• Journal of Korean Neurosurgical Society
• /
• v.53 no.2
• /
• pp.102-107
• /
• 2013

Objective : The Leksell Gamma Knife$^{(R)}$ (LGK) is based on a single-fraction high dose treatment strategy. Therefore, independent verification of the Leksell GammaPlan$^{(R)}$ (LGP) is important for ensuring patient safety and minimizing the risk of treatment errors. Although several verification techniques have been previously developed and reported, no method has ever been tested statistically on multiple LGK target treatments. The purpose of this study was to perform and to evaluate the accuracy of a verification method (modified variable ellipsoid modeling technique, MVEMT) for multiple target treatments. Methods : A total of 500 locations in 10 consecutive patients with multiple brain tumor targets were included in this study. We compared the data from an LGP planning system and MVEMT in terms of dose at random points, maximal dose points, and target volumes. All data was analyzed by t-test and the Bland-Altman plot, which are statistical methods used to compare two different measurement techniques. Results : No statistical difference in dose at the 500 random points was observed between LGP and MVEMT. Differences in maximal dose ranged from -2.4% to 6.1%. An average distance of 1.6 mm between the maximal dose points was observed when comparing the two methods. Conclusion : Statistical analyses demonstrated that MVEMT was in excellent agreement with LGP when planning for radiosurgery involving multiple target treatments. MVEMT is a useful, independent tool for planning multiple target treatment that provides statistically identical data to that produced by LGP. Findings from the present study indicate that MVEMT can be used as a reference dose verification system for multiple tumors.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.6
• /
• pp.1277-1282
• /
• 2015

This paper describes a research for improvement official approval of information processing in national technical qualification. In this paper, we analysis the contents of current exams and propose the new evaluation method of practical exam in information processing fields through grafting new trends of ICT and ability unit, fulfillment criteria in national competency standards(NCS). Also, we have verified the effect of exam through the pilot test. In the future, we will apply the new exams after the revision of guidelines for marking questions by expert group in its duty fields basis on this research

• The KIPS Transactions:PartB
• /
• v.17B no.2
• /
• pp.125-138
• /
• 2010

The purpose of this research is to enhance document recognition system which is essential for developing full-text retrieval system of the document image data stored in the digital library of a public institution. To achieve this purpose, the main tasks of this research are: 1) analyzing the document image data and then developing its image preprocessing technology and document structure analysis one, 2) building its specialized knowledge base consisting of document layout and property, character model and word dictionary, respectively. In addition, developing the management tool of this knowledge base, the document recognition system is able to handle the various types of the document image data. Currently, we developed the prototype system of document recognition which is combined with the specialized knowledge base and the library of document structure analysis, respectively, adapted for the document image data housed in National Archives of Korea. With the results of this research, we plan to build up the test-bed and estimate the performance of document recognition system to maximize the utilization of full-text retrieval system.

• Journal of the Korean Society of Radiology
• /
• v.3 no.2
• /
• pp.5-10
• /
• 2009

Myocardial imaging in SPECT (Single Photon Emission Computed tomography) scan of the gamma-ray emitting radiopharmaceuticals to patients after intravenous radiopharmaceuticals evenly spread in the heart region of interest by recording changes in the disease caused by a computer using the PSA test is to diagnose. Containing information on the functional myocardial perfusion imaging is a useful way to examine non-invasive heart disease, but the argument by noise and low resolution of the physical landscape that is difficult to give. For this paper, the level of myocardial imaging by using the three algorithms to split the video into 3-D implementation of the partitioned area to help you read the proposed plan. To solve the difficulty of reading level, interest in using the sheet set, partitioned area of the left ventricle was ranked the partitioned area was modeled as a 3-D images.

• Journal of Soil and Groundwater Environment
• /
• v.21 no.4
• /
• pp.42-49
• /
• 2016

Step-drawdown pumping tests for identifying the improvement of groundwater well performance after rehabilitation treatments were conducted in three longstanding wells. Three selective mechanical treatment methods including power bubble, high-voltage electric pulse, and air surging were applied to these wells and the applicability of these methods to secure additional groundwater resources were evaluated quantitatively. Commonly, drawdown at final stage of stepdrawdown pumping tests after rehabilitation decreased by as much as 0.61~0.70 meters compared to those before rehabilitation. In addition, final specific drawdown values of three wells increased from 9% to 14% after rehabilitation. Formation loss coefficient and well loss coefficient decreased to 6.1% and 60.6%, respectively, indicating some clogging materials by precipitation/corrosion/microbe within pores of aquifer materials, gravel packs, and screens were effectively removed by applied methods. Decrease of formation loss coefficient was higher in the well applied by the power bubble method meanwhile high-voltage electric pulse method demonstrated the higher decrease of well loss coefficient. Additionally secured groundwater amounts after rehabilitation ranged from 23.3 to 32.1 m³/day, which account for 8~16% of initially developed pumping rates of the wells. From the results of this study, the effective selection of rehabilitation treatments considering aquifer characteristics are expected to contribute to secure groundwater resources for irrigation as well as to plan systematic management program for groundwater resources in rural area.

• Journal of Dairy Science and Biotechnology
• /
• v.24 no.1
• /
• pp.1-7
• /
• 2006

This experiment was performed to identify the improvement of raw milk quality after introducing raw milk grading system(1993, June). The purpose of this experiment was to investigate chemical component and microbiological quality of raw milk in jeju. This experiment made it possible to spread high standard of quality of raw milk or milk product including yoghurt, ice cream etc., and to provide dairy industry information for the construction of Jeju international free city master plan. As a result, automatic milking system is improved a lot after introducing raw milk grading system and sustained good condition compared with other provinces. High ratio was shown dairy farm in jeju for pre-milking, pre-cooling system equipment and self laboring. Otherwise, the ratio of dairy farm doing test of mastitis is low. The ratio of first grade distribution in Jeju is 80.64%, which means that was improved before introducing raw milk grading system. The number of somatic cells found in summer more than that of other seasons in raw milk. However, these data is a little higher than the nation wide data medium. Also, general components, annual lipid ratio is 3.90% that improved compared with before introducing raw milk grading system. These data showed low in summer and similar to nation wide.

• Archives of design research
• /
• v.6 no.1
• /
• pp.47-72
• /
• 1993

Nowadays conmpetltlOn of developing new products is getting keen. We can notice that the role and importance of design are emphasized more than ever.The main cause of this tendency is that technical power is no more a factor which secures the superiority in products competition, as technology is gneneralized in the world. Therefore, design is recognized intensely as a competitive strategy to promote competitive power of products. It is an already known fact that the design for both rational function and charming form to satisfy consumer's desires is a short cut to success, when a company develops a new product to promote competitive power in market. The design which plays a leading role in the activity of developing more cnovenient, more economical and more aesthetic products is called 'Competitive Edge' or 'New Corporate Weapon'. Judging form each company's case of developing products, we can guess that it has its own plan and process of developing new products with defferdnl interest and effort. The strategy of developing products is considered as the most important factor that affects the very existence of rhe company. This thesis is composed of six chapters in all. In the firstchapter, I describe the purpose, method, and scope of study.The second chapter includes the image of form in oil fan heater market in nearby Japan and that of interior in our domestic home and shops, and the trend of word life cycle by analyzing circumstances. The third chapter focuses on consumer's attitude. In the fourth chapter, I compare and test current products of competitive companies including Samsung, Daewoo, Shinilwith those of Gold STar. The trend of products, technique, and design which resulted form this comparison is described. In the fifth chapter I explain the strategy, and process of design of oil fan heater in 1992. The last conclusive chapter presents the major point drawed form the case study, but not includes an estimation of products and the condition of market. In this thesis, I reconsider the general understanding of design and designing process and the value of design as a main factor in the strategy of management by investigating the development of products and the strategy of design, and the process of design.

• Journal of Fashion Business
• /
• v.12 no.4
• /
• pp.158-169
• /
• 2008

This study aims to survey the perceptions held by students and field workers regarding the clothing-related qualification certificates, which can serve as the base for becoming clothing professionals, to compare and analyze the actual state of qualification certificates on the basic research level, and thus to search for the directions suitable for the clothing-related qualification certificates. The questionnaire method was selected for the study. The responses of 406 copies from students and 81 copies from field workers were used, and frequency analysis and t-test were done with the assistance of spss 10.0 statistics program, The findings are as follows. First, as to the qualification certificates perceived by the students, the certificates of colorist engineer and colorist industrial engineer were known most. 237 students, or 58.4% of the student respondents, had obtained the information about the qualification certificates mainly through the internet and mass media, and 77.3% of the students had a plan to get the qualification certificates. Second, as to the qualification certificates perceived by the field workers, the respondents indicated that school grades(43.2%) would be given the highest additional points at the time of employment, while the clothing-related qualification certificates gathered low responses of 11.1%. The field workers perceived that the qualification certificate of Western suit engineer(pattern) was needed for the job, while 45.4% of them perceived that no qualification certificate was required for the job. Third, both the students and the field workers showed low acquisition levels of the qualification certificates, and in view of their perceptions that the qualification certificates of languages or computer skills were more useful, the improvement is needed in order for the national certificates for the clothing-related skill qualification to develop in the more job-related directions.

• The Journal of Pediatrics of Korean Medicine
• /
• v.24 no.2
• /
• pp.13-21
• /
• 2010

at Jeonju Wonkwang University Oriental Medicine hospital postpartum care center. Results The majority of women(79.2%) had planned breast-feeding. However, only 32.1% of women currently have fed breast-feeding. 58% of mothers who did partial breast-feeding and breast-feeding currently have planned to breast-feed more than 7 months. The main reason of bottle-fed is concern of insufficient amount of breast milk(72.2%). Also the main reason of breast-feeding is good for baby's health(90%). The average score on the test of the understanding about the methods and advantages of breast-feeding was $13.98{\pm}1.92$ out of total 18.49.1% of women thought that taking herbal medicine would affect baby during breast-feeding. Also 71.7% of women thought that herbal treatments (acupuncture, herbal medicine) would be helpful when the amount of breast milk is insufficient. Conclusions This survey has showed that in spite of full breast-feeding plan, the percentage of actual breast-feeding rate is low. Timely education is needed to increase breast-feeding rate. It is worth to consider herbal treatment to increase breast milk amount. In addition to that it is necessary to create a hospital environment in which mothers can easily begin breast-feeding as soon as possible after delivery. Moreover, beyond the medical field, political and social supports for breast-feeding are needed.

• Environmental Engineering Research
• /
• v.21 no.4
• /
• pp.341-349
• /
• 2016

To improve the utilization rate of construction waste as mine backfilling materials, this paper investigated the feasibility of using recycled powder as mine paste backfilling cementitious material, and studied the pozzolanic activity of recycled construction waste powder. In this study, alkali-calcium-sulfur served as the activation principle and an orthogonal test plan was performed to analyze the impact of the early strength agent, quick lime, and gypsum on the pozzolanic activity of the recycled powder. Our results indicated that in descending order, early strength agent > quick lime > gypsum affected the strength of the backfilling paste with recycled powder as a cementitious material during early phases. The strength during late phases was affected by, in descending order, quick lime > gypsum > early strength agent. Using setting time and early compressive strength as an analysis index as well as an extreme difference analysis, it was found that the optimal ratio of recycled powder cementitious material for mine paste backfilling was recycled powder:quick lime:gypsum:early strength agent at 78%:10%:8%:4%. X-ray diffraction analysis and scanning electron microscope were used to show that the hydration products of recycled powder cementitious material at the initial stages were mainly CH and ettringite. As hydration time increased, more and more recycled powder was activated. It mainly became calcium silicate hydrate, calcium aluminate hydrate, etc. In summary, recycled powder exhibited potential pozzolanic activities. When activated, it could replace cementitious materials to be used in mine backfill.