• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.404-410
• /
• 2002

Dynamic compaction is an efficient ground improvement technique for loose soils and waste landfill. The improvement is obtained by controlled high energy tamping and its effects vary with the soil properties and energy input. This study demonstrated the application of dynamic compaction method for the improvement of waste landfill in construction site. Various tests and measurements such as standard penetration test, bore hole loading test, crater settlement, ground settlement, pore water pressure were peformed during dynamic compaction field test. From the field test results, the efficiency of dynamic compaction method for the improvement of waste landfill was proved.

• 안보군사학연구
• /
• 통권8호
• /
• pp.383-420
• /
• 2010

This article is focusing on the improvement of weapon system test & evaluation, aimed at the weapon system in the research development stage. This article suggests improvement directions in three aspects(organization and system, skilled manpower and technology, test facilities of weapon system test & evaluation) as follows. 1) Weapon system test & evaluation organization and system a. Establishment of comprehensive test & evaluation system b. Making regulation for comprehensive test infrastructure management. c. Standardization of test & evaluation process, which can be used in special subject to army, navy and air force. 2) Skilled manpower and technology of weapon system test & evaluation a. Training & education, management of test & evaluation experts. b. Establishment of skill management system of test & evaluation. 3) Test facilities of weapon system test & evaluation a. Establishment of comprehensive improvement direction of test & evaluation installation and equipment. b. Consideration of counter measures to prevent overlapping investment, and to use the test & evaluation resources efficiently. c. Establishment of organic network for the effective use of test & evaluation installation and equipment. d. Establishment of detailed cooperation plan for the commonage of test & evaluation facility and equipment.

• 정보처리학회논문지D
• /
• 제14D권1호
• /
• pp.57-66
• /
• 2007

소프트웨어 산업의 발전에 따라 소프트웨어 개발조직에서는 소프트웨어 품질이 중요한 이슈로 부각되었다. 특히 여러 종류의 테스트 성숙도 모델을 통해 조직의 소프트웨어 테스트 성숙도 향상에 대해 다양한 방면으로 시도하고 있다. 하지만 현재 테스트 성숙도를 측정할 수 있는 모델들은 기존의 개발 성숙도 측정 모델을 기반으로 개발하여 테스트 부분에 대한 언급이 부족하고 단지 테스트 성숙도 레벨만을 측정하였다. 이러한 문제점을 해결하기 위해 소프트웨어 개발프로세스와 한께 테스트 프로세스를 수행할 수 있도록 이중 V모델과 테스트 성숙도의 용이한 평가를 위한 테스트 평가 속성과 레벨을 정의한 테스트 속성과 상호관련 매트릭스를 제안하였다. 테스트 프로세스 개선(Test Process Improvement: TPI)의 개선제안(Improvement Suggestion) 방법을 통해 테스트 성숙도 모델 확장하고, 측정된 성숙도를 향상시킬 수 있는 개선방향을 제시한다. 또한, 본 연구에서 제안하는 테스트 성숙도 상호관련 매트릭스는 테스트 성숙도를 정량적으로 평가하기 위해 사용하였다. 결과적으로는 확장된 테스트 성숙도 모델을 통해 조직의 테스트 성숙도를 높이는데 기여 할 수 있으리라 생각한다.

• 시스템엔지니어링학술지
• /
• 제20권spc1호
• /
• pp.1-11
• /
• 2024

Today, the importance of test and evaluation of defense systems is increasing day by day. In performing efficient defense systems test works, process improvement based on quantitative management is essential. The purpose of this paper is to present the results of process improvement for the defense systems test works of the test organization based on quantitative management activities. As a methodology to confirm process improvement performance, the 'MPM(Managing Performance and Measurement)' practice area of the CMMI model was applied. The quantitative management model for defense systems test works was developed so that it could be practically applied not only to the entire test organization but also to the organization at the department level that actually performs the test work. Finally, the application cases of the quantitative management model for defense system test works and the results of process improvement were described.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 춘계학술대회 논문집
• /
• pp.383-389
• /
• 1999

This paper is a study on the improvement effects by quick lime pile through theoretical analysis and in-situ construction test. Effects of strength increase is studied to verify the improvement effects of soft ground arounding quick lime pile. First, engineering characteristics of quick lime and ground was studied, in the second place, laboratory test(consolidation test, triaxial compression test) and in-situ test(portable cone penetration test, vane test) were peformed for verification of strength increase of adjacent ground. Finally, the results of in-situ test were compared with those of theorecal study. From in-situ test results, strength at 28th curing days(6.11-6.55t/㎡) was twice as great as strength before improvement(3.06t/㎡) and was slightly greater than theoretical value(4.95t/㎡).

• 한국환경과학회지
• /
• 제32권1호
• /
• pp.11-24
• /
• 2023

This study aimed to provide preliminary data for the improvement of the tree doctor qualification test (first written test), which was newly created by enforcing the Forest Protection Act on June 28, 2018., The high demand for system improvement accelerated this study. The results were analyzeds through literature and questionnaire surveys. Writing test questions and the license of the tree doctor qualification exam are currently managed by the Korea Forestry Research Institute, and it is deemed that the test should be entrusted to Human Resources Development Service of Korea for fair and transparent management. Additionally, the plan for the improvement of the subject-wise scope of examination questions writing, difficulty of test questions, and acceptance rate of the first test should be prepared after public hearings or seminars related to the examination questions.

• 한국군사과학기술학회지
• /
• 제21권4호
• /
• pp.541-550
• /
• 2018

The works of preparing for missile flight test are becoming more complicated. To reduce the amount of waste time along with the complexity of the task, systematic analysis of waste factors should be performed before performing process improvement. The waste factors for missile flight test are first defined using lean-based waste factors. The improvement priorities for the defined waste factors are surveyed. For reliable analysis, AHP is used in questionnaire analysis instead of the existing method with large error. Then weighting and priority for waste factors for level 1 and Level 2 are suggested. Through AHP, we could derive reliable improvement priorities for waste factors. It is analyzed that the biggest cause of waste factors is waiting time and identified as the first item to be considered when establishing improvement plan. In addition, suggestions for improvement measures of waste factors are presented through brainstorming method. Reliable results will be an important factor in process redesign for missile flight test works.

• PNF and Movement
• /
• 제9권1호
• /
• pp.11-19
• /
• 2011

The purpose of this study was to investigate whether it makes difference to use of the Augmented Feedback Type(Verbal Feedback, VTR Feedback and Verbal & VTR Feedback) to hemiplegic adults on learning of motor skill. For the purpose 15 hemiplegic adults who are received rehabilitation program at H hospital in Hong-Sung, Choong-Nam Province. Subjects were classified into three groups by random assignment; the Verbal Feedback group, the VTR Feedback group and Verbal & VTR Feedback group. Each groups received 5 subjects from hemiplegic adults. Subjects were tested by Timed Up and Go test for 9 weeks. And to find out the improvement measured by Pre-Test, Acquisition Test and Retention Test. To find out the improvement of each group's measures took average and standard deviation. To probate the significance of difference between the improvement conducted the one-way ANOVA and to probate the significance of difference of Acquisition Test and Retention test conducted paired t-test. The results of this study were as follows; First, All of Augmented Feedback Types had a positive effect on hemiplegic adults to learning of motor skill. Second, The Verbal Feedback group and the VTR Feedback group had no significantly difference at Acquisition Test, But They had the most improvement at Retention Test. Third, In hemiplegic adults, the Verbal & VTR Feedback group had the highest Retention Effect.

• 한국보건간호학회지
• /
• 제21권1호
• /
• pp.85-94
• /
• 2007

Purpose: This study examined the effects of Interpersonal Relationship Improvement Program Applied MMTIC on self-esteem and interpersonal relationships. Method: The survey was carried out from September to November, 2005. The subjects were 32 middle school students in G City. To test the effects of the Interpersonal Relationship Improvement Program Applied MMTIC, the subjects were divided into two groups, 16 in the experimental group and 16 in the control group. The research design used in this study was a nonequivalent control group pre-test and post-test design in quasi-experimental research. The research tools included MMTIC(Murphy-Meisgeier Type Indicator for Children), self-esteem scale, and interpersonal relationship scale. The collected data was analyzed using Chi-square test, paired t-test, and t-test on the SPSS/WIN 10.0 program. Result: Significant differences were found in the self-esteem scores and interpersonal relationship between the middle school students who had participated in the Interpersonal Relationship Improvement Program Applied MMTIC and those who did not. Conclusion: Therefore, it appears that the Interpersonal Relationship Improvement Program Applied MMTIC is a useful nursing intervention for improving the self-esteem and interpersonal relationships of middle school students.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2011년도 춘계학술대회
• /
• pp.663-674
• /
• 2011

Continuing and Developing the growth, the company should focus on 'time to market of high quality production' and 'cost down'. Due to the complexity of the production, reliability is being one of the important factor. In this study, in particular, focus on parts reliability test improvement about printer product and proceeded. Need test improvement for time to market that is developed, and reduce expense with test period that is required at Reliability Test time of new parts and should high quality level of product. Finally huge Failure Cost (F-COST) occurs because quality level of product drops if parts that accomplish product does not ensure reliability and this is associated by malfunction in marketplace.