• 방사성폐기물학회지
• /
• 제19권1호
• /
• pp.61-74
• /
• 2021

A paradigm shift in the government's energy policy was reflected in its declaration of early closure of old nuclear plants as well as cancellation of plans for the construction of new plants. To this end, unit 1 of Kori Nuclear Power Plant was permanently shut down and is set for decommission. Based on these changes, the off-site transport of spent fuels from nuclear power plants has become a critical issue. The purpose of this study is to develop an optimized method for transportation of spent fuels from Kori Nuclear Power Plant's units 1, 2, 3, and 4 to an assumed interim storage facility by simulating the scenarios using the Flexsim software, which is widely used in logistics and manufacturing applications. The results of the simulation suggest that the optimized transport methods may contribute to the development of delivery schedule of spent fuels in the near future. Furthermore, these methods can be applied to decommissioning plan of nuclear power plants.

• Journal of Plant Biology
• /
• 제23권1호
• /
• pp.3-10
• /
• 1980

Effects of thermal effluents on the marine algal communities were investigated with the quadrat method during June, 1977-December, 1978, at the intertidal zone of Kori Nuclear Power Plant, Southeast Coast of Korea. As a result, both the number of algal species occurred in quadrat (50$\times$50cm) and the total coverage were observed to be decreased in June, 1978, at three sites near the discharge point compared with those of previous year but being recovered afterwards. The representative dominant species at the coast of Kori Nuclear Power Plant were, on the whole, Corallina pilulifera, Pachymeniopsis elliptica, and Chondrus ocellatus. Among the species, the coverage of Corallina pilulifera appeared to be rather increased, while the vegetation of Chondria crassicaulis was found to be decreased particularly in 1978. Total 102 species (3 blue-green, 16 green, 30 brown, and 53 red algae) of marine algae were identified in this study. Among them 71 species were common to 133 species reported by previous investigators during 1969-1970.

• Corrosion Science and Technology
• /
• 제22권3호
• /
• pp.214-219
• /
• 2023

Considering the case in the United States where most nuclear power plants with an initial design life of 40 years continue to operate until 60 or 80 years after undergoing material soundness evaluation, it is time to plan a more robust long-term operation strategy for nuclear power plants in Korea. There are some reports that SRO/LRO might be formed when Alloy 690 is heat treated for 10,000 hours to 100,000 hours at 360 to 450 ℃. The possibility of LRO formation in Alloy 690 steam generator tubings of Kori nuclear power plant unit 1 (Kori-1) was investigated using existing research papers. The mechanism in which SRO/LRO occurred was also surveyed. Alloy 690 was found to be more likely to cause ordering than Alloy 600 in terms of alloy composition. The ordering could be evaluated through changes in material properties. However, it is difficult to evaluate it from a microstructural point of view. The likelihood of LRO in Alloy 690 of the Kori-1 plant operated at 320 ℃ for 19 years seemed to be low in terms of time and exposure temperature.

• Nuclear Engineering and Technology
• /
• 제54권7호
• /
• pp.2519-2528
• /
• 2022

The child pick-up behavior of parents during an emergency can cause heavy traffic congestion and failing to evacuate an affected area successfully. In this study, we analyzed the effect of child pick-up behavior using, as an example, a nuclear power plant accident caused by an earthquake, which is a typical no-notice emergency. A quake was assumed to occur near the Shin-Kori nuclear power plant in Ulsan, Korea, resulting in a nuclear power plant accident. An agent-based dynamic simulation model using VISSIM was employed to conduct sensitivity analyses with different child pick-up rates. The results confirmed that parents are a major cause of congestion and a vulnerable class in an emergency evacuation. The child pick-up behavior caused significant traffic congestion, and parents who pick up their children showed a higher evacuation failure rate.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2005년도 춘계학술발표회
• /
• pp.1329-1330
• /
• 2005

• Nuclear Engineering and Technology
• /
• 제51권4호
• /
• pp.1098-1108
• /
• 2019

Korea's first commercial nuclear power plant at Kori site was permanently shut down in 2017 and is currently in transition stage. Preparatory activities for decommissioning such as historical site assessment, characterization, and dismantling design are being actively carried out for successful D&D (Dismantling and Decontamination) at Kori site. The ultimate goal of decommissioning will be to ensure the safety of workers and residents that may arise during the decommissioning of nuclear facilities and, thereby finally returning the site to its original status in accordance with the release criteria. Upon completion of decommissioning, the resident's safety at a site released will be assessed from the evaluation of dose caused by radionuclides expected to be present or detected at the site. Although the U.S. commercial nuclear power plants with decommissioning experience use different site release criteria, most of them are 0.25 mSv/y. In Korea, both the unrestricted and restricted release criteria have been set to 0.1 mSv/y by the Nuclear Safety and Security Commission. However, since the dose is difficult to measure, measurable concentration guideline levels for residual radionuclides that result in dose equivalent to the site release criteria should be derived. For this derivation, site reuse scenario, selection of potential radionuclides, and systematic methodology should be developed in planning stage of Kori site decommissioning. In this paper, for calculation of a preliminary site-specific Derived Concentration Guideline Levels (DCGLs) for the Nuclear Power Plant site, a novel approach has been developed which can fully reflect practical reuse plans of the Kori site by taking into account multiple site reuse scenarios sequentially, thereby striking a remarkable distinction with conventional approaches which considers only a single site scenario.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2004년도 춘계학술대회 논문집
• /
• pp.101-108
• /
• 2004

KEPRI has developed an Nuclear Steam Supply System(NSSS) thermal-hydraulics simulation program (called ARTS-KORI), based on the best-estimate system code, RETRAN, as a part of the development project for the KORI unit 1 Nuclear Power Plant Simulator. A number of code modifications, such as simplifications and removing of discontinuities of the physical correlations, were made in order to change the RETRAN code as an nuclear Steam Supply System thermal-hydraulics engine in the simulator. Some simplified models and a backup system were also developed. This paper briefly presents the results of non-integrated standalone test of ARTS-KORI.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2004년도 추계학술발표회 발표논문집
• /
• pp.273-274
• /
• 2004

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2001년도 춘계학술발표회요약집
• /
• pp.354-354
• /
• 2001

• 방사성폐기물학회지
• /
• 제19권1호
• /
• pp.51-58
• /
• 2021

Chemical decontamination of primary systems in a nuclear power plant (NPP) prior to commencing the main decommissioning activities is required to reduce radiation exposure during its process. The entire process is repeated until the desired decontamination factor is obtained. To achieve improved decontamination factors over a shorter time with fewer cycles, the appropriate flow characteristics are required. In addition, to prepare an operating procedure that is adaptable to various conditions and situations, the transient analysis results would be required for operator action and system impact assessment. In this study, the flow characteristics in the steady-state and transient conditions for the chemical decontamination operations of the Kori-1 NPP were analyzed and compared via the MARS-KS code simulation. Loss of residual heat removal (RHR) and steam generator tube rupture (SGTR) simulations were conducted for the postulated abnormal events. Loss of RHR results showed the reactor coolant system (RCS) temperature increase, which can damage the reactor coolant pump (RCP)s by its cavitation. The SGTR results indicated a void formation in the RCS interior by the decrease in pressurizer (PZR) pressure, which can cause surface exposure and tripping of the RCPs unless proper actions are taken before the required pressure limit is achieved.