• 디지털융복합연구
• /
• 제15권10호
• /
• pp.233-241
• /
• 2017

본 연구는 중소기업의 기술 사업화 역량에 영향을 미치는 요인들에 대한 연구의 흐름을 다양화하기 위해 중소벤처 기업의 제조 역량과 시험 및 검사 역량이 외부 정보 네트워크의 다양성과 기술 사업화 역량 사이의 관계에 미치는 매개 효과를 실증 분석하였다. IBM SPSS 23을 사용하여 한국의 683개 중소벤처기업에 대해 실시한 최소자승 회귀분석, Sobel 검정과 Baron 및 Kenny 검정 결과를 통해 본 연구는 중소기업의 제조 역량과 시험 및 검사 역량의 역할에 대한 후속 연구에 유용한 세 가지 실증 분석 결과를 제공한다. 첫째, 중소벤처기업의 제조 역량은 중소벤처기업의 외부 정보 네트워크의 다양성이 기술 사업화 역량에 미치는 양(+)의 효과를 부분 매개하는 것으로 분석되었다. 둘째, 중소벤처기업의 시험 및 검사 역량은 이러한 양(+)의 효과를 부분 매개하는 것으로 밝혀졌다. 셋째, 중소기업의 제조 역량과 시험 및 검사 역량은 이러한 양(+)의 효과를 공동으로 부분 매개하는 것으로 분석되었다.

• 한국잠사곤충학회지
• /
• 제34권1호
• /
• pp.72-80
• /
• 1992

These studies were brought about to know how much the elctronic methods of raw silk testing is correct, effective and convenient in the testing process. These effectiveness and convenience for the testing process under the emergency of the automatic system in raw silk inspecting process, the convenience of inspection in crease in it's capability decreasing the necessary working members, but as certain defect, the corresponding time span needs more than the former case in kind. Judging from the above mentioned carefully, it is necessary or even immidiate for participants to deeply study and search in earnest as well, before adopting the so called International Method of Raw Silk Test and Classification which was proposed by S.S.C in 1990.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2006년도 하계학술대회
• /
• pp.241-245
• /
• 2006

In the examination of Steam Generator (SG) tube in Nuclear Power Plant (NPP) Eddy Current Testing (ECT) probes play an Important role in detecting the defects. Bobbin probe and Rotating Pancake Coil (RPC) probe is usually used for the inspection of SG tube. Bobbin probe is good at high speed inspection, but ability of detection of circumferential defect is very weak. On the contrary RPC probe, which moves for inspection in the direction of axial and circumferential simultaneously, has very slow inspection speed, but it was excellent detection capability fur small cracks, which is hardly detected by bobbin probe. Many examinations of SG tube examination of NPP are achieved during short period. Therefore, solution about this must develop probe of new form for examination performance and examination time shortening of other probe. In this paper, analyzed technological present condition of Bob-bin probe and RPC probe been using in Nondestructive Testing (NDT) for SG tube defect detection and Appeared about background theory and view of developed probe newly.

• 비파괴검사학회지
• /
• 제30권3호
• /
• pp.207-211
• /
• 2010

In this paper, the fluid AID(acoustic inspection device) was developed to measure SOS(speed of sound) since fluids used in most of industrial fields have different properties and its equipment is highly expensive. From AID developed, it is intended to get potentially the capability to distinguish the kind of fluid using the measurement by the SOS at various fields. In order to measure the sound speed of specific fluids, the measurement system and ultrasonic sensors are composed. The fluid used in the experimental work are soybean oil, glycerin, diesel oil and the error of time difference due to the container wall is extracted for preliminary experiment. As results, the variations of sound speed according to the temperature change of target fluid were analyzed and the polynomial equations were proposed.

• 비파괴검사학회지
• /
• 제26권3호
• /
• pp.153-161
• /
• 2006

A simulation program SIMULTSONIC is under development at CNDE to help determine and/or help optimize ultrasonic probe locations for inspection of complex components. SIMULTSONIC provides a ray-trace based assessment for immersion and contact modes of inspection. The code written in Visual C++ operating in Microsoft Windows environment provides an interactive user interface. In this paper, a description of the various features of SIMULTSONIC is given followed by examples illustrating the capability of SIMULTSONIC to deal with inspection of canonical objects such as pipes. In particular, the use of SIMULTSONIC in the inspection of very thin-walled pipes (with 450 urn wall thickness) is described. Ray trace based assessment was done using SIMULTSONIC to determine the standoff distance and the angle of oblique incidence for an immersion mode focused transducer. A 3-cycle Hanning window pulse was chosen for simulations. Experiments were carried out to validate the simulations. The A-scans and the associated B-Scan images obtained through simulations show good correlation with experimental results, both with the arrival time of the signal as well as with the signal amplitudes.

• International Journal of Reliability and Applications
• /
• 제5권1호
• /
• pp.25-36
• /
• 2004

Ultrasonic inspection system consist of the examination procedures, equipment, and operators. The reliability of nondestructive testing is influenced by the inspection environment, materials and types of defect. It is very difficult to estimate the reliability of NDT due to the various factors. Piping inspection round robin was conducted to quantify the capability of ultrasonic inspection during in-service. In this study, the models for predicting the ultrasonic NDE reliability by logistic model and linear regression model are discussed. The utility of the NDT reliability assessment is verified by the analysis of the data from round robin test with these models.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.553-560
• /
• 2001

Recently, ultrasonic testing simulation has becomes very important in the field of nondestructive evaluation due to its unique capability of providing testing signals without real inspection. The ultrasonic testing simulation requires three elementary models including the transducer beam radiation model, the flaw scattering model, and the reception model. In the present work, we briefly describe an approach to develop the ultrasonic testing model together with its elementary models with the multi-gaussian beam model. Based on this approach, we developed ultrasonic testing simulation program with MATLAB. The performance of the developed program is demonstrated by the predicting of ultrasonic signals from two types of flaws, circulars crack and spheres.

• 비파괴검사학회지
• /
• 제22권3호
• /
• pp.261-266
• /
• 2002

현재까지 검사를 목적으로 하는 배관 검사용 로봇에 관한 많은 연구가 소개되어 왔다. 그러나 지하매설 배관의 복합한 배관 요소 내에서 주행 할 수 있는 충분한 이동성을 갖추고 있는 로봇을 개발한다는 것은 여전히 어려운 것처럼 보인다. 배관 검사에 사용하기 위한 로봇은 수평관 및 수직관과 같은 기본적인 배관요소 내에서 자유롭게 주행해야 한다. 더불어 축소관이나 곡관에서 주행 할 수 있고 특히 분기관에서 조향 능력은 필수적이다. 본 논문에서는 배관 검사 로봇의 개발에 있어 필수적인 요소와 기술이 소개되며 지난 수년간 연구를 통하여 개발한 배관검사 로봇이 소개된다.

• 비파괴검사학회지
• /
• 제26권6호
• /
• pp.411-416
• /
• 2006

The critical subject of transverse crack detection in a rail head is treated in this paper. Conventional bulk wave ultrasonic techniques oftenfail because of shelling and other surface imperfections that shield the defects that lie below the shelling. A guided wave inspection technique is introduced here that can send ultrasonic energy along the rail under the shelling with a capability of finding the deleterious transverse crack defects. Dispersion curves are generated via a semi analytical finite element technique along with a hybrid guided wave finite element technique to explore the most suitable modes and frequencies for finding these defects. Sensor design and experimental feasibility experiments are also reported.

• 비파괴검사학회지
• /
• 제36권2호
• /
• pp.155-159
• /
• 2016

Eddy current testing (ECT) is an important nondestructive testing technology for the inspection of flaws in conductive materials. However, this widely used technology is not suitable for inspecting lamination when a conventional pancake coil is used because the eddy current (EC) generated by the pancake coil is parallel to the lamination and will not be perturbed. A new method using a rectangular coil placed vertical to the work piece is proposed for lamination detection. The vertical sections of the rectangular coil induce ECs that are vertical to the lamination and can be perturbed by the lamination. A parametric study of a rectangular coil by finite element analysis was performed in order to examine the capability of generating vertical EC.