• 제목/요약/키워드: The City Structures

검색결과 606건 처리시간 0.03초

Damages of minarets during Erciş and Edremit Earthquakes, 2011 in Turkey

  • Bayraktar, Alemdar;Altunisik, Ahmet Can;Muvafik, Murat
    • Smart Structures and Systems
    • /
    • 제14권3호
    • /
    • pp.479-499
    • /
    • 2014
  • This paper illustrates the damages of reinforced concrete and masonry minarets during October 23 (Erciş) and November 9 (Edremit), 2011 Van earthquakes in Turkey. Erciş and Edremit are townships located 90km and 18km from Van city center in Turkey, respectively. Ground accelerations and response spectrums for these earthquakes are given in this paper. A total of 63 reinforced concrete and masonry minarets are heavily damaged or collapsed in the city center and villages nearby after both earthquakes. Because of the fact that there is no Turkish standard and specification directly related to design of minarets, nearly all of the constructions are carried out by workers using only their own technical knowledge. So, all of the non-engineering reinforced concrete and masonry minarets completely collapsed or damaged heavily. From the study, it is seen that the damages are due to several reasons such as site effect, location, and length of the fault, reduction in cross section and formation of the discontinuity, use of plain reinforcement steel, use of concrete with insufficient strength, existence of short lap splices and incorrect end hook angle, larger mass and stiffness concentrations on some region, longitudinal reinforcements discontinuity, cracks at the cylindrical body, and damage of spire and end ornament. In addition to these reasons, the two earthquakes hit the minarets within seventeen days, causing progressive damage. So, the existing design and construction practices should be improved to provide sufficient earthquake performance. Also, it is recommended that there should be a safe distance between the minaret and surrounding structures to reduce the loose of life after earthquake.

과학영재교육경험이 개인의 성취정도와 진로에서 미치는 영향에 대한 현상학적 탐색 (A Phenomenological Study of the Effects on Achievements and Careers of Secondary Science Gifts Education Experience)

  • 김연희;조갑룡
    • 영재교육연구
    • /
    • 제26권4호
    • /
    • pp.763-786
    • /
    • 2016
  • 본 연구에서는 부산지역 소속의 영재교육원을 수료한 학생들을 대상으로 과학영재교육 경험의 의미를 탐색하여 그 효과성을 보고자 하였다. 본 연구는 2001년부터 2004년까지 과학영역 영재교육원에 입학한 중등영재 7명을 대상으로 영재교육 경험에 대한 면담을 실시하고 Giorgi 분석방법으로 현상학적으로 경험의 의미를 탐색하였다. 분석 결과 과학영재교육경험이 성취면에서 7개 중심의미와 21개의 주제를 도출하였으며, 진로면에서는 5개 중심의미와 11개의 주제를 규명하였다. 영재학생들의 영재교육경험이 성취면과 진로면에서 긍정적인 효과가 나타난 것으로 분석된다. 학생들의 영재교육 경험의 의미를 토대로 앞으로의 영재교육 방향을 설정하는데 시사점을 제공해 줄 수 있을 것으로 기대해 본다.

콘크리트 생애주기 품질관리를 위한 QR 코드 기반 강도 라벨링 기술 (QR Code-Based Strength Labeling Techniques for Concrete Life-Cycle Quality Maintenance)

  • 김태헌;김동진;박승희
    • 콘크리트학회논문집
    • /
    • 제23권5호
    • /
    • pp.603-608
    • /
    • 2011
  • 국내외적으로 수주량이 증가하고 있는 대형 구조물의 건설 시 보다 정밀한 시공 및 유지관리 기술이 요구 된다. 그 중 콘크리트의 강도는 대표적인 품질관리 변수 중 하나로, 정확한 강도 값의 측정 및 이력관리는 건설 프로세스에서의 공기단축을 통한 비용 절감 및 효율적인 시공관리를 위해 매우 중요한 요구 사항이다. 이에 이 논문에서는 유비쿼터스 시대에 적합한 건설시공기술로의 발전을 위해 최근 개발된 임베디드 자율 감지형 콘크리트 강도 모니터링 기술을 데이터베이스화하고 이를 QR(quick response)코드와 연동시키는 콘크리트 강도 라벨링 기술을 소개한다. 이를 통하여 콘크리트 구조물의 강도 이력 DB를 언제 어디서나 실시간으로 확인하고 이를 바탕으로 보다 정밀하고 경제적인 시공 및 유지관리할 수 있는 차세대 콘크리트 생애주기 품질관리 시스템으로의 실현 가능성에 대해 고찰해본다.

Seismic vulnerability macrozonation map of SMRFs located in Tehran via reliability framework

  • Amini, Ali;Kia, Mehdi;Bayat, Mahmoud
    • Structural Engineering and Mechanics
    • /
    • 제78권3호
    • /
    • pp.351-368
    • /
    • 2021
  • This paper, by applying a reliability-based framework, develops seismic vulnerability macrozonation maps for Tehran, the capital and one of the most earthquake-vulnerable city of Iran. Seismic performance assessment of 3-, 4- and 5-story steel moment resisting frames (SMRFs), designed according to ASCE/SEI 41-17 and Iranian Code of Practice for Seismic Resistant Design of Buildings (2800 Standard), is investigated in terms of overall maximum inter-story drift ratio (MIDR) and unit repair cost ratio which is hereafter known as "damage ratio". To this end, Tehran city is first meshed into a network of 66 points to numerically locate low- to mid-rise SMRFs. Active faults around Tehran are next modeled explicitly. Two different combination of faults, based on available seismological data, are then developed to explore the impact of choosing a proper seismic scenario. In addition, soil effect is exclusively addressed. After building analytical models, reliability methods in combination with structure-specific probabilistic models are applied to predict demand and damage ratio of structures in a cost-effective paradigm. Due to capability of proposed methodology incorporating both aleatory and epistemic uncertainties explicitly, this framework which is centered on the regional demand and damage ratio estimation via structure-specific characteristics can efficiently pave the way for decision makers to find the most vulnerable area in a regional scale. This technical basis can also be adapted to any other structures which the demand and/or damage ratio prediction models are developed.

역사문화도시 공주의 고도담장정비 사례 연구 (Case Study of Ancient City Wall Renewal in Gongju, a Historic Cultural City)

  • 온형근
    • 헤리티지:역사와 과학
    • /
    • 제53권2호
    • /
    • pp.254-269
    • /
    • 2020
  • 본 연구는 '고도 이미지 찾기 사업' 중 가로경관개선 사업의 하나인 담장에 대한 이론과 담장 디자인 선행 연구를 통하여 고도에서의 담장에 어울리는 담장 정비 방향을 제언하고자 한다. 연구방법은 선행 연구를 유목화하고, 담장 디자인 이론을 고찰한 후, 고도 지정 지구의 의의와 '고도 이미지 찾기 사업'의 현황을 분석하였다. 이를 바탕으로 사례 대상지를 선정하여 고도담장정비 사례 현황과 문제점을 파악하고 개선 방안을 여러 특성을 비교하여 분석하였다. 담장의 선행 연구는 담장의 성격 분석, 담장 디자인 원리 응용, 담장 구조·색채와 형태 및 응용, 현대적 재해석, 궁궐 담장, 주택·사찰·마을의 담장 등 6개 항목으로 유목화되었다. 담장은 '고도 이미지 찾기 사업' 중 가로경관개선 사업에 해당하며 시지각적 인지도가 내부 건축물보다 선경험으로 제공되는 특성이 있다. 고도담장정비 사례 대상지는 고도별 특별보존지구와 보존육성지구의 구성 분포 비율을 기준으로 무령왕릉과 인접한 공주시 송산리길 주변 마을을 선정하였다. 공주시 송산리길 주변 마을의 '고도 이미지 찾기 사업'은 한옥 신축으로 시작되었다. 그러나 담장 정비는 한옥 신축과 동시에 시행된 게 아니었다. 가로변 건축물 외관 정비 사업으로 추후에 지원과 정비가 이루어진 것이다. 한옥과 담장이 동시에 설계되어 심의 후 신축되었다면 한옥의 규모 및 디자인과 조화를 이루는 담장이 되었을 것이지만 서로 기간을 두고 신청, 설계, 시공되었기에 한옥의 처마와 담장이 대지 경계선에 거의 맞닿아 있는 결과를 초래하였다. 공간적으로 가깝고 높은 한옥 본채와 담장의 배치는 답답하게 닫혀 있는 구조물로 인식된다. 송산리길의 담장 디자인은 고도의 특성을 나타낼 수 있는 형태와 색상과 재료로 차분하고 은은하며 안온한 분위기를 자아내야 하는데, 날카롭고 옹색하여 난처한 지경에 놓여 있다. 이러한 문제점을 개선하려면 담장 설계 디자인을 먼저 고려한 후, 한옥 본채 설계 디자인을 후순위로 진행하는 방안의 도입도 합리적 대안이 될 수 있다. 사례 대상지인 공주시 송산리길 담장 지원 사업의 문제 요인은 전통 담장이 가져야 할 미적 요건에 상당히 부족하다. 첫째, 담장의 자연 재료 선정 및 활용에서 미적 의식이 실종되었다는 것이다. 둘째, 디자인 완성도와 조화의 부재이다. 조사 대상지인 공주시 송산리길 고도담장정비의 문제 요인을 분석한 개선 방향은 다음과 같다. 첫째, 한옥 설계와 담장·대문 시공 설계 도면을 함께 심의해야 한다. 둘째, 한옥 담장 디자인의 자연석 돌담 일변도를 재검토 진단하여야 한다. 셋째, 계획·설계 과정에 주민과 전문가의 의견을 조정하는 상시 체계를 가동해야 한다. 넷째, 한옥의 개별성을 집단화하여 지역의 정체성을 대표하는 문화 자산으로 가치를 높여야 한다.

수공구조물의 적정설계를 위한 유출모형 매개변수의 민감도 분석 (Sensitivity Analysis of the Runoff Model Parameter for the Optimal Design of Hydrologic Structures)

  • 이정훈;김문모;여운광
    • 한국방재학회:학술대회논문집
    • /
    • 한국방재학회 2008년도 정기총회 및 학술발표대회
    • /
    • pp.755-758
    • /
    • 2008
  • Currently, the increased run-off and the shortened arrival time are one of the causes of the city environmental disasters in urbanization. Therefore, it is necessary to properly design the hydrologic structures, but it is very difficult to forecast the values necessary to design from the planning stage. Moreover, as the parameter is changed due to the urban development, it is difficult not only to analyze the run-off influences but also to find the related studies and literatures. The purpose of this study is to utilize the results as the important basic data of the hydrologic structures, its proper design and run-off influences through the sensibility analysis of the model parameter variables. In this study, the absolute and relative sensibility analysis method were used to find out the correlation through the sensibility analysis of the topology and hydrology parameters. Especially, in this study, the changes in the run-off amount and volume were calculated according to increase/decrease in CN, the coefficient of discharge, and the empirical formula is prepared and proposed through the regressive analysis among the parameters. In the meantime, the parameter sensibility analysis was performed through the simulation HEC-HMS that is used and available in Korea. From the results of this study, it was found that the run-off amount is increased about by 10% when the CN value is increased by 5% before and after the development through the HEC-HMS simulation and data analysis. As long as there will be additional data collection analysis and result verification, and continuous further studies to find out the parameters proper to the domestic circumstances, it is expected to considerably contribute to the proper design of the hydrologic structures with respect to the ungauged basin.

  • PDF

유량지속곡선을 이용한 수문특성별 한강수계 총량관리 단위유역의 오염기여도 추정 (Estimation of Pollution Contribution TMDL Unit Watershed in Han-River according to hydrological characteristic using Flow Duration Curve)

  • 김동영;윤춘경;이한필;최재호;황하선
    • 한국물환경학회지
    • /
    • 제35권6호
    • /
    • pp.497-509
    • /
    • 2019
  • After the Total Maximum Daily Loads(TMDLs) was applied, it became beyond the limit of concentration management. However, it does not adequately reflect the characteristics of various watersheds, and causes problems with local governments because of the standard flow set. Thus, in this study, the Han River system is organized into four groups in estimating the Pollution Contribution by applying the Flow Duration Curve(FDC) created by the daily flow of data from the HSPF. And the method of this study is expected to be valuable as basic data for the TMDLs. As a result, Group I contains the main watersheds with no large hydraulic structures and tributary watersheds. There is no specificity in the FDC and the Pollution Contribution is estimated as rainfall runoff. Group II contains watersheds near the city where the FDC is maintained above a certain level during the Low Flow Conditions and the Pollution Contribution is estimated as the discharge flow of large scale point pollution facilities. Group III contains the main watersheds in which the large hydraulic structures are installed and FDC is curved in the Low Flow Conditions. So the Pollution Contribution is estimated as the water quality of the large hydraulic structures. Group IV contains the upstream in mainstream watersheds in which the large hydraulic structures are installed and the FDC is disabled before the Low Flow Conditions. As the flow is concentrated in the High Flow Conditions, the non-point pollution sources are estimated as the Pollution Contribution.

Conditional mean spectrum for Bucharest

  • Vacareanu, Radu;Iancovici, Mihail;Pavel, Florin
    • Earthquakes and Structures
    • /
    • 제7권2호
    • /
    • pp.141-157
    • /
    • 2014
  • The Conditional Mean Spectrum represents a powerful link between the seismic hazard information and the selection of strong ground motion records at a particular site. The scope of the paper is to apply for the city of Bucharest for the first time the method to obtain the Conditional Mean Spectrum (CMS) presented by Baker (2011) and to select, on the basis of the CMS, a suite of strong ground motions for performing elastic and inelastic dynamic analyses of buildings and structures with fundamental periods of vibration in the vicinity of 1.0 s. The major seismic hazard for Bucharest and for most of Southern and Eastern Romania is dominated by the Vrancea subcrustal seismic source. The ground motion prediction equation developed for subduction-type earthquakes and soil conditions by Youngs et al. (1997) is used for the computation of the Uniform Hazard Spectrum (UHS) and the CMS. The disaggregation of seismic hazard is then performed in order to determine the mean causal values of magnitude and source-to-site distance for a particular spectral ordinate (for a spectral period T = 1.0 s in this study). The spectral period of 1.0 s is considered to be representative for the new stock of residential and office reinforced concrete (RC) buildings in Bucharest. The differences between the Uniform Hazard Spectrum (UHS) and the Conditional Mean Spectrum (CMS) are discussed taking into account the scarcity of ground motions recorded in the region of Bucharest and the frequency content characteristics of the recorded data. Moreover, a record selection based on the criteria proposed by Baker and Cornell (2006) and Baker (2011) is performed using a dataset consisting of strong ground motions recorded during seven Vrancea seismic events.

가로공간 이미지에 영향을 미치는 가로변건축물 형태구성요소에 관한 연구 (A Study on the Form-Element of Buildings Affecting in Street Spaces)

  • 최임주;조현득
    • 한국지리정보학회지
    • /
    • 제13권1호
    • /
    • pp.16-27
    • /
    • 2010
  • 가로는 도시를 구성하는 선적(線的) 요소로서 도시 발전의 축이다. 이러한 가로의 본질적 기능은 통행이 목적인 교통공간이지만 이와 함께 사람과 사람의 만남, 휴식, 오락 등의 다양한 활동을 담아내는 커뮤니티의 장으로서 중요한 역할을 하고 있다. 가로는 기본적으로 보도와 차도 그리고 가로를 에워싸고 있는 가로변 건축물로 구성되는 3차원의 공간이다. 이때 가로변건축물은 가로공간을 구성하는 중요한 물리적 구성요소로 가로변건축물의 입면은 사람들이 가로공간의 이미지를 형성하는데 중요한 변수로 작용하게 된다. 이에 본 연구에서는 가로변 건축물의 입면을 구성하는 형태구성요소를 대상으로 가로경관의 이미지에 영향을 미치는 시지각적 우세요소들을 추출하고 각각의 요소들의 만족도와 선호도를 조사/분석하여 향후 도시가로 경관계획 시 기초자료로 활용할 수 있도록 제공하는데 그 목적이 있다.

Investigation of surface pressures on CAARC tall building concerning effects of turbulence

  • Li, Yonggui;Yan, Jiahui;Chen, Xinzhong;Li, Qiusheng;Li, Yi
    • Wind and Structures
    • /
    • 제31권4호
    • /
    • pp.287-298
    • /
    • 2020
  • This paper presents an experimental investigation on the surface pressures on the CAARC standard tall building model concerning the effects of freestream turbulence. Two groups of incidence turbulence are generated in the wind tunnel experiment. The first group has an approximately constant turbulence intensity of 10.3% but different turbulence integral scale varying from 0.141 m to 0.599 m or from 0.93 to 5.88 in terms of scale ratio (turbulence integral scale to building dimension). The second group presents similar turbulence integral scale but different turbulence intensity ranging from 7.2% to 13.5%. The experimental results show that the mean pressure coefficients on about half of the axial length of the side faces near the leading edge slightly decrease as the turbulence integral scale ratio that is larger than 4.25 increases, but respond markedly to the changes in turbulence intensity. The root-mean-square (RMS) and peak pressure coefficients depend on both turbulence integral scale and intensity. The RMS pressure coefficients increase with turbulence integral scale and intensity. As the turbulence integral scale increases from 0.141 m to 0.599 m, the mean peak pressure coefficient increases by 7%, 20% and 32% at most on the windward, side faces and leeward of the building model, respectively. As the turbulence intensity increases from 7.2% to 13.5%, the mean value of peak pressure coefficient increases by 47%, 69% and 23% at most on windward, side faces and leeward, respectively. The values of cross-correlations of fluctuating pressures increase as the turbulence integral scale increases, but decrease as turbulence intensity increases in most cases.