) on Paprika During Cultivation (파프리카의 농산물우수관리제도(GAP)적용을 위한 재배단계의 위해요소 분석)

  • Nam, Min-Ji;Chung, Do-Yeong;Shim, Won-Bo;Chung, Duck-Hwa
    • Journal of Food Hygiene and Safety
    • /
    • v.26 no.3
    • /
    • pp.273-282
    • /
    • 2011
  • This study established hazards which may cause risk to human at farm during cultivation stage of paprika. Samples of plants (paprika, leaf, stem), cultivation environments (water, soil), personal hygiene (hand, glove, clothes), work utensils (carpet, basket, box) and airborne bacteria were collected from three paprika farms (A, B, C) located in Western Gyeongnam, Korea. The collected samples were assessed for biological (sanitary indications and major foodborne pathogens), chemical (heavy metals, pesticide residues) and physical hazards. In biological hazards, total bacteria and coliform were detected at the levels of 1.9~6.6 and 0.0~4.610g CFU/g, leaf, mL, hand or 100 $cm^2$, while Escherichia coli was not detected in all samples. In major pathogens, only Bacillus cereus were detected at levels of ${\leq}$ 1.5 log CFU/g, mL, hand or 100 $cm^2$, while Staphylococuus aureus, Listeria monocytogenes, E. coli O157 and Salmonella spp. were not detected in all samples. Heavy metal and pesticide residue as chemical hazards were detected at levels below the regulation limit, physical hazard factors, such as insects, pieces of metal and glasses, were also found in paprika farms. Proper management is needed to prevent biological hazards due to cross-contamination while physical and chemical hazards were appropriate GAP criteria.

Application of Ultrasonic Nano Crystal Surface Modification into Nitinol Stent Wire to Improve Mechanical Characteristics (나이티놀 스텐트 와이어의 기계적 특성 향상을 위한 초음파 나노표면 개질 처리에 대한 연구)

  • Kim, Sang-Ho;Suh, Tae-Suk;Lee, Chang-Soon;Park, In-Gyu;Cho, In-Sik;Pyoun, Young-Shik;Kim, Seong-Hyeon
    • Progress in Medical Physics
    • /
    • v.20 no.2
    • /
    • pp.80-87
    • /
    • 2009
  • Phase transformation, superelastic characteristics and variation of surface residual stress were studied for Nitinol shape memory alloy through application of UNSM technology, and life extension methods of stent were also studied by using elastic resilience and corrosion resistance. Nitinol wire of ${\phi}1.778$ mm showed similar surface roughness before and after UNSM treatment, but drawing traces and micro defects were all removed by UNSM treatment. It also changed the surface residual stress from tensile to compressive values, and XRD result showed less intensive austenite peak and clear martensite and additional R-phase peaks after UNSM treatment. Fatigue resistance could be greatly improved through removal of surface defects and rearrangement of surface residual stress from tensile to compressive state, and development of surface modification system to improve not only bio-compatability but also resistance to corrosion and wear will make it possible to develop vascular stent which can be used for circulating system diseases which run first cause of death of recent Koreans.

  • PDF

NIRS Calibration Equation Development and Validation for Total Nitrogen Contents Field Analysis in Fresh Rice Leaves (벼 생엽의 질소함량 현장분석을 위한 NIRS 검량식 개발 및 검증)

  • Song, Young-Eun;Lee, Deok-Ryeol;Cho, Seong-Hyun;Lee, Ki-Kwon;Jeong, Jong-Seong;Gwon, Yeong-Rip;Cho, Kyu Chae
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.58 no.3
    • /
    • pp.301-307
    • /
    • 2013
  • This study was evaluated high end research grade Near Infrared Reflectance Spectrophotometer (NIRS) to field grade multiple Near Infrared Reflectance Spectrophotometer (NIRS) for rapid analysis at fresh rice leaf at sight with 238 samples of fresh rice leaf during year 2012, collected Jeollabuk-do for evaluate accuracy and precision between instruments. Firstly collected and build database high end research grade NIRS using with 400 nm ~ 2500 nm during from year 2003 to year 2009, seven years collected fresh rice leaf database then trim and fit to field grade NIRS with 1200 nm ~ 2400 nm then build and create calibration, transfer calibration with special transfer algorithm. The result between instruments was 0.005% differences, rapidly analysis for chemical constituents, Total nitrogen in fresh rice leaf within 5 minutes at sight and the result equivalent with laboratory data. Nevertheless last during more than 8 years collected samples for build calibration was organic samples that make differentiate by local or yearly bases etc. This strongly suggest population evaluation technique needed and constantly update calibration and maintenance calibration to proper handling database accumulation and spread out by knowledgable control laboratory analysis and reflect calibration update such as powerful control center needed for long lasting usage of fresh rice leaf analysis with NIRS at sight. Especially the agriculture products such as rice will continuously changes that made easily find out the changes and update routinely, if not near future NIRS was worthless due to those changes. Many research related NIRS was shortly study not long term study that made not well using NIRS, so the system needed check simple and instantly using with local language supported signal methods global distance (GD) and neighbour distance (ND) algorithm. Finally the multiple popular field grades instruments should be the same results not only between research grade instruments but also between multiple field grade instruments that needed easily transfer calibration and maintenance between instruments via internet networking techniques.

Treatment and Attachment Characteristics of Biofilm of Phanerochaete chrysosporium PSBL-1 in Wastewater (Phanerochaete chrysosporium PSBL-1 생물막을 이용한 오.폐수 처리 및 부착특성)

  • Lee, Soon-Young;Kang, Ki-Cheol;Won, Chan-Hee
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.30 no.3
    • /
    • pp.271-277
    • /
    • 2008
  • The biofilm of white-rot fungi fully exposed in atmosphere are that operation is easy, management cost and energy waste is low. To develop biofilm of white-rot fungi fully exposed in atmosphere, basic test are as follows. To select most effective microoganism species, investigated treatment characteristics of wastewater containing non-biodegradable material for three species of white-rot fungi(Phanerochaete chrysosporium PSBL-1, Phanerochaete chrysosporium KCTC 6147, Trametes sp. KFCC 10941) and activated sludge. And then investigated attached and detached biomass of selected white-rot fungi species on HBC ring surface. Among the three strains tested, P. chrysosporium PSBL-1 and P. chrysosporium KCTC 6147 showed higher efficiency for organics removal than Trametes sp. KFCC 10941, and P. chrysosporium PSBL-1 showed higher efficiency for nitrogen removal than P. chrysosporium KCTC 6147 and Trametes sp. KFCC 10941. Respectively, 51$\sim$59.8%, 57.5$\sim$60.3% of NBDCOD was removed for P. chrysosporium PSBL-1 and P. chrysosporium 6147 in pH 3.5$\sim$5.5. TN removal efficiency showed 39.3$\sim$85.3%, 3.4$\sim$7.6% for P. chrysosporium PSBL-1 and P. chrysosporium 6147 in pH 4.5$\sim$11.5 respectively. Considered that white-rot fungi remove organism and nitrogen simultaneously, the microorganism selected white-rot fungi P. chrysosporium PSBL-1. White-rot fungi P. chrysosporium PSBL-1 attached on HBC ring surface 4,538 mg/L, 4,546 mg/L, 4,531 mg/L after 5 minutes, 4,575 mg/L, 4,573 mg/L, 4,568 mg/L after 10 minutes from initial MLSS 4,600 mg/L in pH 4, 7 and 10 respectively. Also detached biomass is negligible from right after attachment to 10 day in pH 4, 7 and 10.

Breeding of Strawberry 'Okmae' for Forcing Culture with Less Labor Requirement for Fruit Thinning (적과 노력 절감용 촉성 딸기 '옥매' 품종 육성)

  • An, Jae Uk;Shim, Jae Suk;Yoon, Hae Suk;An, Chul Geon;Hwang, Yeon Hyeon;Chang, Young Ho;Shon, Gil Man;Rho, Chi Woong;Jeong, Byoung Ryong
    • Horticultural Science & Technology
    • /
    • v.30 no.6
    • /
    • pp.780-783
    • /
    • 2012
  • A new strawberry cultivar (Fragaria ${\times}$ ananassa Duch.) 'Okmae' was developed from a cross between 'Toyonoka' and 'Maehyang'. This cultivar has a good fruit quality and suitable number of flowers per cluster for labor saving in fruit thinning. 'Gyoengnam No. 1' was selected as an elite line with vigorous plant growth, higher soluble solids content and fruit firmness after examining its characteristics and productivity in forcing cultures from 2007 to 2009. Farmer's field trial of 'Gyoengnam No. 1' was conducted in 2010 and it was registered as 'Okmae' thereafter. The general characteristics of 'Okmae' are vigorous growth habit, erect plant type, less number of leaf and elliptic leaf shape. 'Okmae' has long peduncle and 9-10 flowers per flower cluster which need less labor for fruit thinning. Fruits of 'Okmae' are conical having a bright red and glossy skin color. Although 'Okmae' has a smaller average fruit number per plant of 21.9 than that of the control cultivars, it's possible to produce high yield because of greater fruit weight of 26.0 g. 'Okmae' showed a high soluble solids content of $11.6^{\circ}Brix$, low acidity of 0.37%, and high firmness of $14.5g{\cdot}mm^{-2}$. It is sensitive to anthracnose and powery mildews, but high-quality strawberry can be harvested by using effective control measure.

Effect of economic growth, industrial structure, efficiency improvement, decarbonization of power sector and fuel substitution for the transition to low carbon society by 2050 (2050년 저탄소 사회로의 전환을 위한 경제성장, 산업구조, 효율개선, 전력 탈탄소화와 연료 대체의 효과)

  • Park, Nyun-Bae;Hong, Sungjun;Park, Sang Yong
    • Journal of Energy Engineering
    • /
    • v.23 no.4
    • /
    • pp.61-72
    • /
    • 2014
  • This paper analyzed transition pathways toward a low carbon society in Korea to meet global $2^{\circ}C$ climate target. Lower economic growth, industrial structure change, enhance of energy demand management, decarbonization of power sector, and replacement of low carbon fuel could reduce greenhouse gas (GHG) emission from fuel combustion in 2050 by 67% against in 2011, or by 74% against in BAU (Business-As-Usual). Lower economic growth contributes to 13% of cumulative emission reduction relative to BAU, industrial structure change 9%, enhance of energy demand management 72%, decarbonization of power sector 5% and replacement of low carbon fuel 1% respectively. Final energy consumption in 2050 needs to be reduced to 50% relative to 2011, or to 41% relative to BAU. Nuclear, coal and renewable energy represent 31%, 40%, 2% respectively among electricity generation in 2011, but 38%, 2%, 32% in 2050. CCS represents 23% of total generation in 2050. Emission intensity of electricity in 2050 was decreased to 19% relative to 2011, or to 24% relative to BAU. Primary energy in 2050 was decreased to 64% compared to 2011, or to 44% compared to BAU. Final energy consumption, primary energy supply and GHG emission from fuel combustion from 1990 to 2011 increased by 176%, 197%, 146%. Radical change from historical trend is required to transit toward a low carbon society by 2050. Appropriate economic growth, structural change to non-energy intensive industries, energy technology research, development and deployment (RD&D) in terms of enhancement of energy efficiency and low carbon energy supply technologies, and fuel change to electricity and renewable energy are key instruments.