• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.04a
• /
• pp.395-400
• /
• 2002

Epoxy coating and sealing used in nuclear plants for the protection of radiation degrades with aging and hazardous atmosphere. In order to evaluate the degradation of the epoxy, dependence of the acoustic impedance on the change of mechanical properties has been used. Unlike metals, the surface of the epoxy coating on a concrete liner is so wavy that the acoustic impedance is difficult to measure by using the reflectivity of the ultrasound on the interface surface because of the irregular reflection and propagation from the epoxy surface. SA(simulated annealing) algorithm is applied to calculate the acoustic impedance using a reflection wave from the rough epoxy surface. The surface waviness and acoustic impedance are taken into account and determined by SA method to evaluate the state of degradation quantitatively.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.316-321
• /
• 2001

The optical storage device has recently experienced significant improvement, especially for the aspects of high capacity and fast transfer rate. However, it is necessary to study a new shape of air bearing surface for the rotary type actuator because the optical storage device has the lower access time than that of HDD (Hard Disk Drives). In this study, we proposed the air bearing shape by using SA (Simulated Annealing) algorithm which is very effective to achieve the global optimum instead of many local optimums. The objective of optimization is to minimize the deviation in flying height from a target value 100nm. In addition, the pitch and roll angle should be maintained within the operation limits.

• Journal of Korean Institute of Industrial Engineers
• /
• v.32 no.2
• /
• pp.98-103
• /
• 2006

In this research, the single machine capacitated lot-sizing and scheduling problem with sequence- dependent setup costs and setup times (CLSPSD) is considered. This problem is the extension of capacitated lot-sizing and scheduling problem (CLSP) with an additional assumption on sequence-dependent setup costs and setup times. The objective of the problem is minimizing the sum of production costs, inventory holding costs and setup costs satisfying customers' demands. It is known that the CLSPSD is NP-hard. In this paper, the MIP formulation is presented. To handle the problem more efficiently, a conceptual model is suggested, and one of the well-known meta-heuristics, the simulated annealing approach is applied. To illustrate the performance of this approach, various instances are tested and the results of this algorithm are compared with those of the CLPEX. Computational results show that this approach generates optimal or nearly optimal solutions.

• Journal of the Optical Society of Korea
• /
• v.13 no.1
• /
• pp.92-97
• /
• 2009

In this paper, a conventional simulated annealing (SA) method for optimization of a kinoform computer generated hologram (CGH) is analyzed and the SA method is modified to reduce a reconstruction error rate (ER) of the CGH. The dependences of the quantization level of the hologram pattern and the size of the data on the ER are analyzed. To overcome saturation of the ER, the conventional SA method is modified as it magnifies a Fourier-transformed pattern in the intermediate step. The proposed method can achieve a small ER less than 1%, which is impossible in the conventional SA method.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.52 no.2
• /
• pp.120-127
• /
• 2003

In electrical impedance tomography(EIT), various image reconstruction algorithms have been used in order to compute the internal resistivity distribution of the unknown object with its electric potential data at the boundary. Mathematically the EIT image reconstruction algorithm is a nonlinear ill-posed inverse problem. This paper presents a simulated annealing technique as a statistical reconstruction algorithm for the solution of the static EIT inverse problem. Computer simulations with the 32 channels synthetic data show that the spatial resolution of reconstructed images by the proposed scheme is improved as compared to that of the mNR algorithm or genetic algorithm at the expense of increased computational burden.

• Journal of Korean Society for Quality Management
• /
• v.24 no.4
• /
• pp.59-69
• /
• 1996

The criteria for construction of D-optimal design in nonlinear models are derived. The procedures for finding these optimal designs using the simulated annealing algorithm are presented. It is claimed that the advantages of this method are its ability to make the given data useful by adding new observations as well as to obtain a new set of appropriate data when the model and parameters are known. Research so far indicates that there has never been a case in which there is more than one independent variable but this method can be used for such cases. The result indicates the effectiveness of the method using simulated annealing algorithm for situations in which there are many independent variables and the ranges of design spaces are wide.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.21 no.2
• /
• pp.125-140
• /
• 1996

Simulated annealing (SA) is a very promising general purpose algorithm which can be conveniently utilized for various complicated combinatorial optimization problems. But its slowness has been pointed as a major drawback. In this paper, we propose an accelerated SA and test its performance experimentally by applying it for two standard combinatorial optimization problems (TSP(Travelling Salesman Problem) and GPP(Graph Partitioning Problem) of various sizes. It turns out that performance of the proposed method is consistently better both in convergenge speed and the quality of solution than the conventional SA or SE (Stochastic Evolution). In the second part of the paper we apply the accelerated SA to solve the virtual path management problem encountered in ATM netowrks. The problem is modeled as a combinatorial optimization problem to optimize the utilizy of links and an efficient SA implementation scheme is proposed. Two application examples are given to demonstrate the validity of the proposed algorithm.

• Journal of Industrial Technology
• /
• v.28 no.B
• /
• pp.9-14
• /
• 2008

In the Reporting Cell Location Management (RCLM) system, a subset of cells in the network is designated as the reporting cells. Each mobile terminal performs location update only when it enters one of these reporting cells. When a call arrives, the paging is confined to the reporting cell the user last reported and the neighboring bounded non-reporting cells. Frequent location update may result in degradation of quality of service due to interference. Miss on the location of a mobile terminal will necessitate a search operation on the network when a call comes in. We must decide the number of reporting cells and which cell should be reporting cell to balance the registration (location update) and search (paging) operations to minimize the cost of RCLM system. This paper proposes a simulated annealing (SA) for optimization of RCLM system.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.4 no.3
• /
• pp.259-265
• /
• 2004

In this study, a hybrid genetic algorithm merged with simulated annealing is presented to solve nonlinear channel blind equalization problems. The equalization of nonlinear channels is more complicated one, but it is of more practical use in real world environments. The proposed hybrid genetic algorithm with simulated annealing is used to estimate the output states of nonlinear channel, based on the Bayesian likelihood fitness function, instead of the channel parameters. By using the desired channel states derived from these estimated output states of the nonlinear channel, the Bayesian equalizer is implemented to reconstruct transmitted symbols. In the simulations, binary signals are generated at random with Gaussian noise. The performance of the proposed method is compared with those of a conventional genetic algorithm(GA) and a simplex GA. In particular, we observe a relatively high accuracy and fast convergence of the method.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.50 no.1
• /
• pp.28-37
• /
• 2001

This paper presents an efficient algorithm for the loss minimization of distribution system by automatic sectionalizing switch operation in large scale distribution systems. Simulated annealing is particularly well suited for large combinational optimization problem, but the use of this algorithm is also responsible for an excessive computation time requirement. Tabu search attempts to determine a better solution in the manner of a greatest-descent algorithm, but it can not give any guarantee for the convergence property. The hybrid algorithm of two methods with two tabu lists and the proposed perturbation mechanism is applied to improve the computation time and convergence property Numerical examples demonstrate the validity and effectiveness of the proposed methodology using a KEPCO's distribution system.