• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.623-629
• /
• 2002

The spectrum of impulse response signal from an impulse hammer testing is widely used to obtain frequency response function(FRF) of the structure. However the FRFs obtained from impact hammer testing have not only leakage errors but also finite record length errors when the record length for the signal processing is not sufficiently long. The errors cannot be removed with the conventional signal analyzer which treats the signals as if they are always steady and periodic. Since the response signals generated by the impact hammer are transient and have damping, they are undoubtedly non-periodic. It is inevitable that the signals be acquired for limited recording time, which causes the finite record length error and the leakage error. In this paper, the errors in the frequency response function of multi degree of freedom system are formulated theoretically. And the method to remove these errors is also suggested. This method is based on the optimization technique. A numerical example of 3-dof model shows the validity of the proposed method.

• 복합신소재구조학회 논문집
• /
• 제1권1호
• /
• pp.34-45
• /
• 2010

This paper describes the design, manufacturing process, testing, application, and assessment of capacity-ratings of the first all advanced composites bridge on a public highway system. In order to verify the bridge design prior to the field application, a sub-scale bridge superstructure was built and tested in the laboratory. The field load test results were compared with those of the finite element analysis for the verification of validity. To investigate its in-service performance, field load testing and visual inspections were conducted under an actual service environment. The paper includes the presentation and discussion for advanced composites bridge capacity rating based on the stress modification coefficients obtained from the test results. The test result indicates that the advanced composites bridge has no structural problems and is structurally performing well in-service as expected. Since these composite materials are new to bridge applications, reliable data is not available for their in-service performance. The results may provide a baseline data for future field advanced composites bridge capacity rating assessments and also serve as part of a long-term performance of advanced composites bridge.

• 영어어문교육
• /
• 제16권4호
• /
• pp.153-184
• /
• 2010

On the bases of the 5 principles and the 4 criteria for designing and developing of the listening and the reading test of National English Ability Test (NEAT), this study presents Item-Types Decision-Making Model as a blueprint for designing and constructing the two tests. It sets up the criteria for validating item types, designs a modular type of test specifications, constructs an item-types bank, and specifies a complementary type of test specifications of the two tests. To gather all these threads up, it constructs Item-Types Decision-Making Model which consists of such components as the item-type pool, the validity criteria and the procedures of testing item types, the item-types bank, the modular and the complementary type test specification. Thus, it shows how the Model works in developing and constructing the two level-differentiated listening and reading tests (the 2nd and the 3rd rank) of NEAT. Finally, it discusses some implications and applications of the Model to the two level-differentiated tests (the A and the B type) of 2014 CSAT (College Scholastic Ability Test) systems, National Assessment of Educational Achievement (NAEA), and classroom testing. In conclusion, Item-Types Decision-Making Model functions as a testing template in an item development system and as a matrix in an item-types bank system.

• Journal of Information Technology Applications and Management
• /
• 제22권2호
• /
• pp.201-217
• /
• 2015

In this paper, we report computational testing result to examine the validity of firm's bankruptcy risk estimation through quantification of supply chain risk. Supply chain risk in this study refers to upstream supply risk and downstream demand risk, To assess the firm's risk affected by supply chain risk, we adopt unit of analysis as industry level. since supply and demand relationships of the firm could be generalized by the industry input-output table and the availability of various valid economic indicators which are chronologically calculated. The research model to estimate firm's risk level is the linear regression model to assess the industry bankruptcy risk estimation of the focal firm's industry with the independent variables which could quantitatively reflect demand and supply risk of the industry. The publicly announced macro economic indicators are selected as the candidate independent variables and validated through empirical testing. To validate our approach, in this paper, we confined our research scope to steel industry sector and its related industry sectors, and implemented the research model. The empirical testing results provide useful insights to further refine the research model as the valid forecasting mechanism to capture firm's future risk estimation more accurately by adopting supply chain industry risk aspect, in conjunction with firm's financial and other managerial factors.

• 전자공학회논문지A
• /
• 제33A권2호
• /
• pp.173-183
• /
• 1996

In this paper, a new structure that can do fault detection and location of digial logic circuits more efficiently using current testing techniques is proposed. In the conventional method, observation point for steady state power supply current was only one, but in the proposed method more fault classes are divided for fault detection and location through the ovservation of steady state power supply current at two points. Also, it is shown that this structure can be easily applied in detection of stuck-open fault which is not easy to do testing with conventional current testing techniques. In the presented mehtod, an extra trasnistor is used, and current path is made compulsorily in the CMOS circuits in which no current path can be established in steady state, then it can be known that stuck-open tault is in the MOS transistor on the considering current path, if this path disappears due to stuck-open fault. The validity and the effectiveness is shwon, thorugh the SPICE simulation of circuits with fault and the current path search experiment using current path search program based on transistor short model wirtten in C language on SUN sparc workstation.

• 한국소음진동공학회논문집
• /
• 제12권9호
• /
• pp.702-708
• /
• 2002

The spectrum of impulse response signal from an impulse hammer testing is widely used to obtain frequency response function(FRF). However the FRFs obtained from impact hammer testing have not only leakage errors but also finite record length errors when the record length for the signal processing is not sufficiently long. The errors cannot be removed with the conventional signal analyzer which treats the signals as if they are always steady and periodic. Since the response signals generated by the impact hammer are transient and have damping, they are undoubtedly non-periodic. It is inevitable that the signals be acquired for limited recording time, which causes the errors. This paper makes clear the relation between the errors of FRF and the length of recording time. A new method is suggested to reduce the errors of FRF in this paper. Several numerical examples for 1-dof model are carried out to show the property of the errors and the validity of the proposed method.

• 오토저널
• /
• 제14권1호
• /
• pp.25-37
• /
• 1992

Interior noise in a car is known to have an important influence on product acceptability. This noise is closely correlated with structural-acoustic vibration. When considering noise problem, the structural-acoustic relation of a vehicle cabin model needs to be identified. However, it is very difficult to get the modal parameters of this kind of cabin structure composed of thin plates: because it not only can be excited by the acoustic vibration of cavity, but also tends to have decoupling effects of one plate from another. In order to obtain modal parameters more precisely, various excitation techniques, i.e. impact, pure random, burst random, and swept sine testing are applied for the first step. In the case of the cabin model, impact and swept sine testing show good results. Next, the determination of the excitation point by trial- and-error and the accurate measurements of FRF's are performed with these methods. The modal parameter extraction is carried out for the final step. This paper proposes a new approach to find the modal parameters more reliably in the case of high decoupling effects. That is, the convergence of MIF and MCF in each panel, which provide some criteria for the validity of the obtained modal parameters, is observed. And from those results, the pretty accurate modal parameters can be determined. A comparative assessment between the modal testing and the FEM is also performed.

• 동력기계공학회지
• /
• 제7권1호
• /
• pp.68-73
• /
• 2003

The purpose of this study is to develop a new proportional pressure reducing valve and to verify the validity of a new mechanism with pressure control pin. The dynamic characteristics of the object pressure reducing valve was studied by numerical analysis of the mathematical model. Also, static and dynamic characteristics of the new pressure control valve were tested with a testing system based on the test standard.

• 품질경영학회지
• /
• 제19권2호
• /
• pp.138-144
• /
• 1991

In this paper, we suggest the test statistic based on the total time on test (TTT-) transtorm for testing exponentiality against new better than used in convex ordering (NBUC) and its dual, new worse than used in convex ordering (NWUC). The validity of the test is examined by simulation for some alternative distributions when the sample size is n = 10 and n = 20.

• 소음진동
• /
• 제2권1호
• /
• pp.61-66
• /
• 1992

In general, structures have various joints such as bonded joint, bolted joint, bearing joint and welded joint. Dynamic modelling of such joints has been the current topic of interest. In this study, the dynamic modelling of plate structures with bonded joint was investigated by using modal testing, sensitivity analysis and condensation-inverse condensation method of FEM. A proper modelling procedure was proposed and the validity was verified.