• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.169-171
• /
• 2009

We have fabricated CIGS thin film absorber layers by the evaporation of CIGS powders which were synthesized by solutions with different atomic ratio compositions. We found that the polycrystalline structural properties and optical properties of the deposited CIGS thin films were strongly dependent on the CIGS powder synthesis solution compositions. For three different solution compositions, Cu:In:Ga:Se= 4:3:1:8, 8:3:1:8, 12:3:1,8, the deposited thin film crystalline structures were varied form InSe crystalline structure to CIGS chalcopyrite structures. Our results showed that CIGS powder evaporation is potential for the one step fabrication process for CIGS thin film absorber layer deposition.

• Korean Chemical Engineering Research
• /
• 제43권1호
• /
• pp.176-180
• /
• 2005

방향족 Schiff base 메소제닉 단위와 폴리메틸렌 유연격자로 이루어진 한 계열의 주사슬 액정중합체와 네 계열 화합물의 액정성을 살펴보았다. 이들의 열적 성질과 액정성은 시차 주사 열분석기와 가열판이 부착된 편광현미경에 의하여 조사하였다. 중합체와 화합물 액정상의 성질은 중앙 폴리메틸렌 유연격자와 말단 알콕시기의 길이에 크게 의존하였다. 중합체 I과 계열 III 화합물은 녹는점과 등방성액체화 전이온도에서 짝수-홀수 효과를 보여 주었으나 계열 II와 IV 화합물은 등방성액체화 전이온도에서만 짝수-홀수 효과를 나타내었다. 편광현미경을 통하여 이들의 광학구조를 관찰하였을 때 네마틱과 스멕틱 액정상을 형성하였다.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 추계학술발표대회 논문집
• /
• pp.149-153
• /
• 2011

The PC1D is widely used for modeling the properties of crystalline silicon solar cell. Optimized doping profile in crystalline silicon solar cell fabrication is necessary to obtain high conversion efficiency. Doping profile in the forms of a uniform, gaussian, exponential and erfc function can be simulated using the PC1D program. In this paper, the doping profiles including junction depth, dopant concentration on surface and the form of doping profile (gaussian, gaussian+erfc function) were changed to study its effect on electrical properties of solar cell. As decreasing junction depth and doping concentration on surface, electrical properties of solar cell were improved. The characteristics for the solar cells with doping profile using the combination of gaussian and erfc function showed better open-circuit voltage, short-circuit current and conversion efficiency.

• 폴리머
• /
• 제29권6호
• /
• pp.523-535
• /
• 2005

선형 방향족 폴리에스테르는 열방성 액정중합체의 대표적 예로 지금까지 그 구조-액정성 관계가 많이 연구되었다. 본 논문에서는 지난 4반세기 동안 본 연구진이 행한 연구결과를 중심으로 액정성 전방향족 폴리에스테르의 열적특성 및 액정성을 그 화학구조와 관련지어 논의한다. 특히 미세화학구조의 변경이 어떻게 액정성에 영향을 주는가에 논의의 초점을 두었다. 특히 선형구조에서 크게 벗어나는 복합형 액정성 폴리에스테르 및 액정성 고차가지구조 폴리에스테르도 조감하였다. 고차가지구조 고분자는 덴드리머와 관련하여 많은 관심을 끌고 있다. 이 고분자들의 합성법도 말미에 소개하고 있다.

• 마이크로전자및패키징학회지
• /
• 제6권4호
• /
• pp.41-48
• /
• 1999

실리카는 에폭시를 기지재로 하는 전자봉지재의 충진제로써 널리 사용되고 있는 재료이나 이의 낮은 방열성으로 인해 고방열성을 요구하는 부분에는 적용이 어렵다. 충진제 입자들의 지름비를 조합함으로써 최대충진 밀도를 높혀 고충진을 가능하게 하며 유동성도 향상된다는 점을 고려하여 높은 유동성을 가진 결정성 실리카(crystalline silica)를 큰 입자로 하고, 높은 열전도도와 낮은 열팽창계수를 가지지만 상대적으로 고각인 AlN을 작은 입자로 선정하여 혼합충진에 따른 EMC의 물성을 평가하였다. 실리카/AlN의 혼합비에 따른 EMC의 물성측정 결과, AlN의 투입분율을 0.3으로 하였을 때가 AlN의 투입에 따른 물성향상 효과가 가장 뛰어남을 확인 할 수 있었다. 따라서 AlN을 결정성 실리카와 최대 충진밀도에서 혼합하여 EMC에 적용할 경우에, 유동성의 저하없이 AlN의 소량투입만으로 뚜렷한 물성향상 효과를 얻을 수 있음을 확인할 수 있었다.

• 한국주조공학회지
• /
• 제27권5호
• /
• pp.198-202
• /
• 2007

In the present study, the high temperature mechanical properties and creep resistance of Mg-Zn-Y-Ca alloys has been investigated. The Mg-4Zn-0.8Y alloy consists of ${\alpha}$-Mg matrix and icosahedral quasicrystalline phase. Calcium addition into Mg-4n-0.8Y based alloy results in the formation of ${\tau}(Ca_{2}Mg_{6}Zn_{3})$ and $Mg_{2}Ca$ as the second solidification phases. Creep properties of the Mg-Zn-Y and Mg-Zn-Ca based alloys measured at applied stresses between 65 MPa and 85 MPa are significantly improved with adding calcium and yttrium, respectively. The improved creep resistance is due to the formation of thermally stable $Mg_{2}Ca$ phase.

• 한국주조공학회지
• /
• 제28권6호
• /
• pp.261-267
• /
• 2008

In-situ quasicrystalline icosahedral (I) phase reinforced Ti-based bulk metallic glass (BMG) matrix composites have been successfully fabricated by using two distinct thermal histories for BMG forming alloy. The BMG composite containing micron-scale Iphase has been introduced by controlling cooling rate during solidification, whereas nano-scale I-phase reinforced BMG composite has been produced by partial crystallization of BMG. For mechanical properties, micron-scale I-phase distributed BMG composite exhibited lower strength and plasticity compared to the monolithic BMG. On the other hand, nano-scale icosahedral phase embedded BMG composite showed enhanced strength and plasticity. These improved mechanical properties were attributed to the multiplication of shear bands and blocking of the shear band propagation in terms of isolation and homogeneous distribution of nanosize icosahdral phases in the glassy matrix, followed by stabilizing the mechanical and deformation instabilities.

• Bulletin of the Korean Chemical Society
• /
• 제21권1호
• /
• pp.110-117
• /
• 2000

A series of new liquid crystalline dimesogenic compounds with chiral tails was synthesized, and their thermal and liquid crystalline properties were studied. The chain length of the central polymethylene spacers (x) was varied from dimethylene (2) to decamethylene (12). These compounds were characterized by elemental analysis, IR and NMR spectroscopy, differential scanning calorimetry (DSC), and cross-polarizing microscopy. All compounds were found to be enantiotropically liquid crystalline, and the values of melting ($T_m$) and isotropization temperature ($T_i$) as well as enthalpy change (Δ$H_i$) and entropy change for isotropization (Δ$S_i$) decreased in a zig-zag fashion revealing the so-called odd-even effect as x increases. Their mesomorphic properties fall into three categories depending upon x; (a) compounds with x=2 and 4 formed two different mesophases, smectic and cholesteric phases in that order on heating, and vice versa on cooling, (b) compounds with x=3, 7, 8, 10 and 11 reversibly formed only the cholesteric phase, and (c) compounds with x=5, 6, 9 and 12 exhibited only a cholesteric phase on heating, whereas on cooling they formed two different mesophases, cholesteric and smectic phases, sequentially.

• Journal of Magnetics
• /
• 제12권4호
• /
• pp.137-140
• /
• 2007

We have studied the temperature dependent magnetic properties and crystalline phase transitionn in small amount Fe doped nickel chromite. The Crystalline structure of $NiCr_{1.7}Fe_{0.3}O_4$ is spinel cubic (Fd-3m) structure with a lattice constant $a_0=8.317\AA$ at room temperature. The magnetic $N\acute{e}el$ temperature $(T_N)$ of the Fe doped nickel chromite sample is determined to be 250 K. The $M\ddot{o}ssbauer$ spectra exhibit that there are two magnetic phases with the two different sites for the $Cr^{3+}$ ions. The spectrum at 4.2 K is fitted to two magnetic components of the magnetic hyperfine fields $H_{hf}=496$ and 485 kOe. From the spectrum at 295 K, the electric quadrupole splittings are observed with large values of 0.49 and 0.50 mm/s, respectively. The values of the isomer shifts at all temperature ranges show that the Fe ions are ferric states. We are suggested that the dynamic Jahn-Teller distortion and anisotropic magnetic relaxation effects due to the crystalline phase transition.

• 연구논문집
• /
• 통권33호
• /
• pp.147-155
• /
• 2003

In order to fabricate porous materials having an anisotropic thermal conductivity by aligning plate-shaped pores structure, alumina powder (AM-21, mean particle size $4\mum$) and flake crystalline graphite was used. The aligned pore structure was realized using multi-pressing process. Degree of pore orientation increased with the number of pressing and thermal conductivity, parallel to the pressing direction, decreased with the number of pressing. Thermal conductivity decreased significantly to the addition of 30vol% crystalline graphite, however, in the case of 60vol%, thermal conductivity did not decrease significantly due to the breakage of crystalline graphite. An anisotropy of the thermal conductivity increased with the content of crystalline graphite up to 30vol%. Graded pore structure was fabricated by controlling the content and size of crystalline graphite, which provides, possibly, the enhancement in mechanical strength and thermal insulation properties of the insulating bricks.