• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.4
• /
• pp.50-56
• /
• 2010

Supervisory Control and Data Acquisition Systems (SCADAs) is real-time monitor and control systems. SCADA systems are used to monitor or control chemical and transportation processes, in municipal water supply systems, electric power generation, transmission and distribution, gas and oil pipelines, and other distributed processes. SCADA refers to a large-scale distributed system. The supervisory control system is placed on top of a real time control system to control external processes. Emerging security technologies and security devices are decreasing the vulnerability of the power system against cyber threats. Dealing with these threats and analyzing vulnerabilities is an important task for equipment such as RTU, IED and FEP. To reduce such risks, we develop such a SCADA testbed. This paper presents the development of a testbed designed to assess the vulnerabilities SCADA networks(including serial communication).

• Journal of Korean Society for Quality Management
• /
• v.49 no.4
• /
• pp.505-525
• /
• 2021

Purpose: The purpose of this study was to investigate factors influencing the intention to use Fintech Digital Sand(D-Testbed), which facilitate digital innovation in the financial sectors and allow fintech startups to simulate the PoC their innovative ideas before starting a business. Methods: This study used the Extended Technology Acceptance Model (TAM2), with independent variables such as social influence, personal innovativeness, service quality, relative advantage, and security concerns used in previous studies, for analysis. For mediator variables, the perceived usefulness and perceived ease of use were used in this study. Results: The results indicated that social influence and perceived usefulness have a positive effect on the intention to use. It was also analyzed that relative advantage has a mediating effect on perceived usefulness whereas service quality nor personal innovativeness are not statistically significant mediation. On the other hand, perceived ease of use on the intention is not statistically significant. By this, it was confirmed that the intention to use Fintech Digital Sand(D-Testbed) was to improve the business performance of fintech companies, but not because it was easy to learn and take less effort. Conclusion: The finding of the study provides valuable implications for invigorating the use of fintech digital sandbox(D-testbed) and identifying the factors that affect the perception and intention to use among employees in fintech companies in advance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.7
• /
• pp.904-913
• /
• 2020

As the data volumes and complexity rapidly increase, data-intensive science handling large-scale scientific data needs to investigate new techniques for intelligent storage and data distribution over networks. Recently, Named Data Networking (NDN) and data-intensive science communities have inspired innovative changes in distribution and management for large-scale experimental data. In this article, analysis on NDN testbeds for large-scale scientific data such as climate science data and High Energy Physics (HEP) data is presented. This article is the first attempt to analyze existing NDN testbeds for large-scale scientific data. NDN testbeds for large-scale scientific data are described and discussed in terms of status, NDN-based application, and features, which are NDN testbed instance for climate science, NDN testbed instance for both climate science and HEP, and the NDN testbed in SANDIE project. Finally various issues to prevent pitfalls in NDN testbed establishment for large-scale scientific data are analyzed and discussed, which are drawn from the descriptions of NDN testbeds and features on them.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.3
• /
• pp.309-315
• /
• 2015

This paper presents a lower-limb exoskeleton testbed and its control method. An exoskeleton is a wearable robotic system that can enhance wearer's muscle power or assist human's movements. Among a variety of its applications, especially for military purpose, a wearable robot can be very useful for carrying heavy loads during locomotion by augmenting soldiers' mobility and endurance. The locomotion test on a treadmill was performed up to maximum 4km/h walking speed wearing the lower-limb exoskeleton testbed with a 45kg backpack load.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.11
• /
• pp.1155-1164
• /
• 2008

Supervisory control theory, which was first proposed by Ramadge and Wonahm, is a well-suited control theory for the control of complex systems such as semiconductor manufacturing systems, automobile manufacturing systems, and chemical processes because these are better modeled by discrete event models than by differential or difference equation models at higher levels of abstraction. Moreover, decentralized supervisory control is an efficient method for large complex systems according to the divide-and-conquer principle. Decentralized supervisors cannot observe the events those of which occur only within the other supervisors. Therefore decentralized supervisors can be designed according to supervisory control theory under partial observation. This paper presents a solution and a design procedure of supervisory control problem (SCP) for the case of decentralized control and SCP under partial observation (SCPPO). We apply the proposed design procedure to an experimental CIM Testbed. And we compare and analyze the designed decentralized supervisors and partially observed supervisors.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.6
• /
• pp.566-573
• /
• 2004

This paper describes the ubiquitous home network (uHome-net) testbed and LonRF intelligent devices based on LonWorks technology. These devices consist of Neuron Chip, RF transceiver, sensor, and other peripheral components. Using LonRF devices, a home control network can be simplified and most devices can be operated on LonWorks control network. Also, Indoor Positioning System (IPS) that can serve various location based services was implemented in uHome-net. Smart Badge of IPS, that is a special LonRF device, can measure the 3D location of objects in the indoor environment. In the uHome-net testbed, remote control service, cooking help service, wireless remote metering service, baby monitoring service and security ＆ fire prevention service were realized. This research shows the vision of the ubiquitous home network that will be emerged in the near future.

• Korean Journal of Digital Imaging in Medicine
• /
• v.11 no.2
• /
• pp.79-84
• /
• 2009

Recently, there has been a rapid increase of interest in u-Health systems or instruments. The importance of testbeds has been discussed deeply also. However, beyond laboratory or ward environments, testbeds covering metropolitan area cannot be found easily. Moreover, there has been few papers which discuss the results of testbed operations for various instruments in different age groups. In this paper, the results of testbed which operated in Daegu metropolitan area are discussed and improvement directions to strengthen the competitiveness are proposed using user analysis. In particular, the results of trial services using the u-Life support instruments (medication reminder, falling safety phone, bio-patch and shirts, etc) for super aging societies in the near future are discussed.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2004.12a
• /
• pp.9-13
• /
• 2004

텔레매틱스는 정보통신 분야에서 신성장동력 과제 하나로 국내외적으로 사업경쟁력 확보가 가능한 기술이다. 본연 구에서는 이러한 텔레매틱스를 위한 단말기 시스템 환경을 구축하는데 있어서, 핵심적 역할을 가지는 텔레매틱스 단말 S/W 플랫폼을 위한 표준 아키텍쳐 및 API 설계를 목적으로 한다 이는 OSGi 와 AMI-C 등의 국제 표준 규격을 고려한 국제적 호환성 확보 및 국내의 여러 업체들의 상호 운영성을 확보 할 수 있는 표준화된 아키텍쳐 설계를 주요 목표로 하고 있다. 이는 국내 시장뿐만 아니라, 국제적으로 부재한 플랫폼 아키텍쳐 설계 및 API 개발을 통한 국제경쟁력 강화에 큰 도움이 될 것으로 판단된다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.27 no.3
• /
• pp.206-213
• /
• 2022

This paper presents setting up a laboratory-scale testbed to estimate the aging of power MOSFET devices and integrated power modules by measuring its on-state voltage and current. Based on the aging mechanisms of the component inside the power module (e.g., bond-wire, solder layer, and semiconductor chip), a system to measure the on-state resistance of device-under-test (DUT) is designed and experimented: a full-bridge circuit applies current stress to DUT, and a temperature chamber controls the ambient temperature of DUT during the aging test. The on-state resistance of SiC MOSFET measured by the proposed testbed was increased by 2.5%-3% after 44-hour of the aging test.

• Journal of Korea Multimedia Society
• /
• v.25 no.8
• /
• pp.1085-1096
• /
• 2022

The manufacturing industry is continuously pursuing advanced technology and smartization as it converges with innovative technology. Improvement of manufacturing productivity is achieved by monitoring, analyzing, and controlling the facilities and processes of the manufacturing site in real time through a network. In this paper, we proposed a new OPC-UA based digital twin model for smart factory facilities. A testbed system for USB flash drive packaging facility was implemented based on the proposed digital twin model and OPC-UA data communication scheme. Through OPC-UA based digital twin model, equipment and process status information is transmitted and received from PLC to monitoring and control 3D digital models and physical models in real time. The usefulness of the developed digital twin testbed system was evaluated through usability test.