• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.29 no.6
• /
• pp.527-537
• /
• 2007

To evaluate criteria, indications, and prognosis of the various reconstructive methods on the patients with intraoral soft tissue defect who had been treated at Dept. of Oral and Maxillofacial Surgery, Pusan National University Hospital from 2003 to 2005, we have reviewed the clinical data of the patients and analysed. The results were as follows: 1. Tongue flaps have been mainly applied on anterior portion of palate and maxilla. The survival rate was high percent, but the cooperation of patient was inevitable for the success. 2. Palatal mucosa rotational flaps were available on relative large defect on palate, oroantral fistula site. The side effect was a scaring band from secondary healing on denuded donor palate site. Sometimes the band came to be a hinderance to swallowing, phonation. 3. Forearm free flap was a workhorse flap for everywhere in intraoral defects. We had used the flap on cheek, floor of mouth, tongue without any significant complications. But the application of the flap was required for long operation time, which was disadvantageous to the old, weak patients. 4. Cervical platysmal flap could be easily applicable for buccal cheek, floor of mouth after excision of the cancer lesion. The design of the flap could be made simultaneously on neck dissection, but the danger of cancer remnants on the flap always might be remained. 5. Buccal fat pad pedicled flap must have been a primary flap for repair of oroantral fistula especially on posterior maxilla. The flap survival will be expected if the considerations for above reconstructive methods on site, size, condition of defects primarily could be made.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.717-722
• /
• 2016

In this paper, in order to support the peak current limiting function depending on the intensity of the fault current at the early stage of failure, a two magnetically coupled type superconducting fault current limiter (SFCL) is proposed, which includes high-Tc superconducting (HTSC) element 1, where the existing primary and secondary coils are connected to one iron core in parallel, and HTSC element 2, which is connected to the tertiary winding using an additional iron core. The results of the experiments in this study confirmed that the two magnetic coupling type SFCL having coil 1 and coil 2 connected in parallel using dual iron cores is capable of having only HTSC element 1 support the burden of the peak current when a failure occurs. The reason for this is that although HTSC element 1 was quenched and malfunctioned because the instantaneous factor of the initial fault current was large, the current flowing to coil 3 did not exceed the critical current, which would otherwise cause HTSC element 2 to be quenched and not function. In order to limit the peak current upon fault through the sequential HTSC elements, the design should allow it to have the same value as the low value of coil 1 while having coil 3 possess a higher self-inductance value than coil 2. In addition, a short-circuit simulation experiment was conducted to examine and validate the current limiting and recovery characteristics of the SFCL when the winding ratio between coil 1 and coil 2 was 0.25. Through the analysis of the short-circuit tests, the current limiting and recovery characteristics in the case of the additive polarity winding was confirmed to be superior to that of the subtractive polarity winding.

• Journal of Navigation and Port Research
• /
• v.28 no.10 s.96
• /
• pp.947-953
• /
• 2004

As a large scale port development in coastal waters proceeds step by step and populations in the vicinity of port are getting increased, the issue on 'how to dispose the treated municipal water and wastewater in harbor' brings peoples' concern. The submarine outfall system discharges the primary or secondary treated effluent at the coastline or in deep water, or between these two. The effluent, which has a density similar to that of fresh water, rises to the sea surface forming plume or jet, together with entraining the surrounding sea water and becomes very dilute. We intended in this paper to investigate the impact on dilution of effluent and the behavior of flume under the conditions of the seasonal and spatial temperature variations, which have not been noticeable in designing effective marine outfall system. To predict and analyze the behaviour and dilution characteristics of plume not just with the effluent temperature, but also with the seasonal variation of temperature of surround water, CORMIX( Cornell Mixing Zone Expert System)-GI have been applied. The results should be used with caution in evaluation the mixing zone characteristics of discharged water. We hope to help for the effective operation of outfall system, probable outfall design, protection of water quality, and warm water discharges from a power plant, etc.

• Journal of the Korean association of regional geographers
• /
• v.14 no.6
• /
• pp.664-679
• /
• 2008

This paper attempts to evaluate the local economy and the local economic development policy in Goryeong County and to propose some policy alternatives for local economic development. Goryeong County has a locational advantage, which is not just geographically proximate to Daegu, a large metropolis, but also connected directly to the national highway networks. This region can also be regarded as a rural area, in a sense that the primary industry still plays a more important role for the local economy than the secondary industry and the tertiary industry. However, it is problematic that the local economic development strategies of Goryeong are universal rather than strategic and systematic. In order to design an effective regional economic development policy, the policy makers are necessary to deliberately consider regional specificity and geo-political and geo-economic situations around the region. In addition, it is important to say that policy makers, particularly in rural regions, need to break from the fantasy of high-tech industries. In this context, I propose some region-specific and context-specific policy ideas, including the promotion of the agro-food cluster and the build-up of the em-industrial complexes specialized in mechatronics and transportation equipment manufacturing.

• Korean Journal of Acupuncture
• /
• v.31 no.1
• /
• pp.33-39
• /
• 2014

Objectives : This study was designed to evaluate the feasibility of further acupuncture research as an effective and safe treatment for reducing cancer-related upper abdominal pain in patients treated with Neurolytic celiac plexus block(NCPB). Methods : This study is a randomized controlled pilot clinical trial of 3-week duration. Fourteen patients will be recruited and randomly allocated to 2 groups: an acupuncture plus NCPB group(experimental group) and a NCPB group(control group). All patients will undergo one session of NCPB, but only the experimental group will receive three acupuncture sessions a week for 2 weeks(6 in total). The primary outcome will be measured using the visual analogue scale, and the secondary outcome will be measured using the Painvision system and the consumption of additional analgesics. Assessments will be made at baseline and at 1, 2, and 3 weeks thereafter(that is, the 3-week assessment will be made 1 week after treatment cessation). Conclusions : This clinical trial will inform the design of a full-scale trial. The outcomes will provide information to facilitate the incorporation of acupuncture into existing pain management methods such as NCPB in the treatment of cancer-related upper abdominal pain patients.

• The Journal of Korean Medicine
• /
• v.43 no.2
• /
• pp.61-74
• /
• 2022

Objectives: This study aimed to explore the short-term effects of bilateral masticatory training using an intraoral device on memory and concentration, which is an advanced form of Gochi, compared to the unilateral form with gum. Methods: Thirty young healthy participants (age, 16-30 years) were screened and randomly assigned to one of two sequences in a crossover design. The participants assigned to sequence A (n=15) performed bilateral mastication using an intraoral device with a total of 300 taps, followed by unilateral mastication using gum with the same number of repetitions and frequency, separated by a 7-day washout period. A reverse order was used for sequence B. The primary and secondary outcomes were the digit span test result and the symbol digit modality test and the word list recall results, respectively, which were conducted before and after each intervention. Results: Symbol digit modality test scores increased by 12.03±8.33 with bilateral mastication, which was significantly higher than that obtained with chewing gum (5.17 points;95% confidence interval: 0.99, 9.34; p<0.05). Changes in the digit span test and word list recall scores were not significantly different between the two groups. In the digit span test forward, symbol digit modality test, and word list recall test, bilateral mastication was not inferior to unilateral mastication in improving memory and concentration. Conclusions: Bilateral masticatory exercises using an intraoral device are not inferior to unilateral mastication with gum for improving memory in healthy young individuals. Further research is needed to determine the efficacy of bilateral masticatory training on cognitive function.

• Journal of Practical Engineering Education
• /
• v.14 no.3
• /
• pp.505-512
• /
• 2022

The purpose of this study is to synthesize effects of the living lab-based education through meta-analysis. Seven primary studies reporting the effect of living lab-based education were carefully selected for data analysis. Research questions are as follows. First, what is the overall effect size of the living lab-based education? The overall effect size refers to the effect on the cognitive and affective domains. Second, what is the effect size of the living lab-based education according to categorical variables? Categorical variables are outcome characteristics, study characteristics, and design characteristics. Results are summarized as follows. First, the overall effect size of living lab-based education was 0.347. Second, the effect size according to the cognitive domain was 1.244 for information process, 0.593 for communication, 0.261 for problem solving, and 0.26 for creativity. Third, the effect size according to subject area was shown in the order of electrical and electronic engineering 1.146, technology and home economics 0.489, artificial intelligence 0.379, and practical arts 0.168. Fourth, the effect size according to school level was 1.058 for high school, 0.312 for middle school, and 0.217 for elementary school. Fifth, the effect size by grade level was 0.295 when two or more grades were integrated and 0.294 for a single grade.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.745-755
• /
• 2017

University campuses try to satisfy students' demands. Therefore, the physical environment of university campuses keeps changing. Due to the increasing the number of students and shortage of school building facilities, it is necessary to improve the facilities and create new space in the campus, in order to solve this problem and improve the universities. At the moment, the learning method of university students is evolving toward discussion sessions involving fellow students and presentations utilizing multimedia facilities. In response to these changes, a new type of independent space has appeared, which is called the Group Study Room. In this study, we analyze the spatial characteristics of the Group Study Room. Also, through an IPA(Importance Performance Analysis), this study tries to examine the relationship between the spatial characteristics and users' satisfaction. This analysis is expected to reveal the importance of the spatial characteristics of the group study rooms from the users' point of view. This research can be used for facility planning in universities in the future. The primary aim of this study is to analyze the physical environment of the Group Study Rooms of K university. The secondary aim of this study is to manifest the characteristics of these new learning spaces and to check the space elements of the group study rooms for the sake of efficient planning and management.

• Journal of Korean Medicine for Obesity Research
• /
• v.20 no.2
• /
• pp.138-148
• /
• 2020

Objectives: The aim of this study is to evaluate the effects of Bangpungtongseong-san (Fangfengtongsheng-san, BTS) and Daesiho-tang (Dachaihu-tang, DST) on weight loss and improvement in lipid metabolism and glucose metabolism. Furthermore, we intend to develop a prediction model for drug effects through the analysis of the single nucleotide polymorphism (SNP), gut-microbiota, and the expression of immune-related biomarkers. Methods: This study is a single-center, randomized, double-blind, parallel-design clinical trial. One hundred twenty-eight participants will be assigned to the BTS group (n=64) and DST group (n=64). Both groups will be administered 4 g medication three times a day for up to 2 weeks. The primary outcomes is weight loss. The secondary outcomes include bioelectrical impedance analysis, waist circumstance, body mass index, total cholesterol, high-density lipoprotein, triglyceride, insulin resistance. The exploratory outcomes include 3-day dietary recall, food frequency questionnaire, quality of life questionnaire, gut microbiota analysis, immune biomarkers analysis, and SNP analysis. Assessment will be made at baseline and at week 4, 8, and 12. Conclusions: This protocol will be implemented by approval of the Institutional Review Board of Dongguk University. The results of this trial will provide a systematic evidence for the treatment of obesity and enable more precise herbal medicine prescriptions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.570-575
• /
• 2019

Active muffler is implemented by applying active noise control technique to reduce exhaust noise of automobile muffler. Conventional Filtered_x LMS algorithm has a problem that the degree of control filter becomes very large and convergence deteriorates when acoustic feedback is present. The recursive LMS algorithm can compensate for this problem because it can be easily diverted in the adaptive filter adaptation process. In this paper, the structure of the primary path and the secondary path transfer function is designed as the IIR filter to improve the convergence performance and the computational burden, and the stabilization filter algorithm is applied to secure stability which is a disadvantage of the IIR filter structure. The stabilization filter algorithm plays a role of pulling the pole into the unit circle to prevent the pole of the transfer function corresponding to the acoustic feedback from diverging during the adaptation process. In this way, the computational burden of the active muffler system and the convergence performance can be improved. In order to show the usefulness of the proposed system, we compared the performance of the proposed Filtered_x LMS algorithm with the performance of the proposed system for the exhaust sound of a diesel engine, which is a variable environment. Compared to conventional algorithm, proposed algorithm's computational burden is less than half, and convergence performances are more than 4 times.