• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.26 no.4
• /
• pp.343-355
• /
• 2021

Eelgrass, Zostera marina L., was widely distributed around Sinyangseopji Beach in Bangdu Bay, on the eastern coast of Jeju Island, until breakwater construction in the late 1990s resulted in its complete loss. Six experimental sites were identified for restoration of the Z. marina bed in Bangdu Bay. Using the staple method, 500 Z. marina shoots were transplanted at each site in January 2019 and 2020. The transplants, along with environmental parameters, were monitored for 10 months following transplantation. There were significant differences in underwater irradiance, water temperature, and salinity among the sites, but all were suitable for Z. marina growth. The Ulva species, an opportunistic alga, appeared in spring and accumulated during summer at all sites; however, there was no significant effect of Ulva species on the survival and growth of the eelgrass transplants. Most of the transplanted Z. marina survived, and after 3 months, the density increased by 112.5-300% due to vegetative propagation, with a rapid rate of increase observed during spring and early summer at all sites. For 1-2 months after transplanting, the Z. marina shoots showed signs of transplant shock, after which the shoot density increased at all sites, confirming that all transplants adapted well to the new environment. However, in both 2019 and 2020, during late summer to early fall, the sites experienced heavy damage from typoons (twice in 2019 and three times in 2020) that hit Bangdu Bay. The transplants at two sites located in the center of Bangdu Bay were completely destroyed, but those at three sites located to the west of the bay showed a 192-312% increase in density. Thus, we confirmed that the Bangdu Bay Z. marina bed can be restored, with the highest probability of success for Z. marina restoration on the western side of Bangdu Bay, which is protected from typhoons.

• Tuberculosis and Respiratory Diseases
• /
• v.55 no.2
• /
• pp.154-164
• /
• 2003

Background : Until the early 1990's in Korea, treatment outcomes of patients with pulmonary tuberculosis in the private sector were reported to be inferior to those of the public health center under the National Tuberculosis Programme. The purpose of this study was to analyze the clinical characteristics and the treatment efficacy of the patients with pulmonary tuberculosis recently diagnosed at a private general hospital. Materials and Methods : The study included all pulmonary tuberculosis patients diagnosed at Samsung Medical Center and notified to the public health center from August 2000 to January 2001. Results : Of the 232 patients included in the study during a 6-month period, 188 were (81.0%) initial treatment cases and 44 (19.0%) were re-treatment cases. Eighty-three (35.8%) patients had smear-positive sputa, and 27 (11.6%) had smear-negative, culture-positive sputa. Initial sputum examinations were not performed in 47 (20.3%) patients. A six-month, short-course treatment using isoniazid, rifampin, ethambutol and pyrazinamide was prescribed for 31.4% of the patients under the initial treatment. The success rate (cured plus treatment completed) of the initial treatment for the smear-positive patients was 69.1%. Eleven (13.3%) of the 83 patients with smear-positive pulmonary tuberculosis discontinued their treatment without notice. Conclusions : To improve the treatment efficacy and decrease the default rates of the patients with pulmonary tuberculosis in the private sector, further efforts are required in line with the Korean Academy of Tuberculosis and Respiratory Disease Treatment Guidelines and in the implementation of an appropriate model of public-private mix for tuberculosis control in Korea.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.2
• /
• pp.168-176
• /
• 2011

Purpose: This study aims at investigating the influence of various insertion torques on thermal changes of bone. A proper insertion torque is derived based on the thermal analysis with two different implant designs. Materials and methods: For implant materials, bovine scapula bone of 15 - 20 mm thickness was cut into 35 mm by 40 - 50 mm pieces. Of these, the pieces having 2 - 3 mm thickness cortical bone were used as samples. Then, the half of the sample was immersed in a bath of $36.5^{\circ}C$ and the other half was exposed to ambient temperature of $25^{\circ}C$, so that the inner and surface temperatures reached $36.5^{\circ}C$ and $28^{\circ}C$, respectively. Two types of implants ($4.5{\times}10\;mm$ Br${\aa}$nemark type, $4.8{\times}10\;mm$ Microthread type) were inserted into bovine scapula bone and the temperature was measured by a thermocouple at 0.2 mm from the measuring point. Finite element method (FEM) was used to analyze the thermal changes at contacting surface assuming that the sample is a cube of $4\;cm{\times}4\;cm{\times}2\;cm$ and a layer up to 2 mm from the top is cortical bone and below is a cancellous bone. Boundary conditions were set on the basis of the shape of cavity after implants. SolidWorks was used as a CAD program with the help of Abaqus 6.9-1. Results: In the in-vitro experiment, the Microhead type implant gives a higher maximum temperature than that of the Br${\aa}$nemark type, which is attributed to high frictional heat that is associated with the implant shape. In both types, an Eriksson threshold was observed at torques of 50 Ncm (Br${\aa}$nemark) and 35 Ncm (Microthread type), respectively. Based on these findings, the Microthread type implant is more affected by insertion torques. Conclusion: This study demonstrate that a proper choice of insertion torque is important when using a specific type of implant. In particular, for the Microthread type implant, possible bone damage may be expected as a result of frictional heat, which compensates for initial high success rate of fixation. Therefore, the insertion torque should be adjusted for each implant design. Furthermore, the operation skills should be carefully chosen for each implant type and insertion torque.

• The Journal of Information Technology
• /
• v.1 no.2
• /
• pp.81-102
• /
• 1998

It is common description that modern society is In the era of limitless competition. In order to challenge the change of economy and its management at home and abroad, organization should be changed anew, and in this case, there accompanies conflict or trouble whether the subject of change wants it or not. Therefore, according to change, we should concern with settlement of small troubles as well as big ones, and by managing the conflict or trouble productively and originally, it should be utilized as new fatality and chance to develop something in organization. In the system organized by people, there exist various conflicts in accordance with the target and want of the system, therefore giving no freedom to each Individual member of the system, and this is an unavoidable tate in consideration of the modem society where the survival of mankind and human systems should be guaranteed. Therefore, it determines the coordinates of success of any of organizations to manage conflict or trouble well, and so, when decreasing or increasing conflicts so that the organization exerts its full influence, it is note worthy that conflict itself should be rationally and efficiently managed. In a view point of the theory of organization and its behavior, relating job satisfaction with the performance and validity of organization, the influence of individual conflict is so great on the rate of job transfer within an organization or nonattendance, even on the productivity of the organization. So, the manager to cope with conflict within an organization should devise following three plans to manage conflict for job satisfaction and conflict settlement. In conclusion, it is suggested that in order to manage conflict within an organization well, some plans to control conflict should be well utilized while giving more efforts to improving management of individual conflict, job satisfaction, validity of organization, productivity, etc and all the members of organization should remember that the Issue of conflict within an organization be recognized ad an opportunity of new development and a way to settle a trouble within an organization, and a direction of conflict management should be suggested so that new innovation ca be created.

• Journal of the Korean Society for Library and Information Science
• /
• v.31 no.4
• /
• pp.289-318
• /
• 1997

The purpose of this study is to identify users behavioral characteristics for using the online catalog opened in May 1996 at Duksung Women's University Library. 278 student users were surveyed from October 4th to 8th in 1996. Major findings are as follows. 1. Most users$(87.4\%)$ prefer the online catalog to the card catalog and regard the online catalog easy to use$(89.6\%)$ 2. $(65.8\%)$ of users are active users who frequently use the online catalog at least 10 times or more per semester. 3. $10.4\%$ of users feel the online catalog difficult because they do not know how to use it. 4. Most users prefer the menu search mode among menu, command and fill-in-blank search modes offered by DISCOVER. The most preferred access points are the title for known-item search and subject headings for subject search. 5. User's attitude toward the online catalog is very favorable$(83.5\%)$, however, the search success rate is rather low $(77.0\%)$ compared to that of the card catalog $(87.0\%)$ 6. The title and author are regarded easy to use among access points offered by DISCOVER. Classification numbers and call numbers are the least easy access points to use. 7. Since users show lack of knowledge of how to use the online catalog, education and training programs on the online catalog use for users are needed. 8. Users showed different search patterns for pursuing different search goals. The most preferred access points are the title for known-item search and subject headings for subject search. These search behaviors are different from those in using the card for both the known-item search and subject search was the title.

• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.4
• /
• pp.269-275
• /
• 2013

Purpose: The aim of this retrospective study was to evaluate the influence of implant diameter, length and placement to implant stability. Materials and methods: Total 90 implants (US II plus$^{TM}$, Osstem co, Busan, Korea) of 72 patients were determined as experimental samples. The factors of diameters(${\phi}$ 4 mm, ${\phi}$ 5 mm), lengths (10 mm, 11.5 mm, 13 mm), and implant placement (maxilla, mandible) were analyzed. The stability of the implants was measured by resonance frequency analysis (RFA) at the time of implant placement and impression taking. The difference of ISQ values according to patient's gender was evaluated by Independent t-test. ISQ values were compared between implant diameter, length and placement using one-way ANOVA and Tukey HSD test (${\alpha}=.05$). To compare ISQ values between at the time of surgery and impression taking, paired t-tests were used (${\alpha}=.05$). Results: The change of implant length did not show significant different on the ISQ value (P>.05). However, 5 mm diameter implants had higher ISQ values than 4 mm diameter implants (P<.05). Implants placed on the mandible showed significantly higher ISQ values than on the maxilla (P<.05). Conclusion: In order to increase implant stability, it is better to select the wider implant, and implants placed on mandible are possible to get higher stability than maxilla. ISQ values at impression taking showed higher implant stability than ISQ values at implant placement, it means that RFA is clinically effective method to evaluate the change of implant stability through the osseointegration. The consideration of the factors which may affect to the implant stability will help to determine the time of load applying and increase the implant success rate.

• Korean Journal of Veterinary Research
• /
• v.33 no.1
• /
• pp.151-169
• /
• 1993

The present study was carried out to investigate the best condition for nuclear-cytoplasm fusion and in vitro culture of nuclear transplanted embryos and to investigate the production of nuclear transplanted offsprings. The nuclei from 2-, 4- and 8-cell mouse embryos were transferred into enucleated 2-cell embryos, and the reconstituted embryos were submitted to direct current(DC) pulses at output voltage of 1.0, 1.5 and 2.0 kV/cm for 100, 150 and $200{\mu}$ sec to induce cell fusion. 1. The culture of intact or zona cut 2-cell embryos in the medium supplemented with cytochalasin B($5{\mu}g/m{\ell}$) and colcemide($0.1{\mu}g/m{\ell}$)for 30 and 60 minutes did not affect the development to later stage. 2. The in vitro developmental rates of group A(a nucleus from one of the blastomeres was removed) and B(electrofusion of group A) were significantly lower than that of control group(p<0.01). 3. When nuclear transplanted embryos were submitted to electrofusion, the significantly higher fusion rates of 2-cell donor nuclei were achieved at the electric field strength of DC 1.5kV/cm for 100 and $150{\mu}$ sec, DC 2.0 kV/cm for $100{\sim}200{\mu}$ sec than DC 1.0 kV/cm for 100 and $150{\mu}$ sec(p<0.01). The significantly higher fusion rates of 4-cell donor nuclei were achieved at DC 2.0 kV/cm for 100 and $150{\mu}$ sec than DC 1.0kV/cm for $100{\sim}200{\mu}$ sec(p<0.01). These fusion rates in 8-cell donor nuclei were 88.7~99.3%. 4. The developmental potency to blastocyst in 2- and 4-cell donor nuclei was significantly higher in DC 1.0 and 2.0 kV/cm for $100{\sim}200{\mu}$ sec treated group and DC 2.0 kV/cm for 150 and $200{\mu}$ sec treated group (p<0.01). The developmental potency to blastocyst in 8-cell donor nuclei was significantly higher in DC 2.0 kV/cm for $100{\mu}$ sec treated group than in DC 1.0 kV/cm for $100{\mu}$ sec treated group and DC 2.0 kV/cm for 150 and $200{\mu}$ sec treated group(p<001). 5. The developmental potency to blastocyst after nuclear transplantation was significantly higher in 2-cell donor nuclei than in 8-cell donor nuclei(p<0.01). 6. The success rate of nuclear injection into enucleated 2-cell embryos was significantly higher in 2-cell donor nuclei than in 4- or 8-cell donor nuclei(p<0.01). 7. The culture time taken for the nuclear transplanted 2-cell embryos to blastocyst stage was significantly longer in 2-cell donor nuclei than in 8-cell donor nuclei(p<0.01). 8. There was no significant difference in the developmental potency of nuclear transplanted embryos within the concentration of EGF at 0 to 15 ng per $m{\ell}$ of BMOC-3 solution. 9. The production rates of offspring after transfer of nuclear transplanted embryos to recipient mouse were significantly higher in 2-cell donor nuclei than in 8-cell donor nuclei(p<0.01).

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.17 no.5
• /
• pp.1-16
• /
• 2022

Although start-up is a key national strategy to increase national competitiveness and create employment, the survival rate of start-ups has not improved significantly. This is an important reason for the inability to provide timely and appropriate support to startups, which are in the early stages of start-up, due to the unique limitations of existing start-up support institutions and investors. The relatively recent accelerator is attracting attention as a subject of solving the above problems through professional incubation and investment. However, there are only a few empirical studies on investment determinants that affect the survival and success of accelerators, and there is a lack of theoretical evidence. Accordingly, in previous studies, 12 investment determinants were derived from a static, strategic, and dynamic perspective as accelerator investment determinants based on a business model innovation framework. This study subdivided the accelerator investment determinants derived through previous studies into 21 and analyzed the importance and priority of each factor using AHP (Analytic Hierarchy Process) analysis technique for domestic accelerator investment experts. As a result of the analysis, the top factors of importance of accelerator investment determinants were in the order of 'human resources', 'customer and market', 'intellectual resources', and 'entrepreneur's ability to realize opportunities'. It can be seen that the accelerator considers the core competencies of startups to implement solutions as the most important factor when making startup investment decisions. It was also confirmed that accelerators are strategic to create a clear value proposition and differentiated market position based on the core competitiveness of startups, and that the core value delivery method prefers a market-oriented business model and recognizes entrepreneurs's innovation capability is an important factor to realize a business model with limited resources in a rapidly changing market. This study is of academic significance in that it analyzes the importance and priority of accelerator investment determinants through demonstration as a follow-up study on accelerator investment determinants derived based on business model innovation theory that reflects the nature, goals, and major activities of accelerator investment. In addition, it is of practical value as it contributes to revitalizing the domestic startup investment ecosystem by providing accelerators with theoretical grounds for investment decisions and specific information on detailed investment determinants.

• Korean Journal of Environmental Biology
• /
• v.21 no.2
• /
• pp.149-157
• /
• 2003

This study focused on relationships between Pb and Cd concentrations and the difference of success reproductive progress in urban (Seoul) and industrial complex (Ansan) areas. Results of the Pb analysis for the feral pigeons from Seoul (egg contents:1.64 $\mu\textrm{g}$ wet $g^{-1}$, adults in bones: 29.5 $\mu\textrm{g}$ wet $g^{-1}$ and the Ansan industrial complex (egg contents: 1.13 $\mu\textrm{g}$ wet $g^{-1}$, adults in bones: 10.5 $\mu\textrm{g}$ wet g-1) showed that the Pb level of eggs and adults is significantly different between the two colonies (p<0.05). Cd concentrations in liver and kidneys of adult pigeons were also significantly different between Seoul(liver: 0.24 ${\mu}g$ wet $g^{-1}$, kidney: 1.05 $\mu\textrm{g}$ wet $g^{-1}$ and the Ansan (liver: 0.14 $\mu\textrm{g}$ wet $g^{-1}$, kidney: 0.43 $\mu\textrm{g}$ wet $g^{-1}$ colonies (P<0.05). Clutch size of Feral Pigeons living in Seoul was similar between the two colonies, 1.9$\pm$0.3 in Seoul and 2.0$\pm$0.0 in Ansan. The length, breadth, and thickness of eggs were not significantly different between the two colonies (p>0.05). Incubation period in Seoul (17.8 days) did not differ from the Ansan (17.4 days). No difference in growth rate (body weight, wing length, and tarsus length) was found between the two test groups (p>0.05). In Seoul, 65.2% were hatching, and 42.1% fledging. The Proportion of hatching and fledging in the Ansan was 60.7% and 45.0%, respectively. The significant differences between the two colonies for reproductive sucess were not found (p>0.05). With regard to the reproductive effects to the heavy metals, the Pb and Cd concentrations feund in the two colonies were not as high as those considered in results of toxic effects in other species.

• Neonatal Medicine
• /
• v.18 no.1
• /
• pp.137-142
• /
• 2011

Purpose: In relation to perinatal healthcare, medical institutions and resources are limitative and also are in a state of flux due to the therapeutic specialty. We analyzed requests for interhospital transfers received by Busan 1339 Emergency Medical Information Center (EMIC) to grasp the state of perinatal healthcare delivery system. Methods: This study was conducted on the basis of data inputted into the computing system of Busan 1339 EMIC, between January 1 and December 31, 2009. In connection with 378 pregnant women and 136 newborns who were required to transfer, retrospective analyses were made of the success rate of transfer (SR), the number of contacted hospitals, the time required for transfer and the reason of transfer and refusal. Results: In the case of pregnant women, the SR were 65.5%. They came in contact with 2.7 hospitals, and it took 24.4 minutes. As for the reason of transfer, preterm labor accounted for the highest proportion. In the case of newborns, the SR were 71.3%. They came in contact with 2.4 hospitals, and it took 15.6 minutes. The most common reason of transfer were respiratory symptoms. In the reason of refusal with pregnant women and newborn, the lack of medical staff, medical equipments and wards accounted for great. Conclusion: Many pregnant women and newborns have been transferred to hospitals by EMIC, but the SR has not been higher yet. Accordingly, there is a need to evaluate the propriety of perinatal treatment system, as well as to set up effective perinatal healthcare delivery system.