• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.5
• /
• pp.916-921
• /
• 2011

This study was carry out on a Jang-Won series (fine loamy, mixed, mesic family of typic fragipan) that were established and classified as a fragipan soil in Korea. The morphological, physical, chemical and minerals characteristics of Jang-Won series were studied to determine the genesis of fragipan soils in natural environment. Each sample was analyzed for its physical, chemical and mineralogical characteristics. The particle size distribution of samples was measured using pipette method. Clay minerals were investigated on parallel-oriented specimens of the clay fraction ($<2{\mu}m$) from each horizon, separated by sieving and centrifugation, using X-ray diffraction (XRD) analysis. Micromorphological observations were made on thin sections prepared from soil blocks impregnated with Crystic Resin, cut and ground to less than $30{\mu}m$ in thickness, and finally polished with diamond paste. Most horizons have pH values in the range of fewer than 5.0 and have very low base-saturation values. Their textural classification ranges from silt loam to loam, the lower horizons being the finer. The clay fraction revealed the occurrence of illite, kaolinite, chlorite and vermiculite. The micro-morphological analysis carries out thin sections from each soil profile. The silt concentrations occur as extremely dense and homogenous bands or zones of silt-sized materials, brownish in colour in plane-polarized light and anisotropic in cross-polarized light, surrounding or adhering to skeleton grains. The genesis of fragipan in the Jangweon series assumed composition of clay fraction rather than silt concentration. Therefore, this results suggested an authentic interpretation which Jangweon series is classification as Typic Fragiochrepts.

• Proceedings of the Korea Hospitality Industry Research Society Conference
• /
• 2002.11a
• /
• pp.83-98
• /
• 2002

The old testament of the Bible has written the milk and curd. God said, I will ive you to how the milk and honey. The present study was designed to examine the effects of different homogenization pressure, homogenization temperature and $\beta$-cyclodextrin concentration on cholesterol removal rate of cheese, and to optimize the factors of cheese manufacture Process. In addition, the characteristics from cholesterol removed cheese and control are compared in the rheological and ensory analysis. The optimized process condition for cholesterol removal was for homogenization pressure, 74$^{\circ}C$ for homogenization temperature and 2% for $\beta$-cyclodextrin concentration, it showed 875% of the highest cholesterol removal rate in milk. Therefore, manufacture conditions of cholesterol removed cheese were chosen 74$^{\circ}C$ for homogenization temperature, for homogenization pressure, and I or 2% for $\beta$-cyclodextrin concentration. Cholesterol removed cheese and control were compared with yield, cholesterol removal, meltability, stretchability, textural properties and sensory analysis. Cholesterol content of control cheese containing 23.8% milk fat was cheese made from milk treated with 2% $\beta$-cyclodextrin and homogenization pressure was cholesterol removal. Yield of cholesterol removed cheese. As the homogenization pressure increased, oiling off reduced with showed better surface appearance. Stretchability of cholesterol removed cheese was lower 5~10cm than over 30cm of control. Meltability of cholesterol removed cheese also was lower than control. The hardness, gumminess, chewiness reduced to respectively. In the result of sensory analysis, treatment of homogenization for cholesterol removed cheese improved appearance and flavor, however texture fell. In addition, the resent result of the study indicated that about 75% of cholesterol in cheese could be removed, and the possibility of development of cholesterol removed cheese was observed. We have hope to research manufacture cheese global wide.

• Journal of the East Asian Society of Dietary Life
• /
• v.17 no.4
• /
• pp.547-553
• /
• 2007

The physicochemical and functional properties of tofu prepared with kanghwang(Curcuma aromatica Salab.) were investigated, in order to study the effects of six different commercial coagulants. The coagulant concentrations were determined as 0.3% GDL, 0.3% $MgCl_2$, 1.0% $CaCl_2$, 1.5% $CaSO_4$, 0.45% mixed coagulant, and 1.5% Milky-Mg by pre-experiments. Also, the optimum concentration for the added kanghwang(Curcuma aromatica Salab.) was chosen as 0.01%. The yields of the kanghwang tofu prepared with Milky-Mg, mixed, and GDL coagulants were higher than those prepared with $MgCl_2$, $CaCl_2$, and $CaSO_4$. The pH of the kanghwang tofu prepared with the $MgCl_2$ coagulant was higher than when made with the other coagulants. The turbidity of the kanghwang tofu was highest when it was coagulated with GDL, and moisture content was highest or the of kanghwang tofu coagulated with $CaCl_2$. In the color analysis of the kanghwang tofu, the $L^{***}$ value was highest with the Milky-Mg coagulant, while the $a^{***}$ value was highest and the b value lowest with the GDL coagulant. For the textural properties, the hardness results were in the order of $CaSO_4$ > $CaCl_2$ > $MgCl_2$ > mixed > GDL > Milky-Mg, springiness, gumminess, and brittleness were highest in the tofu coagulated with Milky-Mg. For the overall acceptability of the sensory properties, the Kanghwang tofu that was made using the mixed coagulant had the highest score.

• Korean Journal of Food Science and Technology
• /
• v.49 no.6
• /
• pp.575-583
• /
• 2017

Germination is a well-known economical technique that has been utilized to enhance the nutritional value of brown rice. Owing to its higher nutritive quality, germinated brown rice has received significant attention in the past decade. In this study, the physicochemical and cooking properties of specialty brown rice (SBR) were analyzed before and after germination. Germination enhanced cooking properties such as water absorption, expanded volume, and increased solid solubility of cooked SBR. The SBR texture measured using tensipresser, was significantly improved by germination. The hardness of cooked SBR was decreased by germination, but stickiness was increased. Pasting analysis of the SBR flours revealed a decrease in all viscosity values (peak viscosity, breakdown, setback, and final viscosity) after germination. However, the gelatinization temperature remains unchanged upon germination. Additionally, amylose content and amylopectin chain length distribution of SBR starch were slightly changed by germination. These results indicate that germination leads to a substantial improvement in the cooking properties and texture of SBR.

• Journal of Animal Science and Technology
• /
• v.48 no.4
• /
• pp.611-622
• /
• 2006

Fatty acid compositions and physicochemical properties of feta cheese made from bovine milk were studied. Nutritional compositions of feta cheese were fat 22.79%, protein 10.57% with moisture content of 59.87%. The log cfu/g of lactic acid bacteria in bovine feta cheese decreased from 10.25 to 7.95 and pH also changed from pH 6.22 to pH 5.55 during storage at 4℃ for 14 d aging. The color of feta cheese turned into more whitish (L-value, 100.1) with a red (a-value, 4.6) and gray (b-value,－4.1) color after 14day's aging. For the texture profile analysis of bovine feta cheese, resilience was increased significantly (p<0.01) throughout the aging periods and adhesiveness was rapidly increased right after progressing of aging at both temperatures, but no difference was found between the aging periods. Hardness, fracturability, gumminess and chewiness were gradually increased at 0℃, but no statistical significances were found. Springiness and cohesiveness were not changed at both temperatures. In organoleptic evaluations, organoleptic intensities in sweetness, milky taste and saltiness were significantly enhanced over those of the control cheese at the level of p<0.01, and masticatory texture at p<0.05 with the progress of aging to 14d. Organoleptic preferences were significantly (p<0.01) enhanced except smell, color, mouth feel, and masticatory texture with the aging. In the fatty acid compositions of feta cheese analyzed by gas chromatography, the content of SFA (52.61%) was slight higher than that of USFA (47.39%) composed with MUFA (28.98%) and PUFA (18.41%). Among the nutritionally important fatty acids; ω6 (9.27%) and ω3 (0.55%) fatty acids, CLA (0.12%), arachidonic acid (0.19%) and DHA (0.12%) were also found in bovine feta cheese.

• The Journal of the Petrological Society of Korea
• /
• v.7 no.2
• /
• pp.132-145
• /
• 1998

The coal-bearing siliciclastic rocks of the Lower Permian Jangseong Formation, Samcheog coalfield, represent a megacyclothem which shows cyclic repetitions of sandstone, shale, coaly shale, and coals. Petrographic, geochemical, and SEM studies for sandstone samples, and XRD analysis for clay minerals were carried out to understand diagenesis in the sandstones of the Jangseong Formation. The Jangseong sandstones are composed of 60% quartz (mainly monocrystalline quartz) and 36% clay matrix and cement with minor amounts of feldspar, lithic fragments and accessory minerals (less than 4%). Jangseong sandstones are classified mostly as quartzwackes and partly as lithic graywackes according to the scheme of Dott(1964). The textural relationships between authigenic minerals and cements in thin sections and SEM photomicrographs suggest the paragenetic sequence as follows; (1) mechanical compaction, (2) cementation by quartz overgrowth, (3) formation of authigenic clay minerals (illite, kaolinite), (4) dissolution of framework grains and development of secondary porosity, and (5) later-stage pore-filling by pyrophyllite. We propose that these diagenetic processes might be due to organic-inorganic interaction between the dominant framework grains and the formation water. The Al, Si ions and organic acid, derived from dewatering of interbedded organic-rich shale and coals, were transported into the Jangseong sandstones. This caused changes in the chemistry of the formation water of the sandstones, and resulted in overgrowth of quartz and precipitation of authigenic clay minerals of kaolinite and illite. The secondary pores, produced during dissolution of clay and framework grains by organic acid and $CO_2$ gas, were conduit for silica-rich solution into the Jangseong sandstones and the influx of silica-rich solution produced the late-stage pyrophyllite after the expanse of kaolinite. The origin of the solution that formed pyrophyllite is not likely to be the organic-rich formation water based on the observation of fracture-filling pyrophyllite in the Jangseong sandstones, but the process of pyrophyllite pore-filling was indirectly related to organic-inorganic interaction.

• Korean journal of food and cookery science
• /
• v.2 no.1
• /
• pp.45-53
• /
• 1986

This study was conducted to investigate the effects of the properties of sugar (20％, 30%) and starch (l5％, 20%, 25％) to Angdo on Angdo Pyun's preference, texture and color_ Textural characteristics were examined through sensory evaluation, Rheometer. Color test by Color and color difference meter. The properties through sensory evaluation were appearance, color, flavor, hardness, thickness and acceptability. With Rheometer, compression force, work ratio, adhesive work and gumminess were measured. With Color and Color difference meter, L, a ana b were measured. The results were as follows: 1. Sensory evaluation indicated that with the increase of starch addition, the Angdo Pyun maintained a worse apperance and got hardened and thickened. As the amount of suger increased, the Angdo fyun maintained better in color and flavor as well as its acceptability. 2. Rheometer measurement indicated that a compression force, work ratio, adhesive work and gumminess tended to increase, as the starch proportion increased. As the amount of sugar increased, the Angdo Pyun maintained a greater adhesive work, work ratio and gumminess. 3. Color and Color difference meter indicated that figure L ana a tended to increase and b, ΔE and ΔC decrease, as the starch proportion increased. 4. In the analysis of correlation between hardness and compression force, it was found that they are highly related. In view of the above results, it came to the conclusion that Angdo Pyun with the addition of 30％ sugar and 15％ starch could give the best result among the groups studied.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.8
• /
• pp.1274-1283
• /
• 2005

The sensory acceptability, texture profile analysis and nutritional evaluation were peformed in Korean traditional mungbean pancake (MPC) and modified MPC containing squid meat and soybean to standardize the recipes for healthy fast food market potentiality. Optimal ingredient formulations were revealed as mung-bean 55$\%$, pork 13$\%$ and vegetables 32$ \%$ for traditional MPC, and pork 3$\%$, squid 42$\%$ and soybean 55$\%$ for modified MPC using response surface methodology. Flavor and hardness correlated highly with overall accept-ability rather than appearance and color of traditional MPC. Higher squid levels raised adhesiveness, springi-ness and resiliences of modified MPC, but soybean decreased these textural attributes. Protein, lipid and total calorie of modified MPC were lower than those of traditional MPC. Computed protein efficiency ratio (C-PER) and degree of gelatinization of modified MPC were superior than traditional MPC.

• Journal of agriculture & life science
• /
• v.46 no.6
• /
• pp.97-104
• /
• 2012

The aim of this study was to investigate the quality properties of beef jerky replaced salt (NaCl) with red pepper paste, soy sauce and soybean paste. The quality properties of beef jerky including water activity ($a_w$), pH, moisture content, protein content, color, shear force, texture profile analysis and sensory evaluations were investigated. The sliced beef samples were marinated at salt (control), soybean paste (T1), soy sauce (T2) and red pepper paste (T3) for 24 h and then dried at $70^{\circ}C$ for 8 h. The $a_w$ and moisture content varied from 0.88 to 0.79 and from 28.87% to 22.98%, respectively. All treatment samples showed higher final $a_w$ and moisture content than the control sample after drying for the 8 h (p<0.05). The protein content of T2 and T3 samples were lower than the control. Also, shear force and hardness value of all treatment samples had lower than the control (p<0.05). However, all treatment samples showed lower saltiness intensity than the control sample. Sensory panelists recorded greater flavor and texture scores to the samples with soy sauce replacement. Therefore, sensory panels found that the T2 samples had better overall acceptability scores than the other beef jerky samples (p<0.05).

• Korean Journal of Soil Science and Fertilizer
• /
• v.40 no.5
• /
• pp.418-428
• /
• 2007

Physical and chemical properties of the aggregate by-products including sludge and crushed dust samples collected from the 21 private companies throughout the country were analyzed to evaluate possible usage of the by-products as artificial soil materials for plantation. The pH of the materials ranged from 8.0 to 11.0. The organic matter content was $2.85g\;kg^{-1}$, and the total nitrogen content and available phosphate content were low as 0.7 percents and $12.98mg\;kg^{-1}$, respectively. Exchangeable $Ca^{2+}$, $Mg^{2+}$, $K^+$, and $Na^+$ were 2.29, 0.47, 0.02 and $0.05cmol\;kg^{-1}$, respectively. Heavy metal contents were lower than the limits regulated by environmental law of Korea. Textural analysis showed that most of the materials were silt loam with low water holding capacity ranged from 0.67 to 7.41 percents, and with low hydraulic conductivity ranged from 0.4 to $2.8m\;s^{-1}$. Mineralogical analysis showed that the aggregate by product materials were mostly composed of silicate, alumina and ferric oxides except calcium oxide dominant materials derived from limestones. The primary minerals were quartz, feldspars and dolomites derived from granite and granitic gneiss materials. Some samples derived from limestone material showed calcite and graphite together with the above minerals. According to the result, it can be concluded that the materials could be used as the artificial soil material for plantation after proper improvement of the physico-chemical properties and fertility.