• 설비공학논문집
• /
• 제14권11호
• /
• pp.923-930
• /
• 2002

Cooling characteristics of a parallel channel with protruding heat sources using convection and conduction heat transfer are studied numerically. A two-dimensional model has been developed for numerical prediction of transient, compressible, viscous, laminar flow, and conjugate heat transfer between parallel plates with uniform block heat sources. The finite volume method is used to solve the problem. The assembly consists of two channels formed by two covers and one printed circuit board which has three uniform heat source blocks. Six different cooling methods are considered to find out the most efficient cooling method in a given geometry and heat sources. The velocity and temperature fields of cooling medium, the temperature distribution along the block surface, and the maximum temperature in each block are obtained. The results are compared to examine the cooling characteristics of the different cooling methods.

• 한국도서관정보학회지
• /
• 제34권1호
• /
• pp.195-215
• /
• 2003

This study is a bibliographical analysis on the Nam-Chungjanggong-sigo(남충장공시고), a wooden block printed book. On the view of physical bibliography, a table of contents on the Nam-Chungjanggong-sigo is compiled by a preface, a Chungjanggong's poetical works, an extra appendixes and an epilogue; and its wooden printing block has made of 52 plates. On the row of textual bibliography, text of Chungjanggong's poetical works is revised second times, such as each title or text, also title and text; and shorten for verses. And some of verses are prepared for revised the same case of compilation, but omitted in the process of last compilation.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.192-195
• /
• 2002

About 90% of Thai-style addresses have similar features; e.g. the beginning of each address line is diagonal. In this paper, we propose a method for locating destination address block (DAB) on Thai envelopes based on features of Thai-style addresses. Firstly, we decompose image into smaller blocks and remove all blocks not meeting criteria. Secondly, we search for the DAB candidates. Lastly, heuristic rules and typical features are applied to identify the destination address block. Experimental results using 2,700 envelopes of handwritten and machine printed Thai envelopes show a successful address extraction rate of 91%.

• 스마트미디어저널
• /
• 제5권2호
• /
• pp.24-32
• /
• 2016

Recently, the development of electronic teaching materials and the demand of digital learners have led the needs on the education contents that replace learning from character information and the change of an information design method for this. Chinese character education in the traditional schooling mainly focuses on writing and memorization (semantic memory). This way that the stories do not exist has brought the learners' recognition that Chinese character is difficult to learn. Meanwhile, for a language study such as English, cross-media development between printed materials and audio-visual materials has been actively introduced. The method that extends episode memories along with memorization through a story is widely used. Therefore, this content suggests a prototype, which is broken away from an existing way of learning Chinese character that mainly focuses on writing, one sided instruction and information cramming. This makes learners learn through a story from printed materials and animation. Furthermore, it suggests a method that extends episode memories through Chinese education contents based on IoT explaining the principle of Chinese character by combining IT technology (information and communications, IoT) and education contents on block toys.

• Nuclear Engineering and Technology
• /
• 제55권4호
• /
• pp.1365-1381
• /
• 2023

In this paper, a procedure for evaluating the structural integrity of the PCSG (Printed Circuit Steam Generator) unit block is presented with a simplified FE (finite element) analysis technique by applying the homogenization method. The homogenization method converts an inhomogeneous elastic body into a homogeneous elastic body with same mechanical behaviour. This method is effective when the inhomogeneous elastic body has repetitive microstructures, and thus the method was applied to the sheet assembly among the PCSG unit block components. From the method, the homogenized equivalent elastic constants of the sheet assembly were derived. The validity of the determined material properties was verified by comparing the mechanical behaviour with the reference model. Thermo-mechanical analysis was then performed to evaluate the structural integrity of the PCSG unit block, and it was found that the contact region between the steam header and the sheet assembly is a critical point where large bending stress occurs due to the temperature difference.

• 한국CDE학회논문집
• /
• 제21권2호
• /
• pp.177-185
• /
• 2016

In this paper, an optimal planning system for operating transporters in shipyard is developed. The system is designed to utilize the geometries of shipyard, and manage the data of blocks and transporters directly. There are four major menus such as shipyard map management based on GIS, block transportation request, transporter management, and optimal transportation planning in the system. The geometries and properties of the shops, roads, and addresses are manipulated in the shipyard map management menu. The block transportation requests and the properties of transporters are managed in the block transportation request and transporter management menus, respectively. The optimum transportation is planned automatically for minimizing the unload times of the transporters, and the optimum transportation plans are confirmed and printed to the transporter drivers. The effectiveness of the system was verified through the application to a large-sized shipyard.

• 마이크로전자및패키징학회지
• /
• 제20권4호
• /
• pp.75-79
• /
• 2013

A power distribution network (PDN) is a network that provides connection between the voltage source supply and the power/ground terminals of a microprocessor chip. It consists of a voltage regulator module, a printed circuit board, a package substrate, a microprocessor chip as well as decoupling capacitors. For power integrity analysis, the board and package layouts have to be transformed into an electrical network of resistor, inductor and capacitor components which may be expressed using the S-parameters models. This modeling process generally takes from several hours up to a few days for a complete board or package layout. When the board and package layouts change, they need to be re-extracted and the S-parameters models also need to be re-generated for power integrity assessment. This not only consumes a lot of resources such as time and manpower, the task of PDN modeling is also tedious and mundane. In this paper, a block-based PDN modeling is proposed. Here, the board or package layout is partitioned into sub-blocks and each of them is modeled independently. In the event of a change in power rails routing, only the affected sub-blocks will be reextracted and re-modeled. Simulation results show that the proposed block-based PDN modeling not only can save at least 75% of processing time but it can, at the same time, keep the modeling accuracy on par with the traditional PDN modeling methodology.

• Elastomers and Composites
• /
• 제51권4호
• /
• pp.301-307
• /
• 2016

Additive manufacturing (AM), so called 3D Printing is a new manufacturing process and is getting attraction from many industries. There are several methods of 3D printing. Among them fused deposition modeling (FDM) type is most widely used by reason of cheap maintenance, easy operation and variety of polymeric materials. Articles manufactured by 3D printing have weak deposition strength compared with conventionally manufactured products. Deposition strength of FDM type 3D printed article is highly dependent of deposition temperature. Subsequently the nozzle temperature in the FDM type 3D printing is very important and it is controlled by heat source in the 3D printer. Nozzle is connected with heat block and barrel, and heat block contains heat source. Nozzle becomes hot through heat conduction from heat source. Nozzle temperature has been predicted for various thermal boundary conditions by computer simulation and compared with experimental measurement. Nozzle temperature highly depends upon thermal conductivities of heat block and nozzle. Simulation results are good agreement with experiment.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권1호
• /
• pp.46-55
• /
• 2004

Thermal characteristics of the various cooling methods in electronic equipment are studied numerically. A common chip cooling system is modeled as a parallel channel with protruding heat sources. A two-dimensional model has been developed for the numerical analysis of compressible. viscous. laminar flow. and conjugate heat transfer between parallel plates with uniform block heat sources. The finite volume method is used to solve this problem. The assembly consists of two channels formed by two covers and one printed circuit board that is assumed to have three uniform heat source blocks. Various cooling methods are considered to find out the efficient cooling method in a given geometry and heat sources. The velocity and the temperature fields. the local temperature distribution along the surface of blocks. and the maximum temperature in each block are obtained. The results are compared to examine the thermal characteristics of the different cooling methods both quantitatively and qualitatively.

• 한국정보처리학회논문지
• /
• 제4권4호
• /
• pp.1141-1151
• /
• 1997

본 논문에서는 오프라인 한자의 특징 추출을 위한 최대 블록화 방법(Maximum Block Method:MBM)을 제안한다. 최대 블록화란 처며 찾아진 화소로부터 블록을 점차 키워 나 아가감 으로서 입력문자의 골격선과 특징점을 추출하는 방법이다.기존의 세선화 방법 에서는 국소적인 잡음의 영향과 굴곡점, 누락점 등에서 발생되는 왜곡 현상이 특징 추출 을 어렵게 하는 단점이 있었다. 본 논문에서는 최대 블록 생성으로 인하여 잡음블록의 제거와 합성으로 직선과 사선획을 찾으므로서, 정확한 특징점 추출하는 앙법임을 입증 하였다. 실험 데이타로는 프린터 결과물, 중고등학교 한자 교과서와 기타 문서 등을 사용하였다. 한자 이외에도 한글 및 영, 숫자를 입력하여 실험한 결과, 인식의 전처리 과정인 골격선 추출과 획의 특징 추출에서 매우 효과적인 방법임을 확인하였다.