• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.3
• /
• pp.277-284
• /
• 1998

This experiment was carried out to study the effects of lactic acid bacteria (LAB) inoculation and addition of cell wall degrading enzymes on the fermentation characteristics and chemical compositions of Italian ryegrass silage. An inoculant LAB with or without a cell wall degrading enzyme of Acremoniumcellulase (A), or Meicellulase (M) or a mixture of both (AM), was applied to 1 kg of fresh Italian ryegrass sample. The treatments were control untreated, LAB-treated (application rate $10^5$ cfu/g fresh sample), LAB+A 0.005%, LAB + A 0.01%, LAB+A 0.02%, LAB + M 0.005%, LAB + M 0.01%, LAB + M 0.02%, LAB+AM 0.005%, LAB + AM 0.01% and LAB+AM 0.02%. The sample was ensiled into 2-L vinyl bottle silo, with 9 silages of each treatment were made (a total of 99 silages). Three silages of each treatment were incubated at 20, 30 and $40{^{\circ}C}$ for an approximately 2-months storage period. All silages were well preserved as evidenced by their low pH values (3.79-4.20) and high lactic acid concentrations (7.71-11.34% DM). The fermentation quality and chemical composition of the control untreated and the LAB-treated silages were similar, except that for volatile basic nitrogen (VBN) content was lower (p < 0.05) in the LAB-treated silages. LAB + cellulase treatments improved the fermentation quality of silages by decreasing (p < 0.01) pH values and increasing (p<0.01) lactic acid concentrations, in all of cellulase types and incubation temperatures. Increasing amount of cellulase addition resulted in further decrease (p < 0.01) of pH value and increases (p < 0.01) of lactic acid and residual water soluble carbohydrate (WSC) concentrations. LAB + cellulase treatments reduced (p<0.01) NDF, ADF, hemicellulose and cellulose contents of silages compared with both the control untreated and LAB-treated silages. LAB + cellulase treatments did not affect the silage digestibility due to fact of in vitro dry matter digestibility (IVDMD) was similar in all silages. The silages treated with cellulase A resulted in a better fermentation quality and a higher rate of cell wall reduction losses than those of the silages treated with cellulases M and AM. Incubation temperature of $30{^{\circ}C}$ seemed to be more suitable for the fermentation of Italian ryegrass silages than those of 20 and $40{^{\circ}C}$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.265-270
• /
• 2019

In order to protect the advancement of defense technology that has a tremendous e?ect on both the national security and the economy, the Republic of Korea established the Defense Technology Security Act in 2015. As the new enactment brought changes to the landscape of the defense industry and defense industrial security, a new examination of the concept of the defense industrial security has now become necessary. Even after taking into consideration the undisclosed nature of defense industrial security research, and the fact that only the limited number of firms participates in the subject matter, scientific studies related to the topic have not been active. However, with the new enactment of the Defense Technology Security Act, it is necessary to expand the scope of security and to redefine the concept of defense industrial security. In this paper, we analyzed the research works on related technology protection policies and our environment of the defense industry in order to conceptualize defense industrial security. The established concepts are expected to provide a systematic way to protect the confidential and defense technology.

• Journal of International Area Studies (JIAS)
• /
• v.22 no.1
• /
• pp.67-90
• /
• 2018

France has allowed a deprivation of nationality for terrorism since 1996 Law. After then, a series of law revision (1998, 2006 law and 2010, 2015-2015 reform tries) have not only linked an act of terror with nationality deprivation but also put the dual national and their deprivation at the centre of dispute. Both 2010 Immigration Law by Sarkozy and 2015-2016 constitutional amendment by Hollande had been not adopted but have combined immigrants and security issue together by firmly solidifying the relationship between dual national and terrorist. Especially in 2015-2016, the constitutional amendment that failed to be adopted has extended a state of emergency and left the nationality deprivation of dual national as controversial issue. After over 4 months of discussion, the amendment that contains a clause of a state of emergency and extension plan for nationality deprivation was abolished but the dual national issues which had been non-politicized has now become politicized, defined as security issues and finally securitized. It shows very two-stage process of securitization argued by Copenhagen school including Buzan. The importance of securitization notion by Copenhagen school lies on the fact that it scrutinizes the constructive elements of the process of securitization. The concept of securitization allows us to see the problem of the process that defines a non-politicized issue as security one by making it political matter. Applying this process of securitization into the controversy of nationality deprivation of dual nationals in France, we can find out the development of non-controversial and non-politicized dual national issues into social agenda by politicization through speech-act or announcement effect.

• Journal of Korean Society of Archives and Records Management
• /
• v.6 no.1
• /
• pp.113-136
• /
• 2006

This study aims for the above mentioned. After all, through the analysis of Electronic Question/Answering Function to understand a user's demand under online circumstances, groping for the method to provide an appropriate Archival Information Service is the most important thing. For this, in this study, it researched the users interviews and the research related to users as a precedence study, and the studies having examined the state of demanding information by users through analyzing the e-mail actually. Additionally, by looking over the study of Library and Information Science that is activated in a field of Electronic Question/Answering Function rather than Archival Science, as a matter of fact, the study has come up with the standard for analyzing Electronic Question/Answering Function. And based on the precedence study, the instances for the National Archives from USA, England, Australia and Canada were analyzed, and the chance of activating Archival Information Service were tried to grope for in the study. This study might be one of methodologies in examining the users study that is not activated yet in Archival Science. Therefore, the users study can be carried out in various methods as well as Electronic Archives/Answering Service. This study might be the important information in providing far better Archival Information Services. It is desirable that based on this opportunity, the study related to the various users by examining not only Electronic Archives/Answering Function but also Question/Answering of the users and the Archivists in the filed to the larger extend will be activated for Archival Science.

• Korean Journal of Materials Research
• /
• v.14 no.12
• /
• pp.893-899
• /
• 2004

Even though Ti-6Al-4V has gained popularity as an implant material, the possible dissolution of Al and V ions in body fluids remains a matter of concern. Though commercially pure Ti (Cp-Ti) overcomes this problem, the mechanical strength of pure titanium remains very low. Thus, in this experiment Cp-Ti was processed by Equal channel angular processing (ECAP), in order to increase the mechanical strength. The biocompatibility of ECAP-Ti, Cp-Ti and Ti-6Al-4V was examined by the apatite formation on each sample surface, after treating the surface with 5M NaOH and soaking in Simulated body fluids (SBF). Initially, the samples were mechanically polished on silicone carbide paper (#2000). The polished samples were treated with 5M NaOH solution at $60^{\circ}C$ for 24 hours. The NaOH treated samples were washed gently with distill water and dried at $40^{\circ}C$ for 1 day. The dried samples were heat treated in air at $600^{\circ}C$ for 1 hour. The surface morphology of these samples were studied using SEM and XRD. The SEM studies showed network of pores in all samples. The XRD showed oxide layer formation on Cp-Ti and Ti-6Al-4V. samples. However the oxide layer in ECAP-Ti was not substantial. These samples were immersed in SBF, kept at $36.5^{\circ}C$ for seven days period. At the end of 7 days, the apatite formation was confirmed only on Cp-Ti and was not observed in Ti-6Al-4V and ECAP-Ti. These observations of apatite formation relate to the fact that Cp-Ti showed greater oxide layer than other samples. The apatite examined was confirmed as tricalcium phosphate (TCP) using EDS and XRD.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.2
• /
• pp.123-130
• /
• 2018

Storytelling is a compound of two words, 'story' and 'telling'. While the static aspect of 'story' has been emphasized, the dynamic and specific aspect of telling has been ignored. So, in the argument of 'storytelling', it is necessary to break from talking about 'story' and discuss the matter in terms of 'telling' and 'interaction'. In order to accept this need, the term 'Traditional Storytelling' is coined to engage 'oral-storytelling situation' more actively. When 'storytelling' is expressed by a storyteller, it can be referred to 'traditional storytelling', called 'oral performance'. In fact, the storytelling, which has a long history, originated from oral storytelling such as 'oral narration'. It is natural that our current storytelling isn't the same storytelling of an oral period, but the traditional storytelling casts a few crucial viewpoints to us these days when 'telling' has a significant meaning. In the first place, it is 'reflexivity' that we should note in the form of traditional 'storytelling'. It is a kind of self-reference which means reflecting and looking back at oneself in the form of narration. Through this reflexivity, the storytelling is affected by the site of telling and an aspect of one-off thing very frequently. Another point we need to note is a frame. Through this frame, the traditional storytelling come to hold time and space of narration.

• Proceedings of the Korean Society of Rheology Conference
• /
• 2006.06a
• /
• pp.81-84
• /
• 2006

Slot coating process, in continuous and patch modes, has been applied for the many precise coating products, e.g., flat panel displays and second batteries. However, manufacturing uniform coating products is not a trivial task at high-speed operations because various flow instabilities or defects such as leaking, bubbles, ribbing, and rivulets are frequently observed in this process. It is no wonder, therefore, that many efforts to understand the various aspects of dynamics and coating windows of this process have been made both in academia and industry. In this study, as the first topic, flow dynamics within the coating bead in slot coating process has been investigated using the one-dimensional viscocapillary model by lubrication approximation and two-dimensional model by Flow-3D software. Especially, operability windows in both 1D and 2D cases with various slot die lip designs have been successfully portrayed. Also, effects of process conditions like viscosity and coating gap size on slot coating window have been analyzed. Also, some experiments to find minimum coating thickness and coating windows have been conducted using slot die coater implemented with flow visualization device, corroborating the numerical results. As the second topic, flow dynamics of both Newtonian and Non-Newtonian fluids in patch or pattern slot coating process, which is employed in manufacturing IT products such as secondary batteries, has been investigated for the purpose of optimal process designs. As a matter of fact, the flow control in this system is more difficult than in continuous case because od its transient or time-dependent nature. The internal die and die lip designs for patterned uniform coating products have been obtained by controlling flow behaviors of coating liquids issuing from slot. Numerical simulations have been performed using Fluent and Flow-3D packages. Flow behavior and pressure distribution inside the slot die has been compared with various die internal shapes and geometries. In the coating bead region, efforts to reduce irregular coating defects in head and tail parts of one patterned coating unit have been tried by changing die lip shapes. It has been concluded that optimal die internal design gas been developed, guaranteeing uniform velocity distribution of both Newtonian and shear thinning fluids at the die exit. And also optimal die lip design has been established, providing the longer uniform coating layer thickness within one coating unit.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.21 no.2
• /
• pp.187-202
• /
• 1976

Experiment were conducted to study the photosynthetic ability of several rice varieties and the influence of the drymatter production on the yield components of the rice plant, especially in ripening period. The photosynthetic ability at the ripening period, the varieties were classified into two groups as relatively high capacity and low capacity. With the earlier the transplanting date and the higher the N-content leaf blade, the greater the ratio of reserved assimilates befere heading time to the ear. This could be support the fact that the rate of full-ripened grains or grain yield of 'Tongil' variety may increased by the change of environment condition.condition.

• Journal of Navigation and Port Research
• /
• v.36 no.1
• /
• pp.21-26
• /
• 2012

Recently, vessel hijacking by pirates has been a big issue around the world. For example, the hostages of VLCC "SAMHO Dream" were released for a large sum of ransom. On January 20, 2011 "SAMHO Jewelry" succeeded releasing all of the 21 crews on the vessel by attacking the pirates in international waters for the first time since the founding of the Naval Force. Furthermore, the "HANJIN Tianjin" crews evacuated to the Citadel promptly and were rescued by the navy. As hijacking of Korean vessels by pirates is increasing, various safety measures must be implemented. As a matter of fact, the standard for ship's facilities has been partially revised and setting up an evacuation shelter on all vessels sailing dangerous zone has been reinforced. This research aims to discuss crew Citadel installation on vessels intended for long haul. In addition, it will look at measures against potential gas flow in the event of pirate armed attacks and fire outbreak onboard a vessel. It will also assess the optimal number of crew Citadels theoretically. Lastly, the optimal number of shelters in the event of fire outbreak will be discussed based on an FDS simulation.

• Conservation Science in Museum
• /
• v.16
• /
• pp.4-13
• /
• 2015

In most gold objects crafted using the granulation technique that have been thus far discovered in the Korean Peninsula, granules were joined using a soldering alloy of gold and silver. However, it was recently revealed through SEM-EDS analysis performed on the ornamented dagger sheath from Gyerim-ro Tomb No.14 in Gyeongju that the gold granules were joined to the surface of this sheath using an entirely different technique. The gold granules on the Gyerim-ro dagger sheath are evenly sized and shaped, the surface has a dendritic texture. Dendritic textures are a characteristic feature of metal alloys, not observed in pure metals. As a matter of fact, the gold granules were made of a ternary alloy of 77wt% Au, 18wt% Ag and 4wt% Cu. Due to this component, the alloy has a melting point below 1000℃ (approximately 980℃), which is significantly lower than 1064℃, the melting temperature of pure gold. This makes it possible to join the gold granules directly to the surface of the sheath by briefly heating them to high temperature, without the use of soldering or any other media. When examined through SEM image, the surface of the sheath showed no traces of soldering, it suggests that the granules were joined through unaided fusion.