• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.249-252
• /
• 2005

Recently, as the industrial demand for small quantity batch production of sheet metal components, the application of dieless forming technology to production of these component rise with the advantages of the reduction in manufacturing cost and time. In dieless forming processes, the determination of moving path of tool plays an important role in producing successfully formed parts. In order to obtain the optimized moving path of tool avoiding forming failure, it is necessary to examine the forming limit of sheet material. Therefore, in this study, as the new criterion to evaluate the formability of sheet material in dieless forming processes FDD(feeding depth diagram) with respect to feeding depth and punch diameter is proposed. Thus, the FDD for the sheet materials of STS304 and Ti-grade2 were obtained from a series of FDT(feeding depth test). In addition the possibility of the application of FLD in judging forming severity in dieless forming processes was investigated by comparing the results of FE analyses based on FLD and experimental FDT.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.25 no.6
• /
• pp.36-44
• /
• 2021

Numerical analysis was performed on the shock wave-boundary layer interaction generated in the internal flow path of the curved interstage of the scramjet engine flight test vehicle. For numerical analysis, the turbulence model k-ω SST was used in the compressibility Raynolds Averaged Navier Stokes(RANS) equation. Representatively, the separation bubbles on the upper wall of the nozzle, the interaction between the concave shock wave and the boundary layer, and the shock wave-shock wave interaction at the edge were captured. The analysis result visualizes the shock wave-boundary layer interaction of the curved internal flow path to enhance understanding and suggest design considerations.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.6
• /
• pp.807-814
• /
• 1999

In this paper, it is shown that high frequency current can be controlled to concentrate near the desired path in a conducting plate. A conducting plate is modelled to examine current distribution. And current distribution is analyzed in view of the frequency and geometric characteristics of current path. The high frequency current behavior from the analysis is compared with the experiments. The results, obtained by the experiments of test specimens, are in good agreement with the analytical results.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.5
• /
• pp.749-758
• /
• 1995

There are many testable design techniques, among which Scan path and BIST techniques are mainly used. In this paper, the increase of design effectiveness is discussed, when these techniques are applied to the practical implementation of chips. The following techniques are presented : 1) Blocks are commonly used to reduce test time without hardware increase, 2) MUX is used to implement the shortest Scan path, 3) Scan register is used which controls and/or observes several blocks to avoid the increase of hardware.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2002.11a
• /
• pp.119-120
• /
• 2002

자외선의 영역에서 에너지 흡수를 일으키는 기준 가스들을 측정하는 방법은 여러 가지가 있다. 근래에 이르러 분광학적인 방법으로 이들을 측정하는 시도가 늘어나고 있다. 유럽에서 널리 이용중인 도아즈는 현재는 위성에 응용되어 개발되고 있으며 가스의 파장에 대하여 흡수선을 이용하여 해당가스를 검출해내는 기술을 그 원리로 하고 있다. 지점 측정 방법에 대하여 많은 장점을 가지고 있으나 현재로서는 지속적으로 개발되고 있고 응용 기술의 난해함 등으로 그 응용범위가 한정되어 있다. (중략)

• The Journal of the Acoustical Society of Korea
• /
• v.3 no.1
• /
• pp.25-35
• /
• 1984

This paper analysis the Dynamic Time Warping algorithms for time normalization of speech pattern and discusses the Dynamic Programming algorithm for spoken Korean isolated digits recognition. In the DP matching, feature vectors of the reference and test pattern are consisted of first three formant frequencies extracted by power spectrum density estimation algorithm of the ARMA model. The major differences in the various DTW algorithms include the global path constrains, the local continuity constraints on the path, and the distance weighting/normalization used to give the overall minimum distance. The performance criterias to evaluate these DP algorithms are memory requirement, speed of implementation, and recognition accuracy.

• Journal of International Academy of Physical Therapy Research
• /
• v.4 no.2
• /
• pp.566-572
• /
• 2013

This study aims to compared effect of balance between general walking exercise and power walking exercise. Twenty subjects were classified into two groups, general walking exercise(n=10) and power walking exercise(n=10). As a result, two group showed difference within the group and there is significant difference between two groups. 1) In compared static balance of sway area at pre-post test to exercise group, general walking exercise group did not change significantly. however, power walking exercise group did change significantly. and At sway distance, two group showed significant changes. 2) In compared Static balance between the groups sway area and sway path at pre-post test, two group showed significant changes. 3) In compared dynamic balance of center distance at pre-post test to exercise group, general walking exercise group was no significant difference in all directions. power walking exercise group was significant difference in all directions. 4) In compared dynamic balance between the groups sway area and sway path at pre-post test, there was no significant difference in leftward, rightward, forward directions and was significant difference in backward, overall direction. Therefore, power walking exercise can be recommended promote balance.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.8
• /
• pp.1975-1986
• /
• 1997

Recent evolution of communication networks has led toward increasingly a complex, large-scale protocol. Protocol conformance tests therefore, which consider only control flow, have many problems on testing data flow, transition condition, delay and so on. We propose, design, and implement the tool to solve these problems. The tool, which solves nondeterminism, generates test suites from an integrated flow graph and excludes infeasible path with reachable tree. The presented tool reduces the length of UIO sequence and is efficient partially to test the path that error rate is high. Our automatic test suite generator provides basis of protocol testing environment and high production.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.8
• /
• pp.1615-1622
• /
• 2009

Generally, the Terminal Based Navigation System(TBNS) used embedded road data searches a path that has less qualitative than The Center Based Navigation System(CBNS). TBNS has not used real time road data but it is recently able to use it with technique such as TPEG. However, it causes to increase a cost of exploring by using real time road data for improvement quality of a path, because of limited performance. In this paper, we propose a Dynamic Heuristic to improve quality of path in the TBNS. Dynamic Heuristic(DH) is not fixed data and is dynamically modified using transferred real time road data from server. In this paper, we propose path-lading algorithm with Maximum Speed Dynamic Heuristic (DH-MAX) and do an experiment. The DH-MAX is to be used the highest speed as DH, in real map divided by same size. And proposed algorithm searches path using the priority searching only of the fixed data, but also the highest speed with real time information. In the performance test, the quality of path is enhanced but the cost of searching is increased than A* algorithm.

• Journal of Drive and Control
• /
• v.20 no.4
• /
• pp.27-34
• /
• 2023

Weeding in orchards is closely associated with productivity and quality. The customary weeding process is both labor-intensive and time-consuming. To solve the problems, there is need for automation of agricultural robots and machines in the agricultural field. On the other hand, orchards have complicated working areas due to narrow spaces between trees and amorphous terrain. Therefore, it is necessary to develop customized robot technology for unmanned weeding work within the department. This study developed a path generation and path control method for unmanned weeding according to the orchard environment. For this, the width of the weeding span, the number of operations, and the width of the weeding robot were used as input parameters for the orchard environment parameters. To generate a weeding path, a weeding robot was operated remotely to obtain GNSS-based location data along the superheated center line, and a driving performance test was performed based on the generated path. From the results of orchard field tests, the RMSE in weeding period sections was measured at 0.029 m, with a maximum error of 0.15 m. In the steering period within row and steering to the next row sections, the RMSE was 0.124 m, and 0.047 m, respectively.