• Journal of radiological science and technology
• /
• v.42 no.6
• /
• pp.447-454
• /
• 2019

In order to improve and supplement the shielding method for electron beam treatment, we designed a patient-specific shielding method using a 3D printer, and evaluated the usefulness by comparing and analyzing the distribution of electron beam doses to adjacent organs. In order to treat 5 cm sized superficial tumors around the lens, a CT Simulator was used to scan the Alderson Rando phantom and the DICOM file was converted into an STL file. The converted STL file was used to design a patient-specific shield and mold that matched the body surface contour of the treatment site. The thickness of the shield was 1 cm and 1.5 cm, and the mold was printed using a 3D printer, and the patient customized shielding block (PCSB) was fabricated with a cerrobend alloy with a thickness of 1 cm and 1.5 cm. The dosimetry was performed by attaching an EBT3 film on the surface of the Alderson Rando phantom eyelid and measuring the dose of 6, 9, and 12 MeV electron beams on the film using four shielding methods. Shielding rates were 83.89%, 87.14%, 87.39% at 6, 9, and 12 MeV without shielding, 1 cm (92.04%, 87.48%, 86.49%), 1.5 cm (91.13%, 91.88% with PSCB), 92.66%) The shielding rate was measured as 1 cm (90.7%, 92.23%, 88.08%) and 1.5 cm (88.31%, 90.66%, 91.81%) when the shielding block and the patient-specific shield were used together. PCSB fabrication improves shielding efficiency over conventional shielding methods. Therefore, PSCB may be useful for clinical application.

• (The)Study of the Eastern Classic
• /
• no.67
• /
• pp.35-67
• /
• 2017

This paper is a study on popularise aspects and consciousness of times about Seol-In-Gui's narrative in the Joseon Dynasty. Seol-In-Gui is general of Dang(唐) and he entered the war between Goguryeo(高句麗)and Dang. The war between Goguryeo and Dang is ended victory of Goguryeo. And Joseon peoples was long for power of Goguryeo and recognized again history of Goguryeo. So discourse of regaining native land was formed in the Joseon Dynasty. Besides was very popular in the Joseon Dynasty. Seol-In-Gui's narrative and are quite similar. And Dang-Tae-Jong, Ul-Ji-Gyeong-Deg's old story was prevalence. Dang-Tae-Jong and Ul-Ji-Gyeong-Deg entered war between Goguryo and Dang. Therefore Seol-In-Gui's narrative was popular in the Joseon Dynasty. Popularise aspects of Seol-In-Gui's narrative as follows. First, Seol-In-Gui's conquest of Yodong(遼東) narrative and heroism was gradually emerged in Seoul block printed of 40, 30 sheets version and printed book of . Second, Dang-Tae-Jong, Ul-Ji-Gyeong-Deg, Hab-So-Mun's individual narrative was formed. Third, Seol-In-Gui's narrative was expended to female hero's conquest of West-Beon(西蕃) narrative. Because are adaptations of . And is succession of Seol-In-Gui's narrative. Seol-In-Gui is people, Ben-Li-Hwa is female, Ben-Li-Hwa and Ul-Ji-Gyeong-Deg are ethnic. It is revealed that people, female, ethnic are real ability of Chinese nation. Furthermore it is revealed that people and female must are appointed and ethnic must is combined. Besides it is revealed that it is necessary built up national strength of Joseon Dynasty like Goguryeo and Goryeo. After the Manchu Invasion of Korea in 1636 national strength of Joseon Dynasty was weaken. So the Joseon Dynasty People long to be intensifed national strength keep in check China.

• Journal of Korean Library and Information Science Society
• /
• v.50 no.4
• /
• pp.305-337
• /
• 2019

The aim of this thesis is to explore some aspects and characteristics of 109 volumes of collections of works at Uiryeong area in Gyeongsangnam-do Province. The author analyzed type of printing, type of collections of works, their birth year and the family name of the author, the place and the year, and the publisher of the publication of these different 109 kinds of the collections of works. The results are as follows: The collections of works demonstrate their forefathers' academic competencies. The types of printings were divided into 4 types, wood block printing, wooden movable-type printing, new lead-type printing, lithography printing. Of the collections of works 48% were wooden movable-type printing. The types of collections of works were divided into 3 types, Munjip(文集), Yujip(遺集), and Silgi(實記). Of the collections of works 49% were Munjip. The authors were local intellectuals. Of these authors 67% of authors were born in the 19th century. Twenty nine lineage groups published collections of works at Uiryeong area. 90% of the publications were published in the 20th century. In terms of place, 81% of the collections of works were published in the worshipping halls for their ancestors. 63% of the collections of works were published within 50 years after the author had died.

• Journal of the Korean Institute of Rural Architecture
• /
• v.20 no.2
• /
• pp.49-56
• /
• 2018

The vernacular houses with 田-shaped floor plan at Gangreung have been played important roles in tracing the vernacular living cultures including housing life. But due to the adoption of convenient facilities in vernacular housing lives caused by modernization and urbanization, many changes and transformations have happened at residential space of vernacular houses. This thesis targets to extract basic data to prepare and prevent various problems in process of renovation, extension and function change as installing housing life facilities, and to identify the changes and transformations of them to prepare the proper balances between their original form preservation and residents' convenience living. The results are as follows. The inner wall removal of rooms, the fuel change of cooking and heating, the leveling change of kitchen floor made possible the sedentary lifestyles. And its residential rooms were transformed from two row to one row by inner wall removal, the fuel heating change, the heating method change and the heat insulating materials. The residential extension materials were changed from the traditional materials such as soil, wood, etc to the modern materials such as cement block or brick, sandwich panel, etc. And the modern materials were used and attached to widen residential spaces to the vernacular house because of the easiness of execution. So, it is necessary for 田-shaped floor plan vernacular house owners to distribute printed execution guide book to prevent and minimize the various problems to be shown by extension, renovation and function change.

• Journal of Welding and Joining
• /
• v.35 no.2
• /
• pp.58-62
• /
• 2017

A319 aluminum alloy containing 6.5% Si and 3.5% Cu as major alloying elements has been widely used in machinery parts because of its excellent castability and crack resistance. However it needs more wear resistance to extend its usage to the severe wear environments. It has been known that hyper-eutectic Al-Si alloy having more than 12.6% Si contains pro-eutectic Si particles, which give better wear resistance and lubrication characteristics than hypo-eutectic Al-Si alloy like A319 alloy. In this study, it was tried to clad hyper-eutectic Al-Si alloy on the surface of A319 alloy. In the experiments, Al-36%Si alloy powder was mixed with organic binder to make a fluidic paste. The paste was screen-printed on the A319 alloy surface, melted by pulsed Nd:YAG laser and alloyed with the A319 base alloy. As experimental parameters, the average laser power was changed to 111 W, 202 W and 280 W. With increasing the average laser power, the melting depth was changed to $142{\mu}m$, $205{\mu}m$ and $245{\mu}m$, and the dilution rate to 67.2 %, 72.4 % and 75.7 %, and the Si content in the cladding layer to 16.2 %, 14.6 % and 13.7 %, respectively. The cross-section of the cladding layer showed very fine eutectic microstructure even though it was hyper-eutectic Al-Si alloy. This seems to be due to the rapid solidification of the melted spot by single laser pulse. The average hardness for the three cladding layers was HV175, which was much higher than HV96 of A319 base alloy. From the block-on-roll wear tests, A319 alloy had a wear loss of 5.8 mg, but the three cladding layers had an average wear loss of 3.5 mg, which meant that an increase of 40 % in wear resistance was obtained by laser cladding.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.10
• /
• pp.752-757
• /
• 2018

This study presents the performance evaluation results of a 77-GHz waveguide slot array antenna that was fabricated by attaching a patterned printed circuit board(PCB) on a metal block. The 77-GHz waveguide was divided into a top plate and a bottom structure. The top plate was fabricated using a patterned PCB that can implement a fine slot at low cost. The top cover was then bonded to the bottom metal structure with a waveguide trough using anisotropic conductive film. For evaluating the antenna performance, a $1{\times}16$ slot array antenna was fabricated using our proposed method and the gain and pattern were measured and compared with the simulation results. Though the measurement results demonstrate a reduction in gain of around 2.3~3.5 dB compared to the simulation results assuming ideal bonding conditions, the pattern hardly changed and the slot antenna with a gain of approximately 17 dBi at 77 GHz can be easily manufactured at a low cost using the proposed method.

• Journal of the Korean Geographical Society
• /
• v.45 no.1
• /
• pp.184-200
• /
• 2010

The production period of Daedongyeojijeondo is estimated from 1861 to 1866 in consideration of place names. Daedongyeojijeondo is elaborated enough that there are the latest data in, especially is better than Haejwajeondo that is a representative map in the 19th century in marking distance. Daedongyeojido is an official map for national defense and administration, on the other hand Daedongyeojijeondo is a popular map in which social and economical contents are included. The recognition of mountains and rivers based on organic view of the land is also represented in Daedongyeojijeondo, and the principle of the whole of mountains and rivers is well reflected. It is far better than modem maps in the expression of road system and distances, tidal area in rivers.

• Journal of radiological science and technology
• /
• v.41 no.6
• /
• pp.595-602
• /
• 2018

Quality control (QC) of Computed Tomography (CT) devices is based on image quality measurement on AAPM CT phantom which is a standard phantom. Although it is possible to control the accuracy of the CT apparatus, it is expensive and has a disadvantage of low penetration rate. Therefore, in this study, we make image quality measurement phantom at low cost using FFF (Fused Filament Fabrication) type three-dimensional printer and try to analyze the usefulness, compare it with existing standard phantom. To print a phantom, We used three-dimensional printer of the FFF system and PLA (Poly Lactic Acid, density: $1.24g/cm^3$) filament, and the CT device of 64 MDCT (Aquilion CX, Toshiba, Japan). In addition, we printed a phantom using three-dimensional printer after design using various tool based on existing standard phantom. For image quality evaluation, AAPM CT phantom and self-generated phantom were measured 10 times for each block. The measured data were analyzed for significance using the Mannwhiteney U-test of SPSS (Version 22.0, SPSS, Chicago, IL, USA). As a result of the analysis, phantom fabricated with three-dimensional printer and standard phantom showed no significant difference (p>0.05). Furthermore, we confirmed that image quality measurement performance of a phantom using three-dimensional printer is similar to the existing standard phantom. In conclusion, we confirmed the possibility of low cost phantom fabrication using three dimensional printer.

• Journal of Korean Society of Forest Science
• /
• v.62 no.1
• /
• pp.53-59
• /
• 1983

The use of computers for storing or analyzing the data collected is expected to increase in next decade. A simple program written in Fortran IV was used at the Seoul National University nursery for inventorying the trees growing and for recording the past cultural treatments and present status. The data in the program included blocks, uses, tree species, damage conditions and cultural treatments, and each of the items were branched into specific classes. Thus the record printed in the output helped identify quickly the damage conditions of each block which, in turn, contributed to manage efficiently forest nursery.

• Journal of KIISE:Software and Applications
• /
• v.31 no.9
• /
• pp.1121-1130
• /
• 2004

This paper proposes a method for line and word segmentation for machine-printed text blocks. To separate a text region into the unit of lines, it analyses the horizontal projection profile and performs a recursive projection profile cut method. In the word segmentation, between-word gaps are identified by a hierarchical clustering method after finding gaps in the text line by using a connected component analysis. In addition, a special symbol detection technique is applied to find two types of special symbols tying between words using their morphologic features. An experiment with 84 text regions from English and Korean documents shows that the proposed method achieves 99.92% accuracy of word segmentation, while a commercial OCR software named Armi 6.0 Pro$^{TM}$ has 97.58% accuracy.y.