• 펄프종이기술
• /
• 제45권4호
• /
• pp.27-33
• /
• 2013

Manufacturing fabrics from dissolving cellulosic pulp is increasing in these days. For making high quality of cellulose-based fabrics, control of cellulose DP (degree of polymerization), its alpha cellulose content, its brightness, and its crystallinity are important. To process the cellulosic raw material, refining of cellulosic fibers is essential, and it is important to know if refining affects those important cellulose properties. The effects of PFI mill and Valley beater refining on the alpha-cellulose content, cellulose DP, crystallinity, and paper mechanical properties of wood and two different cotton fibers were studied. The results showed that PFI mill refining rarely affected those properties. Fibers refined by a Valley beater displayed a small reduction in fiber length in comparison with those refined by a PFI mill. However, the Valley beater refining method produced almost no changes in cellulose properties, either. The refining process seemed to have very little effect on the cellulose DP, crystallinity index, or alpha-cellulose content until the freeness decreased to around 300 mL CSF for wood and 100 mL CSF for cotton fibers, respectively. There were also no differences in tensile strength development in two refining methods.

• Carbon letters
• /
• 제10권4호
• /
• pp.300-304
• /
• 2009

Thermal emissivity of nuclear graphite was measured with its oxidation degree. Commercial nuclear graphites (IG-110, PECA, IG-430, and NBG-18) have been used as samples. Concave on graphites surface increased as its oxidation degree increased, and R value (Id/Ig) of the graphites decreased as the oxidation degree increased. The thermal emissivity increased depending on the decrease of the R (Id/Ig) value through Raman spectroscopy analysis. It was determined that the thermal emissivity was influenced by the crystallinity of the nuclear graphite.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제43권1호
• /
• pp.22-28
• /
• 2021

Natural nonwoven silk fabric has attracted researchers' attention owing to its unique properties as a biomaterial. It is fabricated by reeling, wetting, and hot pressing natural silk filament from silkworm cocoons. In this study, silkworm cocoons were immersed in water at different temperatures for various durations to examine the effects of wet treatment on their crystallinity and morphology. As the treatment temperature and time increased, the cocoon's silk filament separation became more evident, and fibroin strands were observed in it. The crystallinity indexes of the silkworm cocoons increased until a treatment time of 2 h and remained constant thereafter. The increase in the crystallinity index using wet treatment was enhanced by increasing the treatment temperature. Although the weight loss of the silkworm cocoon was insignificant until 40℃, it was appreciable above this temperature, and the degree of weight loss constantly increased with increases in the treatment temperature and time.

• 펄프종이기술
• /
• 제46권4호
• /
• pp.37-43
• /
• 2014

The crystallinity and molecular weight of cotton linter need to be controlled to be more easily dissolved in NMMO during manufacture of clothing fabrics. Electron beam irradiation and sulfuric acid treatment were used as pre-treatment to reduce molecular weight of cotton linter more efficiently, and after the pre-treatment, peroxide bleaching was followed in alkaline condition. After those processes, the crystalline indices of the cotton linters were measured by XRD method, and other properties such as their alpha cellulose contents and degree of polymerization were measured. It was found that the crystallinity index of cotton linter was decreased as the irradiation of electron beam increased while increased as the dose of sulfuric acid increased. These results strongly suggested that electron beam damaged the crystalline structure of the cellulose directly while sulfuric acid dissolved mostly non-crystalline area of the cellulose structure.

• 대한기계학회논문집A
• /
• 제26권5호
• /
• pp.813-821
• /
• 2002

Glass fiber reinforced PET matrix composite was manufactured by rapid press consolidation technique as functions of temperature, pressure and time in pre-heating, consolidation and solidification stages. The optimal manufacturing conditions for this composite were discussed based on the void content, tensile, interlaminar shear and impact properties. In addition, the levels of crystallinity with various manufacturing conditions were measured using differential scanning calorimetry to investigate the mechanical properties of this composite material as a function of crystallinity. Among many processing parameters, the mold temperature and the cooling rate after forming were found to be the most critical factors in determining the level of crystallinity and mechanical properties. The level of crystallinity affects the tensile properties to some degree. However, impact properties are affected much more. It also affects the degree of ductility, which determines the impact energy of this material.

• 한국의류학회지
• /
• 제2권2호
• /
• pp.245-252
• /
• 1978

In order to obtain some information for solvent dyeing, polyethylene terephthalate (PET) was treated with water, tetrachloroethylene yarn (TCE), and water/TCE emulsion for three hours at the temperatures from $40^{\circ}$ to $140^{\circ}C$. The change of fine structure of substratum by measuring the shrinkage, the degree of crystallinity, the stress relacxation modulus and Young's modulus. The P.E.T. film was also treated in water (at $140^{\circ}C$) for 4 hours to stabilize the substratum. By means of film roll cyliderical method, the Disperse Blue 27 was diffused. Then, calculated the diffusion coefficient and examined the application of WLF equation. However, the temperature dependence of the shrinkage could be explain with WLF equation, the diffusion coefficient couldn't be applied the WLF equation when the substratum was stabilized. From the result, the effects on shrinkage were in the order of water

• International Journal of Industrial Entomology and Biomaterials
• /
• 제42권1호
• /
• pp.7-13
• /
• 2021

In the present study, the effect of heat treatment on the crystallinity of the outside of silkworm cocoon in nine different silkworm varieties was studied using ATR-FTIR spectroscopy. Additionally, the morphological structure and moisture regain of the cocoon were examined. The silkworm cocoon showed different colors and external features depending on the silkworm variety. Moreover, the thickness of the filament (15.3-27.6 ㎛) and moisture regain of the cocoon (9.0%-11.0%) were quite different depending on the silkworm variety. The crystallinity index of the cocoon outside varied from 52.1% to 56.1%, depending on the silkworm variety. J300 and MO42 showed the highest (56.1%) and the lowest (52.1%) crystallinity index, respectively, indicating that the microstructure of sericin of the outside of the cocoon was affected by the silkworm variety. Regardless of silkworm variety, their crystallinity indexes decreased from 52.1%-56.1% to 49.9%-43.6% depending on the silkworm variety by the heat treatment at 250 ℃. Interestingly, the crystallinity degree decrease was somewhat different depending on the silkworm variety, implying that the cocoon sericin microstructure is strongly influenced by the silkworm variety.

• 한국포장학회지
• /
• 제25권2호
• /
• pp.47-50
• /
• 2019

식품과 포장재의 상호 작용 정도를 나타내는 분배 계수는 포장재의 구조 및 특성은 물론이고 내용물의 구조적 특성 그 중에서도 결정도 (crystallinity)에 의해서도 많이 좌우되고 있다. 온도의 상승에 따른 식품 성분의 결정도 상실은 내용물과 포장재의 상호 작용 증가를 초래하고 있다. 따라서, 최근 가공 식품 개발의 큰 부분을 차지하고 있는 즉석 식품의 경우 제조시 가열은 물론 소비자에 의해 한번 더 가열된다는 점에서 내용물과 포장재의 상호 작용에 의한 이취 발생 및 식품 안전성에 부정적인 요인이 될 수 있다는 점에서 이에 대한 체계적인 연구가 필요하다고 하겠다.

• Carbon letters
• /
• 제13권3호
• /
• pp.151-156
• /
• 2012

This study considered the effect of the heat treatment temperature on the compressive strength of coal powder compacts affected by density, porosity, and crystallinity. Coal powder compacts were made by pressing of milled coal powder and were heat treated at 200, 400, 600, 800, and $1000^{\circ}C$. The density and porosity of the heat treated specimens at each temperature were measured using the Archimedes method and changes in crystallinity were analyzed using Raman spectroscopy. Increases in compressive strength at $600^{\circ}C$ or higher temperatures were proportionally related to increases in the density and the degree of crystallinity.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.164-168
• /
• 1996

The relation between crystallinity and thermal history in low density polyethylene thin films and their effect on electric conduction phenomena and dielectric breakdown was studied. The low density polythylene thin films obtained by the solution growth method heat-treated at 140[$^{\circ}C$] for 2 h and subsequently cooling to various ways. The degree of crystallinity was estimated by the X-ray diffraction measurement for the specimen of slowly cooling, ICE quenching and liquid nitrogen quenching. The result shows that the crystallinity decreases become faster as the cooling speed increased, and that conduction phenomenon is governed by the space charge limited current in high field. It was found that the dielectric breakdown field increases with an increase in cooling speed and test number in self-healing breakdown method.