• Journal of Mushroom
• /
• v.14 no.3
• /
• pp.119-126
• /
• 2016

Five empirical farmhouses were selected to reduce the high temperature damage in oak mushroom cultivation using bed-logs. The cultivation facilities were categorized as follows: those having two blackout curtains or one blackout curtain and outdoor oak mushroom cultivation. The inequality of the indoor condition, oak mushroom hyphae rampant ratio, and fruit body production in each test condition was evaluated. $3^{\circ}C$ was lower in indoor temperature of cultivation facility having two blackout curtains than one blackout curtain. Specifically, the indoor air humidity average of cultivation facilities having one or two blackout curtains was 10% lower than that of outdoor oak mushroom cultivation. This condition is not ideal for oak mushroom cultivation as continuous indoor humidity control is essential for producing good fruit bodies. The Inoculated bed-log surface and oak mushroom hyphae rampant ratio of bed-logs cultivated with two blackout curtains was superior to other tested conditions. The mushroom production ratio observed in facilities with two blackout curtains was 117-204% higher than those cultivated in facilities with only one blackout curtain. Furthermore, the mushroom production ratio increased in based on these findings, we recommended five cultivation facility models to reduce high temperature damage in oak mushroom cultivation using bed-logs.

• Applied Chemistry for Engineering
• /
• v.21 no.5
• /
• pp.553-558
• /
• 2010

To solve the problems of the low combustion activity of Korean anthracite and the abundant loss of unburned carbon in fly ash, pellet coal was fabricated from coal fines and fly ash, and the mixed combustion of coarse coal with the pellet coal was examined in the circulating fluidized bed combustor of a 0.1 MW scale test unit. In the combustion of the raw coal only, the significant amount of coal fines was entrained, resulting in overheat at the top of the combustor. With the coarse coal that most fines were eliminated, however, the combustion temperature was maintained stable. The mixed combustion of coarse and raw coals was also feasible even though it often went unstable. The mixed combustion of the coarse coal with the pellet coal was as stable as the coarse coal combustion, showing a promise that the combustion of the Korean anthracite in commercial circulating fluidized bed boilers could be further enhanced.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.12
• /
• pp.1742-1746
• /
• 2014

In order to develop a overhead catenary system for the maximum speed of 400 km/h on Honam high-speed line, increasing tension of contact wire, changing dropper distributions, reducing a hard point and etc. should be considered. And it is also essential to develop core components taking account of the increased tension. Therefore we developed a new steady arm for the max. speed of 400 km/h in this study. FEM (Finite Elements Method) analysis was performed to ensure the strength of the arm. An oval shape was applied to the arm, so that 25 % of strength was increased and 9 % of weight was decreased. And a type test according to the code KRSA-3012 was performed to ensure the performance. Fatigue test in KRRI (Korea Railroad Research Institute)'s test-bed was also performed to evaluate its performance. Some section of the Honam High-speed line was constructed with the developed steady arm.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.9
• /
• pp.1398-1405
• /
• 2015

Domestic railway communication in Korea has been introduced for mutual communications among control center, operation staffs, and maintenance staffs. It has been mainly used as railway disaster and safety functions from VHF and UHF from 1980’s and TRS-Astro and TRS-Tetra from the 2000’s. Recently for urban railways communications, 18GHz and 2.4GHz ranges have been utilized for image transmissions and control command communications, respectively. This paper analyzes technical development of LTE-R, LTE communication for Railways, that has been designed as a single integrated railway wireless network in order to merge the current various communication systems. In this paper, we present the details of the examination of the LTE-R test-bed using 2.6GHz test frequency in Daebul test line through CW test and optimization test.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.6
• /
• pp.837-847
• /
• 2019

Korea's long underground roads are being promoted around the metropolitan city center to realize advanced transportation networks. Many disaster prevention facilities are applied to secure fire safety of the closed and long-distance underground roads. As the facility response and fire suppression subjects are unclear, additional human and material damages from fire spread are inevitable. Therefore, in this study, we developed a remote automatic fire extinguishing system that uses the fire extinguishing water inside the fire hydrant to monitor the CCTV in the management room and sprays it directly to the fire site through automatic control. The design application method was studied through the performance improvement that can be put into practical use.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.11
• /
• pp.1092-1100
• /
• 2011

A C-band ground-based rotational SAR system is presented in this paper. The rotaional SAR system is a test-bed for future rotational SAR systems which can be deployed in space and on a tower. The test-bed system is designed for imaging the electromagnetic scattering from earth surfaces and buried targets. This paper also presents the examination results of the generated SAR images. This rotational SAR system is basically consisted of the network-analyzer based HPS(Hongik Polarimetric Scatterometer) and a horizontally rotating arm. Several SAR images were obtained using the rotational SAR system for various target areas. To verify this system, we simulated the SAR images for the rotational SAR using the FDTD algorithm and compared between the measured and simulated SAR images. The rotational SAR system is operated at the center frequency of 5 GHz and various frequency bandwidth within 0.5~2 GHz to change the resolution of SAR images.

• Journal of Advanced Navigation Technology
• /
• v.16 no.1
• /
• pp.1-7
• /
• 2012

In this research, a single-axis attitude control test bed is developed, and simulation and tests experiments are performed, as a preliminary research of a quad-rotor aerial vehicle development. A single-axis test bed with seesaw configuration is manufactured using two motors and propellers, and the aerodynamic parameters are derived by thrust tests. The response of the system is estimated with Matlab/Simulink, and experiments are performed with attitude control computer and an attitude sensor onboard the test bed. Comparing the results of simulated and tested data, factors of steady-state errors during experiments are found, and performances of used attitude control algorithm and the control computer were verified. In these process, essential preliminary data for attitude control of a quad-rotor unmanned aerial vehicle were acquired.

• Journal of Ocean Engineering and Technology
• /
• v.31 no.4
• /
• pp.308-314
• /
• 2017

The purpose of this study was to investigate the sea floor using a seismic profiler in the northern part of Chagwi-do of Jeju Island in order to select the optimal location for the 60-m-class berth of a sea test bed for wave energy converters and provide basic environmental data for designing a suction anchor. The echo types of the seismic profiles were classified based on the study of Kim et al. (2016a), and the location for installing the suction anchor was selected based on a sediment thickness of more than 10 m. The physical properties of the surface sediments were determined by analyzing the sediment samples obtained from 16 grab sample points. Based on the investigation and analysis, we proposed a survey area in the North-Eastern sea as an optimum location for the 60-m-class berth where the suction anchor could be installed.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2000.11a
• /
• pp.91-96
• /
• 2000

A commercial-scale Fluidized Bed Incinerator(FBI) to treat dewatered sludges has been developed by Jindo Corporation, Korea, as one of the governmental R&D project during 1990 to 1997. The FBI plant was constructed at Kunsan city and fully in operation after finishing the successful test-burn period since June 1998. The company now has a capability of the design, construction and operation of commercial FBI plants. This paper introduces the experiences of design and operation of Kunsan FBI plant, which has the capacity of 60 ton/day and incinerates various sludges from waste water treatment facilities and liquid waste such as waste oil or waste solvent.

• Korean Journal of Adult Nursing
• /
• v.26 no.4
• /
• pp.424-433
• /
• 2014

Purpose: This study was to test the effects of the positional change on low back pain, discomfort, and bleeding complications during the period of bed rest following transarterial chemoembolization (TACE). Methods: The research design for this study was a non-equivalent control group quasi-experimental design. The participants were 23 patients for the experimental group, and 23 patients for the control group. The experimental group received positional change of taking the semi-Fowler's position and the 30-degree lateral position alternatively during the period of bed rest after TACE for 4 hours at one-hour intervals. The control group maintained the supine position continuously during the period of bed rest after TACE. Results: There were statistically significant differences in low back pain and discomfort between the experimental and the control group after intervention. And no significant difference was found in bleeding complication between two groups. Conclusion: The results of the study suggest that the positional change is an effective nursing intervention to reduce low back pain and discomfort without increasing the risk of bleeding after TACE.