• Journal of Sericultural and Entomological Science
• /
• no.11
• /
• pp.1-14
• /
• 1970

The following results were obtained by surveying the productivity of mulberry fields in Korea. 1. The productivity of mulberry field per 10a in which cocoon can be yield belongs to the range of 9.8∼105kg, and among them the productivity of 20 to 60kg was chiefly distributed. And their average was 50.2kg. 2. In general, the larger the mulberry field in scale per a person is, the lower the productivity of it is, but about 6.6 ares per a person was estimated to be economic scale for high productivity. 3. As far as the texture of soil is concerned, sandy-loam and loam contained a capacity of higher productivity while others like clay and sand that of lower productivity, And the depth of surface soil must be at least 50cm, although 70cm's depth of surface sail could bring about high productivity. 4. Fertilization of 900kg's compost on planting and 1,200kg's that after planting could enhance the productivity, because the use of compost have a positive relation to the productivity. 5. The greater the number of farmer's domestic animals is as a source of organic matter the higher the productivity is. 6. In the case of fertilization of 1,200kg compost, the amount of 20kg's nitrogen per 10 ares as chemical manure was best for high productivity. However, fertilization of 14.7kg's nitrogen as average amount of that, which is far below the standard amount, had been a factor to reduce the productivity of mulberry field. 7. In pruning the low-cut form resulted in high productivity, but as their shape become taller due to the lack of techniques, they were turned out to be non head pruning, thus to produce poor harvest of leaves. 8. The pure mulberry fields showed better productivity than others such as wide and narrow ridge planting and inter-crop planting. 9. As for the degree of planting density, at least 800 trees per 10 ares should be planted to increase the productivity, although the planting of 713 trees per 10 ares could be possible in case of the low stemmed pruning. 10. The hole and tranch in planting must be digged as wider and dipper as possible far the better growth of mulberry tree. 11. On the whole, varieties like NOsang and Y oung-cheun choowoo had a tendency of lower productivity.

• Korean Journal of Mineralogy and Petrology
• /
• v.34 no.4
• /
• pp.241-253
• /
• 2021

Manganese nodules have been found in the shallow water depth of the Arctic Ocean as well as in the abyssal plains of the Pacific and Indian Oceans, but detailed study for them were rarely investigated. Manganese nodules, collected from the East Siberian Sea through the Arctic Expedition using Araon ice braking vessel, have a high potential for Mn mineral resources because they have high Mn content with high Mn/Fe ratio. This study investigated the external form, size and weight, internal texture for the non-spherical manganese nodule, which has about 7 % of total nodule from the East Siberian Sea. This study also researched the relative Mn-oxide mineral composition using the peak area ratio of X-ray diffraction pattern and their chemical composition. All data obtained from non-spherical nodules were compared with the spherical ones. Ellipsoidal, platy and irregular types are common among 5 groups of non-spherical manganese nodule based on the external form, and major axis and weight have positive relationship. All non-spherical manganese nodules have core mainly composed of mud sediments. The average Mn oxide mineral contents in nodules are birnessite, buserite and todorokite in descending order. Although mineral composition does not show any correlation with the external form, kind of core or internal structure, todorokite and buserite contents tend to increase and birnessite content decrease from the surface to the core in the nodule. Non-spherical manganese nodules have higher Mn content and Mn/Fe ratio than those from the shallow water depth of the Arctic Sea and even in the deep-sea of the Pacific and Indian Ocean. Although non-spherical nodule is larger and heavier, and has lower Mn content and Mn/Fe ratio than spherical nodule, there are not any differences in mineral composition and internal structure between them. Almost all manganese nodules collected from the East Siberian Sea are attributed to diagenetic process, because they are higher than 5 in Mn/Fe ratio.

• Journal of agriculture & life science
• /
• v.50 no.1
• /
• pp.167-178
• /
• 2016

This study was conducted to estimate genetic parameters for milk production and linear type traits in Holstein dairy cattle in Korea. The data including milk yields, fat yields, protein yields, fat percent, protein percent, somatic score and 15 linear type traits for 10,218 first parity cows collected by Dairy Cattle Improvement Center, National Agricultural Cooperative, Korea, which were calving from January 2009 to April 2013. Genetic and error (co)variances between two traits selected form 19 traits were estimated using bi-trait pairwise analyses with WOMBAT package. The estimated heritabilities for milk yield(MY), fat yield(FY), protein yield(PY), fat percent(FP), protein percent(PP), somatic cell score(SCS), udder depth(UD), udder texture(UT), median suspensory(MS), fore udder attachment(FUA), front teat placement (FTP), rear attachment height(RAH), rear attachment width(RAW), rear teat placement(RTP), front teat length(FTL), foot angle(FA), heel depth(HD), bone quality(BQ), rear legs side view(RLSV), rear legs rear view(RLRV) and locomotion(LC) were 0.128, 0.144, 0.100, 0.273, 0.333, 0.090, 0.179, 0.066, 0.104, 0.109, 0.127, 0.099, 0.059, 0.069, 0.154, 0.014, 0.010, 0.052, 0.065, 0.175 and 0.031, respectively. Among the genetic correlations, UD, UT, FTP, RAW, FTL, FA and RLSV with MY were -0.334, 0.271, 0.445, 0.544, 0.076, -0.281 and -0.228, respectively, and MS, FTP, RTP, FTL, FA, BQ, RLSV, RLRV and LC with PP were -0.147, -0.182, -0.262, -0.136, 0.355, 0.311, 0.135, 0.233 and 0.143, respectively. Especially, MY had the highest positive genetic correlation with RAW (0.544), while SCS had the highest negative genetic correlation with LC (-0.603). FP had negative genetic correlation with most udder traits, whereas, FP had positive genetic correlation with leg and hoof traits (0.056 - 0.355).

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.3
• /
• pp.344-352
• /
• 2012

Soil physical properties determine soil quality in aspect of root growth, infiltration, water and nutrient holding capacity. Although the monitoring of soil physical properties is important for sustainable agricultural production, there were few studies. This study was conducted to investigate the condition of soil physical properties of arable land according to land use across the country. The work was investigated on plastic film house soils, upland soils, orchard soils, and paddy soils from 2008 to 2011, including depth of topsoil, bulk density, hardness, soil texture, and organic matter. The average physical properties were following; In plastic film house soils, the depth of topsoil was 16.2 cm. For the topsoils, hardness was 9.0 mm, bulk density was 1.09 Mg $m^{-3}$, and organic matter content was 29.0 g $kg^{-1}$. For the subsoils, hardness was 19.8 mm, bulk density was 1.32 Mg $m^{-3}$, and organic matter content was 29.5 g $kg^{-1}$; In upland soils, depth of topsoil was 13.3 cm. For the topsoils, hardness was 11.3 mm, bulk density was 1.33 Mg $m^{-3}$, and organic matter content was 20.6 g $kg^{-1}$. For the subsoils, hardness was 18.8 mm, bulk density was 1.52 Mg $m^{-3}$, and organic matter content was 13.0 g $kg^{-1}$. Classified by the types of crop, soil physical properties were high value in a group of deep-rooted vegetables and a group of short-rooted vegetables soil, but low value in a group of leafy vegetables soil; In orchard soils, the depth of topsoil was 15.4 cm. For the topsoils, hardness was 16.1 mm, bulk density was 1.25 Mg $m^{-3}$, and organic matter content was 28.5 g $kg^{-1}$. For the subsoils, hardness was 19.8 mm, bulk density was 1.41 Mg $m^{-3}$, and organic matter content was 15.9 g $kg^{-1}$; In paddy soils, the depth of topsoil was 17.5 cm. For the topsoils, hardness was 15.3 mm, bulk density was 1.22 Mg $m^{-3}$, and organic matter content was 23.5 g $kg^{-1}$. For the subsoils, hardness was 20.3 mm, bulk density was 1.47 Mg $m^{-3}$, and organic matter content was 17.5 g $kg^{-1}$. The average of bulk density was plastic film house soils < paddy soils < orchard soils < upland soils in order, according to land use. The bulk density value of topsoils is mainly distributed in 1.0~1.25 Mg $m^{-3}$. The bulk density value of subsoils is mostly distributed in more than 1.50, 1.35~1.50, and 1.0~1.50 Mg $m^{-3}$ for upland and paddy soils, orchard soils, and plastic film house soils, respectively. Classified by soil textural family, there was lower bulk density in clayey soil, and higher bulk density in fine silty and sandy soil. Soil physical properties and distribution of topography were different classified by the types of land use and growing crops. Therefore, we need to consider the types of land use and crop for appropriate soil management.

• Korean Journal of Soil Science and Fertilizer
• /
• v.10 no.3
• /
• pp.189-201
• /
• 1977

Some of basic aspects of soil potassium with special reference to soil physical properties were discussed. Data in the Official Soil Series Description(Korea) was analyzed according to soil type, land form, and soil texture to find soil potassium status which may explain different response to potassium application. Exchangeable potassium contents decreased with soil depth irrespective of soil type, land form and soil texture. Change in degree of potassium saturation within soil profile was not so clear as exchangeable potassium but the degree of potassium saturation of A horizon was highest among soil horizon. Soils of terrace and mountain foot slope showed high values both in exchangeable potassium and degree of potassium sauration and only these two soils were classified as soils having exchangeable potassium higher than 0.3 meq per 100g of soil and degree of potassium saturation higher than 5.0%. Exchangeable potassium of fine loamy and fine clayey soils is higher than 0.3 meq per 100g of soil but degree of potassium saturation is lower than 4.0%. Degree of potassium saturation of sandy soils exceeds 5.0% but exchangeable potassium is very low. Soils of rolling, hilly, unmatured and alpine land soils have lower exchangeable potassium and show lower degree of potassium saturation. The highest distribution of exchangeable potassium content irrespective of soil horizons was shown in the range of 0.1-0.2 meq per 100g of soil. The highest distribution of degree of potassium saturation was in the range of 2.0-3.0% in A horizon and 1.0-2.0% in B and C horizons. Of the soil series concerned in this analysis, 27.3% in A horizon, 11.1% in B horizon and 4.0% in C horizon had exchangeable potassium higher than 0.3 meq per 100g of soil and 18.0% in A horizon, 6.3% in B horizon, and 4.1% in C horizon showed degree of potassium saturation higher than 5.0%. The low response of potassium application only to soils in terrace and mountain foot slope may be resulted from the high exchangeable potassium content and high degree of potassium saturation. It is concluded that a great response of potassium application to soils is expected especially in dry season.

• Journal of Bio-Environment Control
• /
• v.18 no.4
• /
• pp.309-315
• /
• 2009

Maintenance of adequate soil water content during the period of crop growth is necessary to support optimum plant growth and yields. A better understanding of soil water movement for precision irrigation would allow efficient supply of water to crops, thereby resulting in minimization of water drainage and contamination of ground water. This research reports on the characterization of spatial and temporal variations in water contents through three different textured soils, such as loam, sandy loam, and loamy sand, when water is applied on the soil surface using an one-line drip irrigation system and the soils are dried after the irrigation stops, respectively. Water contents through each soil profile were continuously monitored using three Sentek probes, each consisting of three capacitance sensors at 10, 20, and 30cm depths. Spatial variability in water content for each soil type was strongly influenced by soil textural class. There were big differences in wetting pattern and the rate of downward movement between loam and sandy loam soils, showing that the loam soil had a wider wetting pattern and a slower rate of downward movement than did the sandy loam soil. The wetting pattern in loamy sand soil was not apparent due to a low variability in water content (< 10%) by a lower-water holding capacity as compared to those measured in the loam and sandy loam soils, implying that the rate of water drainage below a depth of 30cm was high. When soils were dried, there were highly exponential relationships between water content and time elapsed after irrigation stops ($r^2$${\geq}$0.98). It was estimated that equilibrium moisture contents for loam, sandy loam, and loamy sand soils would be 17.6%, 6.2%, and 4.2%, respectively.

• Korean Journal of Soil Science and Fertilizer
• /
• v.17 no.4
• /
• pp.330-336
• /
• 1984

These studies were aimed to find out the representative values of physico-chemical properties in Korean soils and to serve the basic informations to improve the soil properties for increasing the soil productivity. By the results of detailed soil survey, 14 physico-chemical properties (soil texture, moisture characteristics, organic matter content etc) were collected from 315 series of soils except Cheju soils, computerized the simple mean and the distributed area by weighted mean values with grouping of land use, drainage class and soil type. The results were as follows; 1. Simple mean values within the efficient soil depth in whole country soils were clay 20.0%, organic matter 2.03% and CEC 10.3me/100g. But weighted mean values with land area belonged to the same soil series were clay 18.0%, OM 1.85% and CEC 8.6me/100g. 2. Mean values of paddy soils weighted by area were clay 19.7%, OM 2.0% and CEC 9.1me/100g but those of upland soils were 17.9%, 1.8% and 8.1me/100g and forest soils were 16.7%, 1.8% and 8.6me/100g respectively. 3. Weighted mean values of moderately well soils with covered area were clay 18.9%, organic matter 1.7%, CEC 8.4me/100g but those of imperfectly drained soils were 21.3%, 2.2% and 9.5me/100g, and those of poorly drained soils were 15.1%, 1.8% and 9.9me/100g respectivcly. 4. Simple mean and area weighted mean values of clay content, pH, organic matter contents, cation exchange capacity and base saturation were calculated by the types of paddy and upland.

• Journal of Bio-Environment Control
• /
• v.20 no.2
• /
• pp.93-100
• /
• 2011

Maintenance of adequate soil water potential during the period of crop growth is necessary to support optimum plant growth and yields. A better understanding of soil water movement within and below the rooting zone can facilitate optimal irrigation scheduling aimed at minimizing the adverse effects of water stress on crop growth and development and the leaching of water below the root zone which can have adverse environmental effects. The objective of this study was to evaluate the feasibility of using a portable irrigation controller with an Watermark sensor for the cultivation of drip-irrigated vegetable crops in a greenhouse. The control capability of the irrigation controller for a soil water potential of -20 kPa was evaluated under summer conditions by cultivating 45-day-old tomato plants grown in three differently textured soils (sandy loam, loam, and loamy sands). Water contents through each soil profile were continuously monitored using three Sentek probes, each consisting of three capacitance sensors at 10, 20, and 30 cm depths. Even though a repeatable cycling of soil water potential occurred for the potential treatment, the lower limit of the Watermark (about 0 kPa) obtained in this study presented a limitation of using the Watermark sensor for optimal irrigation of tomato plants where -20 kPa was used as a point for triggering irrigations. This problem might be related to the slow response time and inadequate soil-sensor interface of the Watermark sensor as compared to a porous and ceramic cup-based tensiometer with a sensitive pressure transducer. In addition, the irrigation time of 50 to 60 min at each of the irrigation operation gave a rapid drop of the potential to zero, resulting in over irrigation of tomatoes. There were differences in water content among the three different soil types under the variable rate irrigation, showing a range of water contents of 16 to 24%, 17 to 28%, and 24 to 32% for loamy sand, sandy loam, and loam soils, respectively. The greatest rate increase in water content was observed in the top of 10 cm depth of sandy loam soil within almost 60 min from the start of irrigation.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.6
• /
• pp.1203-1210
• /
• 2012

As the area of upland crops increase, it is become more important for farmers to understand status of soil water at their own fields due to key role of proper irrigation. In order to estimate daily water balance and soil water content with simple weather data and irrigation records, we have developed the model for estimating water balance and soil water content, called AFKAE0.5, and verified its simulated results comparing with daily change of soil water content observed by soil profile moisture sensors. AFKAE0.5 has two hypothesis before establishing its system. The first is the soil in the model has 300 mm in depth with soil texture. And the second is to simplify water movement between the subjected soil and beneath soil dividing 3 categories which is defined by soil water potential. AFKAE0.5 characterized with determining the amount of upward and downward water between the subjected soil and beneath soil. As a result of simulation of AFKAE0.5 at Gongju region with red pepper cultivation in 2005, the water balance with input minus output is recorded as - 88 mm. the amount of input water as precipitation, irrigation, and upward water is annually 1,043, 0, and 207 mm, on the other, output as evapotranspiration, run-off, and percolation is 831, 309, and 161 mm, respectively.

• Korean Journal of Soil Science and Fertilizer
• /
• v.25 no.1
• /
• pp.26-37
• /
• 1992

Fifty-five field experiments were conducted in order to find out some useful indices for the prediction of N-supplying capability(NSC) of soils under cultivation of corn in Pennsylvania over 3 years from 1986. Contents of $NO_3-N$, absorbance at 200 nm of the extract from soil with 0.01M $NaHCO_3$ were identified to be used as indices before planting. Methods for the estimation of organic nitrogen available later in the growing season(KCLA-N, PBBA-N, UV260 nm absorbance of $NaHCO_3$ extract) were not to be used as good indices individually, but when those are combined together with inorganic $NO_3-N$ showed a highly significant correlationship with the NSC. The year of an even distribution of rainfall, 1987, gave the highest significant correlationship between NSC and the indices. For soils of the same texture with slightly different physical properties, combined indices obtained from physico-chemical factors improved the degree of predictability when the grades of soil slope, depth of Ap were considered at the same time. More futher researches such as this need to be done before any conclusive result can be drawn.