• 전자공학회논문지A
• /
• 제33A권2호
• /
• pp.205-216
• /
• 1996

In this paper we propose an efficient robust path delay fault test genration algorithm for detection of path delay faluts in combinational ligic circuits. In the proposed robust test genration approach, the testability measure is computed for all gates in the circuit under test and these computed values are used to genrate weighted random delay test vetors for detection of path delay faults. For genrated robust test vectors, we perform fault simulation on ISCAS '85 benchmark circuits using parallel pattern technqieus. The results indicate that the proposed test genration method not only increases the number of detected robust path delay faults but also reduces the time taen to genrate robust tests.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(2)
• /
• pp.125-128
• /
• 2001

In this paper, we propose a low power Scan-based Built-ln Self Test based on circuit partitioning and pattern suppression using modified test control unit. To partition a CUT(Circuit Under Testing), the MHPA(Multilevel Hypergraph Partition Algorithm) is used. As a result of circuit partition, we can reduce the total length of test pattern, so that power consumptions are decreased in test mode. Also, proposed Scan-based BIST architecture suppresses a redundant test pattern by inserting an additional decoder in BIST control unit. A decoder detects test pattern with high fault coverage, and applies it to partitioned circuits. Experimental result on the ISCAS benchmark circuits shows the efficiency of proposed low power BIST architecture.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(2)
• /
• pp.59-62
• /
• 2000

As the density of memories increases, unwanted interference between cells and coupling noise between bit-lines are increased and testing high density memories for a high degree of fault coverage can require either a relatively large number of test vectors or a significant amount of additional test circuitry. From now on, conventional test algorithms have focused on faults between neighborhood cells, not neighborhood bit-lines. In this paper, a new algorithm for NPSFs, and neighborhood bit-line sensitive faults (NBLSFs) based on the NPSFs are proposed. Instead of the conventional five-cell and nine-cell physical neighborhood layouts to test memory cells, a three-cell layout which is minimum size for NBLSFs detection is used. To consider faults by maximum coupling noise by neighborhood bit-lines, we added refresh operation after write operation in the test procedure(i.e., write \longrightarrow refresh \longrightarrow read). Also, we present properties of the algorithm, such as its capability to detect stuck-at faults, transition faults, conventional pattern sensitive faults, and neighborhood bit-line sensitive faults.

• Parasites, Hosts and Diseases
• /
• 제49권4호
• /
• pp.427-430
• /
• 2011

The aim of this study was to test the susceptibility of mice to Trypanosoma evansi treated with human plasma containing different concentrations of apolipoprotein L-1 (APOL1). For this experiment, a strain of T. evansi and human plasma (plasmas 1, 2, and 3) from 3 adult males clinically healthy were used. In vivo test used 50 mice divided in 5 groups (A to E) with 10 animals in each group. Animals of groups B to E were infected, and then treated with 0.2 ml of human plasma in the following outline: negative control (A), positive control (B), treatment with plasma 1 (C), treatment with plasma 2(D), and treatment with plasma 3 (E). Mice treated with human plasma showed an increase in longevity of $40.9{\pm}0.3$ (C), $20{\pm}9.0$ (D) and $35.6{\pm}9.3$ (E) days compared to the control group (B) which was $4.3{\pm}0.5$ days. The number of surviving mice and free of the parasite (blood smear and PCR negative) at the end of the experiment was 90%, 0%, and 60% for groups C, D, and E, respectively. The quantification of APOL1 was performed due to the large difference in the treatments that differed in the source plasma. In plasmas 1, 2, and 3 was detected the concentration of 194, 99, and 115 mg/dl of APOL1, respectively. However, we believe that this difference in the treatment efficiency is related to the level of APOL1 in plasmas.

• 천문학회보
• /
• 제38권2호
• /
• pp.58.1-58.1
• /
• 2013

The main idea of the Alcock-Paczynski (AP) test is that, if we use a wrong distance-redshift relation to infer the shape of a spherical object in the Universe, this object may look non-spherical. To probe the cosmic expansion history through the AP test, the key point is to find something which is known as spherical in the Universe. We propose two possible ways applying the AP test to the large scale structure (LSS): 1) Based on the observed galaxies or quasars, one built up the beta-skeleton tracing the LSS, and investigating the inhomogeneity of the connections; 2) One reconstructs the smoothed density-contrast gradient field based on LSS observations, and investigating the inhomogeneity of the gradient vectors. Compared with some existed methods probing AP effect through 2-point correlation function, galaxy pairs, or voids, our methods have various advantages: 1) The information of both the high and low dense regions of the LSS are taken into account. 2) The redshift space distortion as the main contamination to the AP effect can be easily removed.

• 대한전자공학회논문지SD
• /
• 제40권1호
• /
• pp.61-71
• /
• 2003

본 논문에서 제안하는 GNS 시퀀스는 SoC 연결 고 장 테스트를 수행할 때 aliasing 고장 증후와 confounding 고장 증후를 고 장 증후를 발생시키지 않는 시퀀스로 연결 고장 위치의 분석을 효과적으로 수행할 수 있다. GNS 시퀀스는 과거 보드 수준의 연결 테스트를 수행하기 위한 IEEE 1149.1 std. 와 유사한 구조로 SoC 의 연결 테스트를 수행하게 되어있는 IEEE P1500 에 적용하여 SoC 내부의 IP 상호간에 존재하는 연결 고장을 검출하고 그 위치를 분석하는데, 이때 입력되는 테스트 시퀀스의 길이가 기른 연구들에 비해 처소의 값을 가짐으로써 연결 테스트 수행 시간을 단축할 수 있는 효과적인 연결 테스트 알고리듬이다.

• 한국응용곤충학회지
• /
• 제62권1호
• /
• pp.43-48
• /
• 2023

본 연구에서는 소나무재선충의 매개충인 솔수염하늘소와 북방수염하늘소에 대하여 무인항공기 (무인헬리콥터)를 이용하여 스피네토람의 약효 및 약해를 조사하였다. 하늘소를 대상으로 등록된 펜토에이트 유제, 비펜트린 액상수화제, 하늘소를 제외한 딱정벌레가 대상인 에토펜프록스 유제, 디플루벤주론 수화제와 나방류에 방제 약제로 등록된 인독사카브 수화제, 스피네토람 액상수화제 6종을 ULV기로 살포하여 솔수염하늘소에 대한 섭식독과 접촉독을 확인한 후 선발하였다. ULV 시험 결과, 펜토에이트, 비펜트린, 인독사카브, 스피네토람의 33배, 55배 희석배수액은 처리후 3일차에 접촉독과 섭식독에서 100% 살충율을 보였으나, 에토펜프록스는 7일차 접촉독 살충율 88.9%(33배), 88.9%(50배), 섭식독 살충율 93.4%(33배, 50배), 디플루벤주론은 7일차 접촉독 살충율 83.3%(33배), 섭식독 80.3%, 53.9%(50배)로 조금 낮은 살충률을 보였다. ULV 시험에서 선발된 가장 적합한 스피네토람의 33배액을 무인항공기로 살포하여 솔수염하늘소와 북방수염하늘소에 대한 감수성을 평가한 결과, 98.6% - 100%의 살충율을 보였다. 그러나, 해당 약제의 매개충 방제에 적용하기 전에 항공 살포에 의한 꿀벌에 대한 위해성 평가가 필요할 것으로 판단되었다.

• 한국음향학회지
• /
• 제35권6호
• /
• pp.501-509
• /
• 2016

본 논문에서는 짧은 테스트 발성에 대한 화자 확인 성능을 개선하는 방법을 제안한다. 테스트 발성의 길이가 짧을 경우 i-벡터/확률적 선형판별분석 기반 화자 확인 시스템의 성능이 하락한다. 제안한 방법은 짧은 발성으로부터 추출한 특징 벡터를 심층 신경망으로 변환하여 발성 길이에 따른 변이를 보상한다. 이 때, 학습시의 출력 레이블에 따라 세 종류의 심층 신경망 이용 방법을 제안한다. 각 신경망은 입력 받은 짧은 발성 특징에 대한 출력 결과와 원래의 긴 발성으로부터 추출한 특징과의 차이를 줄이도록 학습한다. NIST (National Institute of Standards Technology, 미국) 2008 SRE(Speaker Recognition Evaluation) 코퍼스의 short 2-10 s 조건 하에서 제안한 방법의 성능을 평가한다. 실험 결과 부류 내 분산 정규화 및 선형 판별 분석을 이용하는 기존 방법에 비해 최소 검출 비용이 감소하는 것을 확인하였다. 또한 짧은 발성 분산 정규화 기반 방법과도 성능을 비교하였다.

• Transactions on Control, Automation and Systems Engineering
• /
• 제3권4호
• /
• pp.283-288
• /
• 2001

In this paper, we proposed a method for extracting facial characteristics of human being in an image. Given a pair of gray level sample images taken with and without human being, the face of human being is segmented from the image. Noise in the input images is removed with the help of Gaussian filters. Edge maps are found of the two input images. The binary edge differential image is obtained from the difference of the two input edge maps. A mask for face detection is made from the process of erosion followed by dilation on the resulting binary edge differential image. This mask is used to extract the human being from the two input image sequences. Features of face are extracted from the segmented image. An effective recognition system using the discrete wave let transform (DWT) is used for recognition. For extracting the facial features, such as eyebrows, eyes, nose and mouth, edge detector is applied on the segmented face image. The area of eye and the center of face are found from horizontal and vertical components of the edge map of the segmented image. other facial features are obtained from edge information of the image. The characteristic vectors are extrated from DWT of the segmented face image. These characteristic vectors are normalized between +1 and -1, and are used as input vectors for the neural network. Simulation results show recognition rate of 100% on the learned system, and about 92% on the test images.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제56권1호
• /
• pp.63-80
• /
• 2017

By analysing the examination papers from third grade high school students, we classified the errors occurred in the problem solving process of high school 'Geometry and Vectors' into several types. There are five main types - (A)Insufficient Content Knowledge, (B)Wrong Method, (C)Logical Invalidity, (D)Unskilled Expression and (E)Interference.. Type A and B lead to an incorrect answer, and type C and D cannot be distinguished by multiple-choice or closed answer questions. Some of these types are classified into subtypes - (B1)Incompletion, (B2)Omitted Condition, (B3)Incorrect Calculation, (C1)Non-reasoning, (C2)Insufficient Reasoning, (C3)Illogical Process, (D1)Arbitrary Symbol, (D2)Using a Character Without Explanation, (D3) Visual Dependence, (D4)Symbol Incorrectly Used, (D5)Ambiguous Expression. Based on the these types of errors, answers of each problem was analysed in detail, and proper ways to correct or prevent these errors were suggested case by case. When problems that were used in the periodical test were given again in descriptive forms, 67% of the students tried to answer, and 14% described flawlessly, despite that the percentage of correct answers were higher than 40% when given in multiple-choice form. 34% of the students who tried to answer have failed to have logical validity. 37% of the students who tried to answer didn't have enough skill to express. In lessons on curves of secondary degree, teachers should be aware of several issues. Students are easily confused between 'focus' and 'vertex', and between 'components of a vector' and 'coordinates of a point'. Students often use an undefined expression when mentioning a parallel translation. When using a character, students have to make sure to define it precisely, to prevent the students from making errors and to make them express in correct ways.