• 비파괴검사학회지
• /
• 제30권6호
• /
• pp.548-557
• /
• 2010

An ultrasonic resonance scattering spectroscopy technique is developed and applied for reconstructing elastic constants of a transversely isotropic cylindrical component. Immersion ultrasonic measurements are performed on tube samples made from a boron/aluminum composite material to obtain resonance frequencies and dispersion curves of different guided wave modes propagating in the tube. Theoretical analysis on the acoustic resonance scattering from a transversely isotropic cylindrical tube is also performed, from which complete backscattering and resonance scattering spectra and theoretical dispersion curves are calculated. A sensitive change of the dispersion curves to the elastic properties of the composite tube is observed for both normal and oblique incidences; this is exploited for a systematic evaluation of damage and elastic constants of the composite tube samples. The elastic constants of two boron/aluminum composite tube samples manufactured under different conditions are reconstructed through an optimization procedure in which the residual between the experimental and theoretical phase velocities (dispersion curves) is minimized.

• 비파괴검사학회지
• /
• 제30권6호
• /
• pp.527-538
• /
• 2010

This paper presents a nondestructive evaluation approach for system identification (SID) of real railway bridges using field vibration test results. First, a multi-phase SID scheme designed on the basis of eigenvalue sensitivity concept is presented. Next, the proposed multi-phase approach is evaluated from field vibration tests on a real railway bridge (Wondongcheon bridge) located in Yangsan, Korea. On the steel girder bridge, a few natural frequencies and mode shapes are experimentally measured under the ambient vibration condition. The corresponding modal parameters are numerically calculated from a three-dimensional finite element (FE) model established for the target bridge. Eigenvalue sensitivities are analyzed for potential model-updating parameters of the FE model. Then, structural subsystems are identified phase-by-phase using the proposed model-updating procedure. Based on model-updating results, a baseline model and a nondestructive evaluation of test bridge are identified.

• 한국주조공학회지
• /
• 제26권2호
• /
• pp.92-97
• /
• 2006

Contact material is widely used as electrical parts. Ag-Cd alloy has a good wear resistance and stable contact resistance. But the disadvantages of Ag-Cd alloy are coarse Cd oxides and harmful metal, Cd. To solve the disadvantages of that, Ag-Sn alloy that has stable and fine Sn oxide at high temperature has been developed. In order to optimize Sn amount that affects the formation of the oxide layer on the surface, we worked for the microstructures and properties of Ag-Sn material fabricated by rapid solidification process. The experimental procedure were melting using high frequency induction, melt spinning, and internal oxidation. We have shown that the optimized Sn amount for high hardness is 7.09 wt%Sn. Surface oxide layer forms when Sn amount is over 9.45 wt%. The size of Sn oxide is 20 nm.

• Communications for Statistical Applications and Methods
• /
• 제12권1호
• /
• pp.101-115
• /
• 2005

We propose in this article a procedure for testing unit and fractional orders of integration, with the roots simultaneously occurring in the trend, the seasonal and the cyclical component of the time series. The tests have standard null and local limit distributions. However, finite sample critical values are computed, and several Monte Carlo experiments conducted across the paper show that the rejection frequencies against unit (and fractional) orders of integration are relatively high in all cases. The tests are applied to the UK consumption and income series, the results showing the importance of the roots corresponding to the trend and the seasonal components and, though the unit roots are found to be fairly suitable models, we show that fractional processes (including one for the cyclical component) may also be plausible alternatives in some cases.

• International Journal of Reliability and Applications
• /
• 제6권1호
• /
• pp.1-12
• /
• 2005

A new test for testing that a life distribution is exponential against the alternative that it is harmonic new better (worse) than used in expectation upper tail HNBUET (HNWUET), but not exponential is presented based on the highly popular 'Kernel methods' of curve fitting. This new procedure is competitive with old one in the sense of Pitman's asymptotic relative efficiency, easy to compute and does not depend on the choice of either the band width or kernel. It also enjoys good power.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.397-400
• /
• 1999

As the result of enhancement of CAD, Design Automation and manufacturing technology, it's on the increasing complexity, integration ratio, data signals, and pin count to IC chips. This brings about difficulties of testing, and incresing test time. Now One of the most cost-consuming procedure as integration ratio increases is the testing step. In this paper, we propose a new method, “Efficient TP(test point) assignment algorithm” using “input grouping”, This is helpful method to reducing test length without losing fault coverage. Experimental results show that proposed method reduces test length remarkably and doesn't miss fault coverage, with low hardware overhead Increasing.

• 비파괴검사학회지
• /
• 제25권6호
• /
• pp.451-458
• /
• 2005

The effects of fiber orientation on acoustic emission(AE) characteristics have been studied for various composite laminates. Reflection and transmission optical microscopy were used to investigate the damage zone of specimens. AE signals were classified through short time Fourier transform(STFT) as different types: AE signals with a high intensity and high frequency band were due to fiber fracture, while weak AE signals with a low frequency band were due to matrix cracking and/or interfacial cracking. Characteristic feature in the rate of hit-events having high amplitudes showed a procedure of fiber breakages, which expressed the characteristic fracture processes of notched fiber-reinforced plastics with different fiber orientations. As a consequence, the behavior of fracture in the continuous composite laminates could be monitored through nondestructive evaluation(NDE) using the AE technique.

• 응용통계연구
• /
• 제3권1호
• /
• pp.89-103
• /
• 1990

관측치가 불균형을 이룰 때, Nelson(1988)에 의한 균형 관측치에 관한 이론이 확장될 수 있음을 보여 주고 있다. 이 방법을 이용하여 이원 요인 계획법에서의 교호작용항에 대한 통계량을 구하고, 그래프를 이용한 방법을 제시 하였다.

• 응용통계연구
• /
• 제7권2호
• /
• pp.35-51
• /
• 1994

윤리적 또는 경제적 이유 때문에 임상실험(Clinical Trials)의 연구자들은 실험중간에 새로운 치료방법이나 약이 효과가 있는지 또는 해로운지를 반복해서 검정한다. 하지만 각 검정마다 정해진 유의수준을 반복해서 사용하면 전체 유의수준이 상당히 커지게 된다. 임상실험에서 발생하는 이러한 문제를 해결하기 위하여 많은 집단측정검정법 (Group Sequential Testing Procedure)들이 개발되어 왔다. 본 논문에서는 이러한 집단측정검정법들을 간략하게 비교분석하고자 한다.

• Journal of Electrical Engineering and information Science
• /
• 제2권3호
• /
• pp.14-21
• /
• 1997

In delay-optimized designs, timing failures due to manufacturing delay defects are more likely to occur because the average timing slacks of paths decrease and the system becomes more sensitive to smaller delay defect sizes. In this paper, the impact of delay optimized logic circuits on delay fault testing will be discussed and compared to the case for non-optimized designs. First, we provide a timing optimization procedure and show that the resultant density function of path delays is a delta function. Next we also discuss the impact of timing optimization on the yield of a manufacturing process and the defect level for delay faults. Finally, we will give some recommendations on the determination of the system clock time so that the delay-optimized design will have the same manufacturing yield as the non-optimized design and on the determination of delay fault coverage in the delay-optimized design in order to have the same defect-level for delay faults as the non-optimized design, while the system clock time is the same for both designs.