• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.5
• /
• pp.1-8
• /
• 2017

Recently, with the development of ICT technology such as cloud and mobile, image utilization through social networks is increasing rapidly. These images contain personal information, and personal information leakage accidents may occur. As a result, studies are underway to recognize and mask personal information in images. However, optical character recognition, which recognizes personal information in images, varies greatly depending on brightness, contrast, and distortion, and Korean recognition is insufficient. Therefore, in this paper, we design and implement a personal information identification and masking system based on image recognition through deep learning application using CNN algorithm based on optical character recognition method. Also, the proposed system and optical character recognition compares and evaluates the recognition rate of personal information on the same image and measures the face recognition rate of the proposed system. Test results show that the recognition rate of personal information in the proposed system is 32.7% higher than that of optical character recognition and the face recognition rate is 86.6%.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.1
• /
• pp.79-86
• /
• 2020

In this paper, we analyzed the case vulnerable to the power analysis attack of the ARIA algorithm and AES algorithm. Through this, we propose an algorithm with a safe structure for power analysis and prove through experiment. The proposed technique is a masking method using LFSR with a cyclic structure. To verify this, 1000, 2000, and 4000 power traces were collected, and the corresponding results are shown and proved. We used ATmega328 Chip for Arduino Uno for the experiment and mounted each algorithm. In order to measure the power consumption, a resistor was inserted and then proceeded. The analysis results show that the proposed structure has a safe structure for power analysis. In the future, we will study ways to lead to performance enhancement.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.6
• /
• pp.698-703
• /
• 2003

This paper presents analog secure communication system about safe speech transmission using chaotic signals. We applied various conditions that happen in actuality communication environment modifying chaotic synchronization and chaotic communication schemes and analyzed restoration performance of speech signal to computer simulation. In transmitter, we made the chaotic masking signal which is added voice signal to chaotic signal using PC(Pecora ＆ Carroll) and SFB(self-feedback) control techniques and transmitted encryption signal to noisy communication channel And in order to calculate the degree of restoration performance, we proposed the definition of analog average power of recovered error signals in receiver chaotic system. The simulation results show that feedback control techniques can certify that restoration performance is superior to quantitative data than PC method about masking degree, susceptibility of parameters and channel noise. We experimentally computed the table of relation of parameter fluxion to restoration error rate which is applied the encryption key values to the chaotic secure communication.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.25 no.4
• /
• pp.739-747
• /
• 2015

Masking technique that is most widely known as countermeasure against power analysis attack prevents leakage for sensitive information during the implementations of cryptography algorithm. it have been studied extensively until now applied on block cipher algorithms. Masking countermeasure have been applied to international standard SEED algorithm. Masked SEED algorithm proposed by Cho et al, not only protects against first order power analysis attacks but also efficient by reducing the execution of Arithmetic to Boolean converting function. In this paper, we analyze the vulnerability of Cho's algorithm against first order power analysis attacks. We targeted additional pre-computation to improve the efficiency in order to recover the random mask value being exploited in first order power analysis attacks. We describe weakness by considering both theoretical and practical aspects and are expecting to apply on every device equipped with cho's algorithm using the proposed attack method.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.9 no.3
• /
• pp.39-52
• /
• 1999

In this paper we propose a new watermarking technique for copyright protection of images. The proposed technique is based on a spatial masking method with a spatial scale parameter. In general it becomes more robust against various attacks but with some degradations on the image quality as the amplitude of the watermark increases. On the other hand it becomes perceptually more invisible but more vulnerable to various attacks as the amplitude of the watermark decreases. Thus it is quite complex to decide the compromise between the robustness of watermark and its visibility. We note that watermarking using the spread spectrum is not robust enought. That is there may be some areas in the image that are tolerable to strong watermark signals. However large smooth areas may not be strong enough. Thus in order to enhance the invisibility of watermarked image for those areas the spatial masking characteristics of the HVS(Human Visual System) should be exploited. That is for texture regions the magnitude of the watermark can be large whereas for those smooth regions the magnitude of the watermark can be small. As a result the proposed watermarking algorithm is intend to satisfy both the robustness of watermark and the quality of the image. The experimental results show that the proposed algorithm is robust to image deformations(such as compression adding noise image scaling clipping and collusion attack).

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.3
• /
• pp.48-55
• /
• 2001

A novel method to reduce additive non-stationary noise is proposed. The method requires neither the information about noise nor the estimate of the noise statistics from any pause regions. The enhancement is performed on a band-by-band basis for each time frame. Based on both the decision on whether a particular band in a frame is speech or noise dominant and the masking property of the human auditory system, an appropriate amount of noise is reduced using spectral subtraction. The proposed method was tested on various noisy conditions (car noise, Fl6 noise, white Gaussian noise, pink noise, tank noise and babble noise) and on the basis of comparing segmental SNR with spectral subtraction method and visually inspecting the enhanced spectrograms and listening to the enhanced speech, the method was able to effectively reduce various noise while minimizing distortion to speech.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.3 s.303
• /
• pp.91-98
• /
• 2005

In this paper, we propose a temporal error concealment method based on the edge adaptive masking. In the method, four regions around the corrupted block - top, bottom, left, and right - are defined and the edge features of the regions are extracted by applying an edge operator for each direction. The size of a mask for the boundary matching is determined by the edge information, which can be considered as a criterion to measure the activity of the boundary region. In other words, it is determined such that the size of the mask is proportional to the amount of edge-component extracted from each region in order to yield the higher reliability on boundary matching. This process is equivalent to applying weights depending on the edge features, which leads the improved motion vector. In experiments, it is verified that the proposed method outperforms the conventional methods in terms of image quality, and then its merits and demerits are discussed.

• Journal of Korea Multimedia Society
• /
• v.22 no.5
• /
• pp.558-572
• /
• 2019

Anthropomorphism is the attribution of human traits, emotions, or intentions to non-human entities. Anthropomorphic animal face masking is the process by which human characteristics are plotted on the animal kind. In this research, we are proposing a compact system which finds the resemblance between a human face and animal face using Deep Convolutional Neural Network (DCNN) and later applies morphism between them. The whole process is done by firstly finding which animal most resembles the particular human face through a DCNN based animal face classification. And secondly, doing triangulation based morphing between the particular human face and the most resembled animal face. Compared to the conventional manual Control Point Selection system using an animator, we are proposing a Viola-Jones algorithm based Control Point selection process which detects facial features for the human face and takes the Control Points automatically. To initiate our approach, we built our own dataset containing ten thousand animal faces and a fourteen layer DCNN. The simulation results firstly demonstrate that the accuracy of our proposed DCNN architecture outperforms the related methods for the animal face classification. Secondly, the proposed morphing method manages to complete the morphing process with less deformation and without any human assistance.

• Transactions of Materials Processing
• /
• v.12 no.7
• /
• pp.640-646
• /
• 2003

The nanoprobe based on lithography, mainly represented by SPM based technologies, has been recognized as potential application to fabricate the surface nanostructures because of its operational versatility and simplicity. The objective of the work is to suggest new mastless pattern fabrication technique using the combination of machining by nanoindenter and KOH wet etching. The scratch option of the nanoindenter is a very promising method for obtaining nanometer scale features on a large size specimen because it has a very wide working area and load range. Sample line patterns were machined on a silicon surface, which has a native oxide on it, by constant load scratch (CLS) of the Nanoindenter with a Berkovich diamond tip, and they were etched in KOH solutions to investigate chemical characteristics of the machined silicon surface. After the etching process, the convex structure was made because of masking effect of the affected layer generated by nano-scratch. On the basis of this fact, some line patterns with convex structures were fabricated. Achieved patterns can be used as a mold that will be used for mass production processes such as nanoimprint or PDMS molding process. All morphological data of scratch traces were scanned using atomic force microscope (AFM).

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.2
• /
• pp.233-239
• /
• 1998

SiC thin films were deposited by chemical vapor deposition method using tetramethylsilane (TMS) and hexamethyldisilane (HMDS). The chamber pressure during the deposition was kept at about 1 torr. Precursor was transported to the reaction chamber by $H_2$gas and SiC deposition was carried out at the reaction temperature of $1200^{\circ}C$. Si-wafer masked with tantalum and MgO single crystal covered with platinum and molybdenum were used as substrates. The selectivity of SiC deposition was observed by comparing the microstructure between metal (Ta, Pt, and Mo) surfaces and substrate surfaces (Si and MgO). The deposited films were identified as the $\beta-SiC$ phase by X-ray diffraction pattern. Also, the deposition -behavior of SiC on each surface was investigated by the scanning electron microscope analysis.