• The korean journal of orthodontics
• /
• v.29 no.6 s.77
• /
• pp.663-672
• /
• 1999

A case is described, where an adolescent boy developed alopecia areata and alopecia totalis during the course of routine orthodontic treatment for the resolution of a dentoalveolar Class II division 1 malocclusion. The orthodontic treatment lasted 22 months, with a successful outcome. However, within eight months of the onset of treatment the patient lost all his hair Exhaustive medical tests and differential diagnosis determined that the etiolgy of the patient's alopecia was psychological stress evoked by the orthodontic treatment. Numerous reports suggest that psychological stress can cause alopecia by affecting the immune system. Therefore, it appears reasonable to assume that in the case of this patient, alopecia had resulted from stress effects on the immune system, leading to autoimmune disease-like conditions in tissues surrounding the scalp hair follicles. The alopecia condition was successfully reversed by daily oral and topical applications of vitamin D. It is concluded that the immune system plays a pivotal role in tissue remodeling around the teeth and elsewhere in the body, and that any conditions capable of affecting this system may cause unfavorable outcomes, such as alopecia.

• Journal of the Korean Electrochemical Society
• /
• v.12 no.2
• /
• pp.155-161
• /
• 2009

Lithium secondary batteries have been widely used in the portable electric devices as power source. Recently it is expected that the realm of its applications expands to the markets such as energy storage medium of hybrid electric vehicle(HEV), electric vehicle(EV). Cathode active material is crucial in terms of performance, durability, capacity of lithium secondary batteries. It is urgent to develope the technology for mass production of cathode material to cope with the markets' demands in the near future. In this study, a calcination furnace running in real production line is modelled in 3D, and the thermal flow and gas flow after chemical reaction in the furnace is analyzed through numerical computations. Based on the results, it is shown that large volume of $CO_2$ gas is generated from chemical reaction. High concentration of $CO_2$ gas and it's stagnation is clearly found from the reactant containers in which the reaction occur to the bottom area of the furnace. It is also studied that 15% or more $CO_2$ mol fraction could affect to proper formation of $LiCoO_2$ through TGA-DSC analysis. The solutions to evacuate carbon dioxide from the furnace are suggested through the change of furnace design and operating condition as well.

• KIPS Transactions on Computer and Communication Systems
• /
• v.12 no.10
• /
• pp.309-318
• /
• 2023

Recently, each country has been moving to introduce an LCA (Life Cycle Assessment) to regulate greenhouse gas emissions. The LCA is a mean of measuring and evaluating greenhouse gas emissions generated over the entire life cycle of a vehicle. Reliable data for each electric vehicle component is needed to increase the reliability of the LCA results. To this end, studies on life cycle evaluation models using blockchain technology have been conducted. However, in the existing model, key product information is exposed to other participants. And each time parts data information is updated, it must be recorded in the blockchain ledger in the form of a transaction, which is inefficient. In this paper, we proposed a DID(Decentralized Identity)-based data collection model for LCA to collect vehicle component data and verify its validity effectively. The proposed model increases the reliability of the LCA by ensuring the validity and integrity of the collected data and verifying the source of the data. The proposed model guarantees the validity and integrity of collected data. As only user authentication information is shared on the blockchain ledger, the model prevents indiscriminate exposure of data and efficiently verifies and updates the source of data.

• Journal of Environmental Impact Assessment
• /
• v.32 no.5
• /
• pp.318-337
• /
• 2023

This study utilizes system dynamics to examine the effects of fine dust reduction policies on PM10 concentration and health. System dynamics has the advantage of modeling the dynamic and circular relationship between PM₁₀ emission sources, reduction policies, PM₁₀ concentration, and health effect. The study created policy scenarios for Korea's representative fine dust reduction policies - industrial PM₁₀ emission control, diesel vehicle regulation, expansion of electric vehicles, and expansion of parks and green areas - and compared the results with the 2030 baseline if the current trend is maintained. The analysis showed that the policy of supporting electric vehicles reduced PM₁₀ concentration by 0.21 ㎍/m³ and reduced the number of people with circulatory diseases by 494, and the effect was evenly distributed across the country. The industrial emissions regulation scenario resulted in the highest PM₁₀ concentration reduction of 0.22 ㎍/m³, but had a lower reduction in the number of people affected (358) than the EV support strategy, which could be attributed to the fact that this policy had a particularly high PM₁₀ reduction effect in industrial areas such as Danyang-gun, Chungcheongbuk-do, and Sahagu, Busan. As a policy implication, this study suggests that it is necessary to apply fine dust policies tailored to the characteristics of local emission sources.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.23 no.2
• /
• pp.142-156
• /
• 2024

The transition to electric vehicles is a crucial step toward achieving carbon neutrality in the transportation sector. Adequate charging infrastructure at residential locations is essential. In South Korea, the predominant form of housing is multifamily dwellings, necessitating the provision of public charging stations for numerous residents. Although the government mandates the availability of charging facilities and designated parking areas for electric vehicles, it bases the supply of charging stations solely on the number of parking spaces. Slow chargers, mainly 3.5kW charging outlets and 7kW slow chargers, are commonly used. While the former is advantageous for installation and use, its slower charging speed necessitates the coexistence of both types of chargers. This study presents an optimization model that allocates chargers capable of meeting charging demands based on daily driving distances. Furthermore, using the metaheuristic algorithm Tabu Search, this model satisfies the optimization requirements and minimizes the costs associated with charger supply and usage. To conduct a case study, data from personal travel surveys were used to estimate the driving distances, and a hypothetical charging scenario and environment were set up to determine the optimal supply of 22 units of 3.5kW charging outlets for the charging demands of 100 BEVs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.697-702
• /
• 2017

A preliminary study was carried out to investigate the feasibility of replacing honeycomb cores with pyramidal truss cores in the doors of urban transit railway vehicles. The doors in current operation are sandwich structures comprising a honeycomb core and reinforcements between two facesheets. The structural requirements of doors for urban transit vehicle are specified in the KRS and KRT and standards, according to which the deflections from three-point bending tests must be limited. To this end, two types of pyramidal truss cores with equivalent mass to a honeycomb core were designed. The structural stiffness of doors with pyramidal truss cores and honeycomb cores were numerically calculated via finite element analysis. The three-point bending models were constructed and simulated, and then the calculated deflections were compared with the requirements specified in the regulations. The results show that doors with pyramidal truss cores satisfied the stiffness requirements, although their deflections were 2.5% larger than that of the honeycomb cores. Therefore, the pyramidal truss cores could replace the aluminum honeycomb cores, and their multi-functional capability could be exploited.

• Journal of the Korean Electrochemical Society
• /
• v.25 no.4
• /
• pp.184-190
• /
• 2022

Spinel LiMn₂O₄ (LMO) and layered LiNi_0.5Co_0.2Mn_0.3O₂ (NCM) are widely used as positive electrode materials for lithium-ion batteries. LMO and NCM positive electrode materials have a complementary properties. LMO has low cost and high safety and NCM materials show a relatively high specific capacity and better cycle life even at elevated temperature. Therefore, the LMO and NCM active materials are blended and used as a positive electrode in large-size batteries for electric vehicles (xEV). In this study, the cycle performance of a blended electrode prepared by simply mixing LMO and NCM and a bi-layer electrode in which two electrode layers aree sequentially coated are compared. The bi-layer electrode prepared by composing the same ratio of both active materials has similar capacity and cycle performance to the blend electrode. However, the LN electrode coated with LMO first and then NCM is the best in the full cell cycle performance at elevated temperature, and the NL electrode, in which NCM is first coated with LMO has a faster capacity degradation than the blended electrode because LMO is mainly located on the top of the electrode adjacent to electrolyte and graphite negative electrode. Also, the LSTA (linear sweep thermmametry) analysis results show that the LN bi-layer electrode in which the LMO is located inside the electrode has good thermal stability.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.2
• /
• pp.9-14
• /
• 2009

The effects of post-annealing temperature on the optical and electrical properties of P-doped ZnO thin films grown on sapphire substrate have been investigated under oxygen ambient. The XRD shows that regardless of the post-annealing temperature, all P-doped ZnO thin films indicate the c-axis orientation. The results of hall effect measurements indicate the P-doped ZnO thin film annealed at $850^{\circ}C$ exhibits p-type behavior with hole concentration of $1.18{\times}1016cm^{-3}$ and hole mobility of $0.96cm^2/Vs$. The low-temperature (10K) Photoluminescence results reveal that the peak related to the neutral-acceptor exciton (A0X), free electrons to neutral acceptor (FA) and donor acceptor pair (DAP) at 3.351ev, 3.283eV and 3.201eV are observed in the films showing p-type behavior with acceptor. The optimization of deposition and post-annealing conditions will certainly make the P-doped ZnO thin films promising materials for the application to the next generation of optical devices.

• Journal of the Korean Magnetics Society
• /
• v.23 no.2
• /
• pp.49-53
• /
• 2013

A current sensor is one of important component which is used for the electrical current measurement during charge and discharge of the battery, and monitoring system of the motor controller in the electric and hybrid vehicle. In this study, we have developed an open loop type current sensor using GaAs Hall sensor and magnetic core has an air gap. The Hall sensor detect magnetic field produced by the current to be measured. The 3 mm air gap core was made by HGO electrical steel sheets after slitting, winding, annealing, molding, and cutting. Developed current sensor shows 0.03 % linearity within DC current range from -400 A to +400 A. Operating temperature range was extended to the range of $-40{\sim}105^{\circ}C$ using temperature compensating electronic circuit. To Improve frequency bandwidth limit due to the air flux of PCB (Printed Circuit Board) and Hall sensor, We employed an air flux compensating loop near Hall sensor or on PCB. Frequency bandwidth of the sensor was 100 kHz when we applied sine wave current of $40A{\cdot}turn$ in the frequency range from 100 Hz to 100 kHz. For the dynamic response time measurement, 5 kHz square wave current of $40A{\cdot}turn$ was applied to the sensor. Response time was calculated time reach to 90 % of saturation value and smaller than $2{\mu}s$.

• The Journal of the Korea Contents Association
• /
• v.20 no.4
• /
• pp.396-405
• /
• 2020

In this study, we used the big data of Voice of Customer (VOC) related to high-speed Internet products to look at the causes of perceived quality and the possibility of proactive service. In order to verify the possibility of proactive service, we collected VOC data from 13 facilities and equipment of a mobile communication service company, and then conducted 𝒙² test to verify that there was a statistically significant difference between the actual VOC observation values and expected values. We found statistical evidence that proactive service is possible through real-time monitoring for the six disability alarms among the 13 facilities and equipment, which are FTTH-R Equipment ON/OFF, FTTH-EV Line Error Detection, Port Faulty, FTTH-R Line Error Detection, Network Loop Detection, and Abnormal Limiting Traffic. Companies are able to adopt the proactive service to improve their market share and to reduce customer service costs. The results of this study are expected to contribute to the actual application of industry in that it has diagnosed the possibility of proactive service in the telecommunication service sector and further suggested suggestions on how to provide effective proactive service.