• Journal of Korea Society of Industrial Information Systems
• /
• v.22 no.6
• /
• pp.47-59
• /
• 2017

Korean Economy has been developed by the Korean Government's Support for the Large-sized Firms. This Government Policy causes the Polarization between Large-sized and Micro-sized Firms Aggravated. Micro-sized Firms are distributed over the Whole Industry Area, and can also cause the Economic Crisis If They are crashed down. Therefore Government Policy for the Micro-sized Manufacturing Industry is very Important Issue. This Paper Focused on the Analysis of Current Status for the Shoes Micro Manufacturing Industry. For the Effective Analysis, This Paper uses the Statistical Data Open to the Public and also conducts the Survey for the Micro-sized Firms in Busan. Statistical Program is used for Analyzing the Collected Data and the Major Findings are as Follows. First, Shoes Industry is led by the Micro and Small & Medium sized Firms rather than the Large-sized. And the Micro-sized Firms are getting the High Rate among the Whole Shoes Industry. Busan is heavily populated Area as the Origin of Shoes Industry. Second, even though Most of the Owner of the Micro-sized Firms have the High Technology Skill Level, Worker's Aging Phenomenon gets Worse and causes the Technology Handing down to the Next Generation Difficult. Third, Because the Factory Facility of the Micro-sized Firms is Dirt and Unstable, the Modernized Manufacturing Infrastructure such as the Apartment Factory Facility is Necessary. Forth, as the Micro-sized Firms which have the Intangible Asset such as Patent is Few, the Government Policy for Encouraging the Patent Application is strongly Needed. Fifth, Entrepreneurship and Collaboration Mind between Micro-sized Firms are Lacked, so Establishment of the Cooperative Union is required. Finally, the Effort for the Systemic Planning for the Management is lacked, and the Introduction of the Management Innovation is strongly needed. The Limitation and Future Research Direction is also discussed.

• Journal of Intelligence and Information Systems
• /
• v.25 no.3
• /
• pp.19-41
• /
• 2019

According to the rapidly increasing demand for text data analysis, research and investment in text mining are being actively conducted not only in academia but also in various industries. Text mining is generally conducted in two steps. In the first step, the text of the collected document is tokenized and structured to convert the original document into a computer-readable form. In the second step, tasks such as document classification, clustering, and topic modeling are conducted according to the purpose of analysis. Until recently, text mining-related studies have been focused on the application of the second steps, such as document classification, clustering, and topic modeling. However, with the discovery that the text structuring process substantially influences the quality of the analysis results, various embedding methods have actively been studied to improve the quality of analysis results by preserving the meaning of words and documents in the process of representing text data as vectors. Unlike structured data, which can be directly applied to a variety of operations and traditional analysis techniques, Unstructured text should be preceded by a structuring task that transforms the original document into a form that the computer can understand before analysis. It is called "Embedding" that arbitrary objects are mapped to a specific dimension space while maintaining algebraic properties for structuring the text data. Recently, attempts have been made to embed not only words but also sentences, paragraphs, and entire documents in various aspects. Particularly, with the demand for analysis of document embedding increases rapidly, many algorithms have been developed to support it. Among them, doc2Vec which extends word2Vec and embeds each document into one vector is most widely used. However, the traditional document embedding method represented by doc2Vec generates a vector for each document using the whole corpus included in the document. This causes a limit that the document vector is affected by not only core words but also miscellaneous words. Additionally, the traditional document embedding schemes usually map each document into a single corresponding vector. Therefore, it is difficult to represent a complex document with multiple subjects into a single vector accurately using the traditional approach. In this paper, we propose a new multi-vector document embedding method to overcome these limitations of the traditional document embedding methods. This study targets documents that explicitly separate body content and keywords. In the case of a document without keywords, this method can be applied after extract keywords through various analysis methods. However, since this is not the core subject of the proposed method, we introduce the process of applying the proposed method to documents that predefine keywords in the text. The proposed method consists of (1) Parsing, (2) Word Embedding, (3) Keyword Vector Extraction, (4) Keyword Clustering, and (5) Multiple-Vector Generation. The specific process is as follows. all text in a document is tokenized and each token is represented as a vector having N-dimensional real value through word embedding. After that, to overcome the limitations of the traditional document embedding method that is affected by not only the core word but also the miscellaneous words, vectors corresponding to the keywords of each document are extracted and make up sets of keyword vector for each document. Next, clustering is conducted on a set of keywords for each document to identify multiple subjects included in the document. Finally, a Multi-vector is generated from vectors of keywords constituting each cluster. The experiments for 3.147 academic papers revealed that the single vector-based traditional approach cannot properly map complex documents because of interference among subjects in each vector. With the proposed multi-vector based method, we ascertained that complex documents can be vectorized more accurately by eliminating the interference among subjects.

• Asia pacific journal of information systems
• /
• v.17 no.2
• /
• pp.97-122
• /
• 2007

Conventional networking and telecommunications infrastructure characterized by wires, fixed location, and inflexibility is giving way to mobile technologies. Numerous research reports point to the ultimate domination of wireless communication. With the increasing prevalence of advanced cell-phones, various mobile data services (hereafter MDS) are gaining popularity. Although cellular networks were originally introduced for voice communications, statistics indicate that data services are replacing the matured voice service as the growth engine for telecom service providers. For example, SK Telecom, the Korea's largest mobile service provider, reported that 25.6% of revenue and 28.5% of profit came from MDS in 2006 and the share is growing. Statistics also indicate that, in 2006, the average revenue per user (ARPU) for voice didn't change but MDS grew seven percents from the previous year, further highlighting its growth potential. MDS is defined "as an assortment of digital data services that can be accessed using a mobile device over a wide geographic area." A variety of MDS have been deployed, with a few reaching the status of killer applications. Many of them need to access the Internet through the cellular-phone infrastructure. In the past, when the cellular network didn't have acceptable bandwidth for data services, SMS (short messaging service) dominated MDS. Now, Internet-ready, next-generation cell-phones are driving rich digital data services into the fabric of everyday life, These include news on various topics, Internet search, mapping and location-based information, mobile banking and gaming, downloading (i.e., screen savers), multimedia streaming, and various communication services (i.e., email, short messaging, messenger, and chaffing). The huge economic stake MDS has on its stakeholders warrants focused research to understand associated dynamics behind its adoption. Lyytinen and Yoo(2002) pointed out the limitation of traditional adoption models in explaining the rapid diffusion of innovations such as P2P or mobile services. Also, despite the increasing popularity of MDS, unexpected drop in its usage is observed among some people. Intrigued by these observations, an exploratory study was conducted to examine decision factors of MDS usage. Data analysis revealed that the increase and decrease of MDS use was influenced by different forces. The findings of the exploratory study triggered our confirmatory research effort to validate the uni-directionality of studied factors in affecting MDS usage. This differs from extant studies of IS/IT adoption that are largely grounded on the assumption of bi-directionality of explanatory variables in determining the level of dependent variables (i.e., user satisfaction, service usage). The research goal is, therefore, to examine if increase and decrease in the usage of MDS are explained by two separate groups of variables pertaining to information quality and system quality. For this, we investigate following research questions: (1) Does the information quality of MDS increase service usage?; (2) Does the system quality of MDS decrease service usage?; and (3) Does user motivation for subscribing MDS moderate the effect information and system quality have on service usage? The research questions and subsequent analysis are grounded on the two factor theory pioneered by Hertzberg et al(1959). To answer the research questions, in the first, an exploratory study based on 378 survey responses was conducted to learn about important decision factors of MDS usage. It revealed discrepancy between the influencing forces of usage increase and those of usage decrease. Based on the findings from the exploratory study and the two-factor theory, we postulated information quality as the motivator and system quality as the de-motivator (or hygiene) of MDS. Then, a confirmative study was undertaken on their respective role in encouraging and discouraging the usage of mobile data service.

• Korean Journal of Heritage: History & Science
• /
• v.48 no.3
• /
• pp.186-203
• /
• 2015

This article attempts to examine both the outcome and future task of the art history research on Central Eurasia, better known under the name of "Silk Road". The term Central Eurasia encompasses Xinjiang Uygur, Tibet, Mongolia, former Soviet Republics, the northwest region of India, Iran and Turkey. The article analyzes the 30-year history of the region's art history research and further presents a desirable direction that the study should move towards. Though short in its research period, the ROK's art history study on Central Eurasia has shown eye-catching achievement in several areas such as the northwest region of India and the Xinjiang Uygur, Dunhwang of China. Two factors allowed for this accomplishment. First was the actual improvement of the work environment, where the scholars were finally able to travel to Central Eurasia and explore the historic sites for themselves since 1990. More important was the 'arena of study' for the next-generation scholars made possible by institutions like The Korean Association for Central Asian Studies and the Center for Central Eurasian Studies. Slowly but consistently, the two academic societies induced scholars' attention towards the field and fostered new experts. Circumstances changed, marking 2012 as the starting point. International academic forums held by the government branches surged in number. The intention behind it was to link the ROK with the Silk Road and ultimately to obtain the "Eurasia initiative". As of now, the public has shown heightened interest in the issue. The academia is subsequently riding on this second "wave of interest" following the first wave in the 1980s. However, increased popularity comes with some negative consequences, and this art history research on Central Eurasia is no exception. There are criticisms regarding the objectivity of recent academic forums. Some argue that the aim of the forums are sternly set most of the times, prohibiting the presenters to voice their own perspectives. Still, this heated attention will definitely play its role as a stepping stone for further development. The academia should commit to fostering rising researchers who will systemically and professionally study the field. This is imperative in order for the Korean culture to successfully communicate with the world and take itself to a new level. Without completing this task, the ROK's art history research on Central Eurasia is likely to remain idle.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.100-101
• /
• 2012

The plasma damage free and room temperature processedthin film deposition technology is essential for realization of various next generation organic microelectronic devices such as flexible AMOLED display, flexible OLED lighting, and organic photovoltaic cells because characteristics of fragile organic materials in the plasma process and low glass transition temperatures (Tg) of polymer substrate. In case of directly deposition of metal oxide thin films (including transparent conductive oxide (TCO) and amorphous oxide semiconductor (AOS)) on the organic layers, plasma damages against to the organic materials is fatal. This damage is believed to be originated mainly from high energy energetic particles during the sputtering process such as negative oxygen ions, reflected neutrals by reflection of plasma background gas at the target surface, sputtered atoms, bulk plasma ions, and secondary electrons. To solve this problem, we developed the NBAS (Neutral Beam Assisted Sputtering) process as a plasma damage free and room temperature processed sputtering technology. As a result, electro-optical properties of NBAS processed ITO thin film showed resistivity of $4.0{\times}10^{-4}{\Omega}{\cdot}m$ and high transmittance (>90% at 550 nm) with nano- crystalline structure at room temperature process. Furthermore, in the experiment result of directly deposition of TCO top anode on the inverted structure OLED cell, it is verified that NBAS TCO deposition process does not damages to the underlying organic layers. In case of deposition of transparent conductive oxide (TCO) thin film on the plastic polymer substrate, the room temperature processed sputtering coating of high quality TCO thin film is required. During the sputtering process with higher density plasma, the energetic particles contribute self supplying of activation & crystallization energy without any additional heating and post-annealing and forminga high quality TCO thin film. However, negative oxygen ions which generated from sputteringtarget surface by electron attachment are accelerated to high energy by induced cathode self-bias. Thus the high energy negative oxygen ions can lead to critical physical bombardment damages to forming oxide thin film and this effect does not recover in room temperature process without post thermal annealing. To salve the inherent limitation of plasma sputtering, we have been developed the Magnetic Field Shielded Sputtering (MFSS) process as the high quality oxide thin film deposition process at room temperature. The MFSS process is effectively eliminate or suppress the negative oxygen ions bombardment damage by the plasma limiter which composed permanent magnet array. As a result, electro-optical properties of MFSS processed ITO thin film (resistivity $3.9{\times}10^{-4}{\Omega}{\cdot}cm$, transmittance 95% at 550 nm) have approachedthose of a high temperature DC magnetron sputtering (DMS) ITO thin film were. Also, AOS (a-IGZO) TFTs fabricated by MFSS process without higher temperature post annealing showed very comparable electrical performance with those by DMS process with $400^{\circ}C$ post annealing. They are important to note that the bombardment of a negative oxygen ion which is accelerated by dc self-bias during rf sputtering could degrade the electrical performance of ITO electrodes and a-IGZO TFTs. Finally, we found that reduction of damage from the high energy negative oxygen ions bombardment drives improvement of crystalline structure in the ITO thin film and suppression of the sub-gab states in a-IGZO semiconductor thin film. For realization of organic flexible electronic devices based on plastic substrates, gas barrier coatings are required to prevent the permeation of water and oxygen because organic materials are highly susceptible to water and oxygen. In particular, high efficiency flexible AMOLEDs needs an extremely low water vapor transition rate (WVTR) of $1{\times}10^{-6}gm^{-2}day^{-1}$. The key factor in high quality inorganic gas barrier formation for achieving the very low WVTR required (under ${\sim}10^{-6}gm^{-2}day^{-1}$) is the suppression of nano-sized defect sites and gas diffusion pathways among the grain boundaries. For formation of high quality single inorganic gas barrier layer, we developed high density nano-structured Al2O3 single gas barrier layer usinga NBAS process. The NBAS process can continuously change crystalline structures from an amorphous phase to a nano- crystalline phase with various grain sizes in a single inorganic thin film. As a result, the water vapor transmission rates (WVTR) of the NBAS processed $Al_2O_3$ gas barrier film have improved order of magnitude compared with that of conventional $Al_2O_3$ layers made by the RF magnetron sputteringprocess under the same sputtering conditions; the WVTR of the NBAS processed $Al_2O_3$ gas barrier film was about $5{\times}10^{-6}g/m^2/day$ by just single layer.

• Archives of design research
• /
• v.16 no.4
• /
• pp.185-196
• /
• 2003

The demand for an environment-friendly transportation system, equipped with low energy consumption, and low-or zero-pollution has been on the increase since the beginning of the World Trade Organization era. Simultaneously, the consistent growth of high-speed tram technology, combined with market share, has sparked a fierce competition among technologically-advanced countries like France, Germany, and Japan in an effort to keep the lead in high-speed train technology via extensive Research and development(R＆D) expenses. These countries are leaders in the race to implement the next-generation transportation system, build intercontinental rail way networks and export the high-speed train as a major industry commodity. The need to develop our own(Korean) 'high-speed train' technology and its core system technology layouts including original technology serves a few objectives: They boost the national competitive edge; they develop an environmental friendly rail road system that can cope with globalization and minimize the social and economic losses created by the growing traffic-congested delivery costs, environment pollution, and public discomforts. In turn, the 'G7 Project-Development of High Speed Railway Technology' held between 1996 and 2002 for a six-year period was focused on designing a domestic train capable of traveling at a speed of 350km/h combined and led to the actual implementation of engineering and producing the '2000 high-speed train:' This paper summarizes and introduces one of the G7 Projects-specifically, the design segment achievement within the development of train system engineering technology. It is true that the design aspect of the Korean domestic railway system program as a whole was lacking when compared with the advanced railroad countries whose early phase of train design emphasized the design aspect. However, having allowed the active participation of expert designers in the early phase of train design in the current project has led to a new era of domestic train development and the implementation of a way to meet demand flexibly with newly designed trains. The idea of a high-speed train in Korea and its design concept is well-conceived: a faster, more pleasant, and silent based Korean high-speed train that facilitates a new travel culture. A Korean-type of high-speed train is acknowledged by passengers who travel in such trains. The Korean high-speed prototype train has been born, combining aerodynamic air-cushioned design, which is the embodiment of Korean original design of forehead of power car minimized aerodynamic resistance using a curved car body profile, and the improvement of the interior design with ergonomics and the accommodation of the vestibule area through the study of passenger behavior and social culture that is based on the general passenger car.

• Journal of Digital Contents Society
• /
• v.13 no.2
• /
• pp.225-233
• /
• 2012

The 3D stereoscopic image contents have been emerging as the blue chip of the contents market of the next generation since the . However, all the 3D contents created commercially in the country have failed to enter box office. It is because the quality of Korean 3D contents is much lower than that of overseas contents and also current 3D post production process is based on 2D. Considering all these facts, the 3D editing process has connection with the quality of contents. The current 3D editing processes of the production case of are using the way that edits with the system on basis of 2D, followed by checking with 3D display system and modifying, if there are any problems. In order to improve those conditions, I suggest that the 3D editing process contain more objectivity by visualizing the depth data applied in some composition work such as Disparity map, Depth map, and the current 3D editing process. The proposed process has been used in the music drama , comparing with those of the film . The 3D values could be checked among cuts which have been changed a lot since those of , while the 3D value of drew an equal result in general. Since the current process is based on an artist's subjective sense of 3D, it could be changed according to the condition and state of the artist. Furthermore, it is impossible for us to predict the positive range, so it is apprehended that the cubic effect of space might be perverted by showing each different 3D value according to cuts in the same space or a limited space. On the other hand, the objective 3D editing by applying the visualization of depth data can adjust itself to the cubic effect of the same space and the whole content equally, which will enrich the 3D contents. It will even be able to solve some problems such as distortion of cubic effect and visual fatigue, etc.

• Journal of Christian Education in Korea
• /
• v.71
• /
• pp.277-303
• /
• 2022

The COVID-19 Pandemic, which began in 2020, has led to many changes in the Korean church. It created a situation in which not only the change and form of worship time, but also the definition, direction, and philosophy of ministry had to be re-established. In the early days of COVID-19 Pandemic, the Korean church recognized this as a crisis, but gradually regarded these as opportunities and tried to produce positive results. The Department of Education has also undergone many changes, especially in its summer ministry, and is expected to have undergone more dramatic changes in form, location and method than in any other church event or service. However, no accurate data on this has been collected. Accordingly, Mirae with Dreams (CEO: Pastor Kim Eun-ho), a corporation established by the Oryun Church for the next generation of ministry, conducted a survey on the summer ministry of the Korean church, which has been registered as a future member with dreams every year since 2020 when the COVID-19 fan dummy began. A similar survey was conducted in 2022 following 2021, and 260 churches responded, and the results are as follows. In 2022, the summer ministry of the Ministry of Education of the Korean Church returned to the form before the COVID-19 Pandemic. Unlike 2021, when many of them were held online, more than 81 percent said they had conducted summer camps offline, and 31 percent also conducted or attended outdoor camps. In terms of the importance of roles, when online was also the main focus, parents and teachers were equally viewed or emphasized, while in this summer's survey, 90 percent of respondents said that the role of teachers in charge or department was important. Summer events were mainly summer Bible schools and retreats, but 25% of all respondents said they conducted missionary work and evangelism at home and abroad. Compared to 2021, participation in summer camps has increased in all departments, including infant and kindergarten, elementary and middle school, and especially in infant and middle school. While preparing for the summer camp, most of the respondents said that the focus was on content and topics, and the main focus was on children's accessibility compared to 2021. As a result of synthesizing the description of the reason for the respondents who could not conduct the summer camp, about 40% said they could not conduct the summer camp due to a lack of volunteers. This is more than 30% who pointed out COVID-19 as the cause, which can be seen as an urgent problem to be solved at the Korean church and denomination level. In addition, this paper also mentioned detailed changes in each question, referring to the changes in summer camps from 2020 to 2022.

• Journal of the Korean earth science society
• /
• v.35 no.7
• /
• pp.562-571
• /
• 2014

In the celebration of the $50^{th}$ anniversary of the Korean Earth Science Society, the whole articles published in Journal of the Korean Earth Science Society (JKESS) were quantitatively analyzed. JKESS has played a major role in exchanging academically among earth science education specialists and in educating next generation for the last 36 years since it was founded in 1979. The total number of 1544 articles in thirty five volumes about the earth sciences and the earth science pedagogy has been published by August, 2014, and the number of the yearly published articles has been increasing. Regarding the research area, 69.3% was published in earth sciences and the other 30.7% was in earth science education; the percentage of research articles in geology, atmospheric science, environmental science, oceanography, and astronomy was 55.2, 17.6, 16.0, 6.0, and 5.2%, respectively. The number of research articles on atmospheric science and environmental science has recently been increasing, whereas, earth science education research articles have been" decreasing, which was similar to the pattern seen fifteen years ago. We thought that one of the reasons was related to a new journal named, "Journal of the Korean Society of Earth Science Education" started to publish in December, 2008. The number of articles authored or co-authored with foreigner scholars was totaled 53, which is only 3.4% of the entire number of published articles. It suggests that international advertisement via public relations as well as the development of English homepage be necessary. In order to become an excellent registered academic journal, it is the time to comprehensively discuss how to improve both the quality growth and the quantity of JKESS. According to the Ministry of Education, it is now in its planning stage to convert the current registration system of the academic journals to the autonomous evaluation system in academia. Therefore, we recommend that Journal of the Korean Earth Science Society be prepared for the upcoming future change.

• Journal of Intelligence and Information Systems
• /
• v.17 no.2
• /
• pp.39-60
• /
• 2011

Since the introduction of web 2.0 technology, social network service has been recognized as the foundation of an important future information technology. The advent of web 2.0 has led to the change of content creators. In the existing web, content creators are service providers, whereas they have changed into service users in the recent web. Users share experiences with other users improving contents quality, thereby it has increased the importance of social network. As a result, diverse forms of social network service have been emerged from relations and experiences of users. Social network is a network to construct and express social relations among people who share interests and activities. Today's social network service has not merely confined itself to showing user interactions, but it has also developed into a level in which content generation and evaluation are interacting with each other. As the volume of contents generated from social network service and the number of connections between users have drastically increased, the social network extraction method becomes more complicated. Consequently the following problems for the social network extraction arise. First problem lies in insufficiency of representational power of object in the social network. Second problem is incapability of expressional power in the diverse connections among users. Third problem is the difficulty of creating dynamic change in the social network due to change in user interests. And lastly, lack of method capable of integrating and processing data efficiently in the heterogeneous distributed computing environment. The first and last problems can be solved by using FOAF, a tool for describing ontology-based user profiles for construction of social network. However, solving second and third problems require a novel technology to reflect dynamic change of user interests and relations. In this paper, we propose a novel method to overcome the above problems of existing social network extraction method by applying FOAF (a tool for describing user profiles) and RSS (a literary web work publishing mechanism) to OLAP system in order to dynamically innovate and manage FOAF. We employed data interoperability which is an important characteristic of FOAF in this paper. Next we used RSS to reflect such changes as time flow and user interests. RSS, a tool for literary web work, provides standard vocabulary for distribution at web sites and contents in the form of RDF/XML. In this paper, we collect personal information and relations of users by utilizing FOAF. We also collect user contents by utilizing RSS. Finally, collected data is inserted into the database by star schema. The system we proposed in this paper generates OLAP cube using data in the database. 'Dynamic FOAF Management Algorithm' processes generated OLAP cube. Dynamic FOAF Management Algorithm consists of two functions: one is find_id_interest() and the other is find_relation (). Find_id_interest() is used to extract user interests during the input period, and find-relation() extracts users matching user interests. Finally, the proposed system reconstructs FOAF by reflecting extracted relationships and interests of users. For the justification of the suggested idea, we showed the implemented result together with its analysis. We used C# language and MS-SQL database, and input FOAF and RSS as data collected from livejournal.com. The implemented result shows that foaf : interest of users has reached an average of 19 percent increase for four weeks. In proportion to the increased foaf : interest change, the number of foaf : knows of users has grown an average of 9 percent for four weeks. As we use FOAF and RSS as basic data which have a wide support in web 2.0 and social network service, we have a definite advantage in utilizing user data distributed in the diverse web sites and services regardless of language and types of computer. By using suggested method in this paper, we can provide better services coping with the rapid change of user interests with the automatic application of FOAF.