• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.3
• /
• pp.36-44
• /
• 2013

This study is focused on the debarking and xylem separation yield of Paper Mulberry. We investigated the most efficient manual on the automatic debarking and xylem separator machine. The bast tissues of Paper Mulberry were separated in three layers including black outer layer, green inner layer, and white inner layer. A target is to save the white inner layer of these three layers as much as possible. The experimental machine most characterize xylem separation and debarking by frictional force between the bulges and Paper Mulberry by the drum rotation. It is possible automatically to operate the machine by controlling the temperature sensor and the time. Debarking process can be know that removed black outer layer has beem accumulate and measured the weight. The content of the extract, holocellulose, lignin and ashes of the white inner layer was analyzed. It is result that conditions of optimum process of the experimental machine is 45 RPM, temperature at $60^{\circ}C$(60 min.) and $80^{\circ}C$(60 min.), mixing bulge of 10 mm(120ea) and 30 mm(120ea) and capacity of Paper Mulberry 10 kg.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.363.2-363.2
• /
• 2016

Stretchable strain sensors are becoming essential in diverse future applications, such as human motion detection, soft robotics, and various biomedical devices. One of the well-known approaches for fabricating stretchable strain sensors is to embed conductive nanomaterials such as metal nanowires/nanoparticles, graphene, conducting polymer and carbon nanotubes (CNTs) within an elastomeric substrate. Among various conducting nanomaterials, CNTs have been considered as important and promising candidate materials for stretchable strain sensors owing to their high electrical conductivity and excellent mechanical properties. In the past decades, CNT-based strain sensors with high stretchability or sensitivity have been developed. However, CNT-based strain sensors which show both high stretchability and sensitivity have not been reported. Herein, highly stretchable and sensitive strain sensors were fabricated by integrating single-walled carbon nanotubes (SWNTs) and nylon textiles via vacuum-assisted spray-layer-by-layer process. Our strain sensors had high sensitivity with 100 % tensile strain (gauge factor ~ 100). Cyclic tests confirmed that our strain sensors showed very robust and reliable characteristic. Moreover, our SWNTs-based strain sensors were easily and successfully integrated on human finger and knee to detect bending and walking motion. Our approach presented here might be route to preparing highly stretchable and sensitive strain sensors with providing new opportunity to realize practical wearable devices.

• Journal of Sensor Science and Technology
• /
• v.29 no.2
• /
• pp.89-92
• /
• 2020

Polytetrafluoroethylene (PTFE) fibers are widely used in the textile industry, filter media, membrane distillation, electronic appliances, and construction. In this study, PTFE-polyethylene oxide (PEO) fibrous membranes were fabricated by emulsion electrospinning; subsequently, pure PTFE nanofibers were obtained via sintering. PTFE-PEO electrospinning solutions were prepared using different weight ratios to determine the optimized condition. As the ratio of the PEO increased, the fiber structure improved. Scanning electron microscopy and Fourier-transform infrared spectroscopy observations indicate that PEO is removed and PTFE fused gradually to form bonds among them during sintering. The obtained pristine PTFE membrane demonstrated hydrophobicity at 143.6° water contact angle and oleophilicity at 0° oil contact angle, which is known to be utilized for oil/water separation. A simple separation experiment was performed to remove oil droplets from water. The PTFE membrane exhibited good chemical stability and a high surface-area-to-volume nanofiber ratio. These excellent properties suggest that it is applicable to oil/water separation in harsh chemical environments.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.107-107
• /
• 2011

최근 IT(Information Technology)가 결합된 스마트 섬유의 수요가 꾸준히 증가하고 있다. 생활수준 향상에 따른 유저들의 청결, 쾌적에 대한 높은 관심속에서 생활 및 의료용 섬유에도 다양한 기능성이 요구되어지고 있다. 초경량, 흡한속건, 투습방수 등 레저 스포츠, 아웃도어 활동에 필요한 고기능성 소재는 제품의 고부가가치를 더하는 가치 상승 요인이긴 하지만 그 기술과 적용성이 이미 포화 상태에 도달했다고 볼 수 있다. 이에 국내 외 섬유 업체들은 스마트 섬유 열풍을 큰 기회로 삼아 헬스케어 기능, 엔터테인먼트 기능 등의 최첨단 기술과 결합되어진 특화된 섬유시장을 통해 더 높은 부가가치를 창출하고 새로운 섬유시장의 도약을 노리고 있다. 이에 본 연구에서는 위치추적이나 동선, 생체적 리듬 등을 파악할 수 있는 스마트 섬유용 전도성 섬유센서의 초기특성(전기적, 물리적 물성)을 유지함과 동시에 심미적인 효과와 새로운 기능성을 부여하기 위하여 전도성 센서소재의 최적 선염공정을 조사하고 외부적인 환경변화를 염두에 두어 그 물성 변화를 측정하였다.

• Annual Conference of KIPS
• /
• 2017.04a
• /
• pp.1131-1134
• /
• 2017

본 연구는 차동 용량형 섬유 압력 센서를 개발하고, 이를 깔창에 부착하여 보행 측정에 응용하는 것을 목적으로 한다. 차동 용량형 섬유 압력 센서는 3장의 전도성 섬유 사이에 2장의 절연체를 위치시키는 형태로, $5cm{\times}5cm{\times}0.23cm$ (가로 ${\times}$ 세로 ${\times}$ 두께) 크기로 제작하였다. 커패시턴스를 측정하기 위해 커패시턴스-디지털 변환칩(AD7152), ATMega328로 구성된 시스템을 제작하였고 PC로 데이터를 전송하여 모니터링을 수행하였다. 센서의 힘-커패시턴스 변화 특성 평가를 위해 센서에 가하는 중량을 65 kg 까지 5 kg 씩 증가시켜 가며 커패시턴스 변화를 측정하였다. 실험 결과, 무게에 따라 커패시턴스가 증가하는 것을 확인하였다. 보행 측정 가능성을 평가하기 위해 센서를 깔창에 부착한 후 보행 신호를 측정하였으며, 그 결과 보행에 따라 센서의 커패시턴스 값이 변화하는 것을 확인하였다. 이로부터 제작한 차동용량형 섬유 센서는 보행 측정에 활용할 수 있는 가능성을 확인하였다.

• Textile Coloration and Finishing
• /
• v.30 no.2
• /
• pp.63-69
• /
• 2018

In this study, we report on successful attempt towards the synthesis of sulfur self-doped $g-C_3N_4$ by directly heating thiourea in air. The synthesized materials were characterized using UV-vis spectral technique, FT-IR, XRD and TEM analysis. Further, the obtained material shows an excellent detection of carcinogenic TNP(Tri nitro phenol) in the presence of 10-fold excess of various other common interferences. The strong inner filter effect and molecular interactions(electrostatic, ${\pi}-{\pi}$, and hydrogen bonding interactions) between TNP and the $S-g-C_3N_4$ Nano sheets led to the fluorescence quenching of the $S-g-C_3N_4$ Nano sheets with an excellent selectivity and sensitivity towards TNP compared to that of other nitro aromatics under optimal conditions and the detection limit calculated was found to be 6.324 nM for TNP. The synthesized nanocomposite provides a promising platform for the development of sensors with improved reproducibility and stability for ultra-sensitive and selective sensing of TNP.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.4
• /
• pp.141-147
• /
• 2016

A direct PM generator has the effect of reducing the mechanical noise and ease of maintenance by eliminating a number of power transmission components. In addition, wind turbines operating at low speed with the advantages of high output, high efficiency, and small size. The generator was designed as a small direct-drive PM generator that can be applied to a kite even at low wind speeds. The RPM (Revolutions Per Minute) of the reel was measured in two ways using a cadence/speedometer sensor and a tachometer while the actual kite. The RPM derived from the experiment was applied to the simulation on the designed generator. The no-load characteristic analysis for the magnetic fields produced for the permanent magnet generator by a permanent magnet and stator winding currents is achieved using a 2D coordinate system. A commercial electromagnetic analysis program, ANSYS Maxwell, was used to model the electromagnetic dynamics.

• Journal of Fashion Business
• /
• v.18 no.3
• /
• pp.134-147
• /
• 2014

The aim of this study is to create smart wear that brings out the perspective person's individuality and creativity wearing these garments through various interactions. It is intended to build a prototype for a "Shape-folding Dress", which is length-adjustable skirt that responses with the environment of the wearer. In this process, four basic physical properties can be identified with fabric samples selected which are relatively stiff, including fusible interlining, organdy, silk, and ramie. In addition, two types of folding pattern specimens, "Basic Pattern" and "Diamond Pattern", and heat-steam were used to make the specimens so that the correlation could be calculated by recovery rate among flexing, stiffness and tensile properties. As a result, compared to other fabrics, the silk showed low stress to repeat folding and unfolding process, and its recovery rate of elongation deformation was stable without being affected by the different folding types and twice repeated process. In this study, forming a circuit using an Arduino, illuminance sensor, motors, and pulley, the prototype was created with a silk fabric.

• Journal of Fashion Business
• /
• v.23 no.1
• /
• pp.103-115
• /
• 2019

In this study, we provided examples of light emitting diodes (LEDS) in everyday sportswear and confirmed their usefulness to provide functionality, aesthetics, and entertainment. One type of sports jacket and one set of sportswear were designed and manufactured using LEDs and made available to the general public for use in daily life to provide functionality, aesthetics, and entertainment. To generate digital images, a textural design of a circuit image was developed and applied, and the LEDs were placed on the developed textile in an attempt to merge the LEDs with the design. The product was equipped with a tilt sensor and produced a randomly lighted jacket with LEDs that adjusted according to movement. The LEDs turned on in the desired location by lifting the arm during night sports activities. The tricolor of NEO PIXEL LEDs lit randomly and its rhythmical design could be maximized when moving or exercising outdoors, and also for entertainment. The role of creating interest for lively and unexpected pleasures and the aesthetic beauty of LED lights were also obtained. There was no inconvenience or restriction of movement by LEDs or internal structures using the hot-melting technique, and the removable attachment of the device made it easier to wash.

• Journal of Sensor Science and Technology
• /
• v.27 no.6
• /
• pp.421-426
• /
• 2018

To develop a piezoelectric inkjet printhead for high-resolution and high-speed printing, we studied the characteristics of an inkjet printhead by analyzing the major design parameters. An analytical model for the inkjet printhead was established, and numerical analysis of the coupled first-order differential equation for the defined state variables was performed using state equations. To design the dimension of the inkjet printhead with a driving frequency of 100 kHz, the characteristics of the flow rate and discharge pressure of the nozzle were analyzed with respect to design variables of the flow chamber, effective sound wave velocity, driving voltage, and voltage waveform. It was predicted that the change in the height of the flow chamber does not significantly affect the Helmholtz resonance frequency and discharge speed of the nozzle. From the analysis of change in flow chamber width, it is observed that as the width of the flow chamber increases, the ejection speed greatly increases and the Helmholtz resonance frequency decreases considerably, thereby substantially affecting the performance of the inkjet printhead.