Lighting poles and antenna masts are typically high, slender and light structures. Moreover, they are often characterized by distributed eccentricities that make very complex their shape. Experience teaches that this structural type frequently suffers severe damage and even collapses due to wind actions. To understand and interpret the aerodynamic and aeroelastic behavior of lighting poles and antenna masts, this paper presents the results of static and aeroelastic wind tunnel tests carried out on a complex prismatic element representing a segment of the shaft of such structures. Static tests are aimed at determining the aerodynamic coefficients and the Strouhal number of the test element cross-section; the former are used to evaluate the critical conditions for galloping occurrence based on quasi-steady theory; the latter provides the critical conditions for vortex-induced vibrations. Aeroelastic tests are aimed at reproducing the real behavior of the test element and at verifying the validity and reliability of quasi-steady theory. The galloping hysteresis phenomenon is identified through aeroelastic experiments conducted on increasing and decreasing the mean wind velocity.
A testing inspection is one of the important in the industry, owing to determine the reliability and directivity of testing inspection results. Therefore, the quality assurance and quality control (QA/QC) work which performed by personnel not directly in the inventory compilation development, in testing inspection must be thoroughly considered. Some agencies for environmental test inspection, they sometimes misunderstood that the QA/QC was ended with proficiency testing performance and on-site assessment by a director. Thus, results were often calculated without QA/QC work by self manual when conducting test. The objective of this study was to improve reliability of testing and inspection agency through the QA/QC case study which basically performed to raising reliability of testing and inspection agency. In this study, it increased reliability of result by verifying calibration curve (IC, ICV, CCV), blank, accuracy (LCS, MS) and precision as QA/QC performance, while performing investigation of soil contamination in mining areas. This study suggests that reliability establishing method of test result and management method of analysis process, through the QA/QC instance of testing agency.
The soft clays are widely distributed, and one of the prominent engineering problems is the creep behavior. In order to predict the creep deformation of soft clays in an easier and more acceptable way, a simple creep constitutive model has been proposed in this paper. Firstly, the triaxial creep test data indicated that, the strain-time (𝜀-t) curve showing in the 𝜀-lgt space can be divided into two lines with different slopes, and the time referring to the demarcation point is named as tEOP. Thereafter, the strain increments occurred after the time tEOP are totally assumed to be the creep components, and the elastic and plastic strains had occurred before tEOP. A hyperbolic equation expressing the relationship between creep volumetric strain, stress and time is proposed, with several triaxial creep test data of soft clays verifying the applicability. Additionally, the creep flow law is suggested to be similar with the plastic flow law of the modified Cam-Clay model, and the proposed volumetric strain equation is used to deduced the scaling factor for creep strains. Therefore, a creep constitutive model is thereby established, and verified by successfully predicting the creep principal strains of triaxial specimens.
Journal of the Korea Institute of Information Security & Cryptology
/
v.25
no.6
/
pp.1421-1433
/
2015
For an accurate analysis through the forensic of digital devices and computer, it is a very important validation of the reliability of digital forensic tools. To verify the reliability of the tool, it is necessary to research and development of the data set to be input to the tool. In many-used Windows operating system of the computer, there is a Window forensic artifacts associated with time and system behavior. In this paper, we developed a set of data in the Windows operating system to be able to analyze all of the two Windows artifacts and we conducted a test with published digital forensic tools. Therefore, the developed data set presents the use of the following method. First, artefacts education for growing ability can be analyzed acts standards. Secondly, the purpose of tool tests for verifying the reliability of digital forensics. Lastly, recyclability for new artifact analysis.
The Journal of Korean Academic Society of Nursing Education
/
v.4
no.1
/
pp.66-80
/
1998
With the opening of healthcare market, the health care environment in Korea is anticipating a drastic change. In this Internationally open market environment, it is necessary to introduce a systematic health care plan and DRG system which offer qualitative medical services as well as reduced cost. Purpose of this study is to develop and test the critical pathway for Cesarean section patient in the way to be possible the integrated inpatient management. It was adopted the process of six phases to develop the critical pathway as the theoretical framework implemented by Johns Hopkins Hospital, Maryland, U.S.A. In the first phase, make a selection of diagnosis/procedures to develop. In the second phase, organize a development team consisted of eight expertises working in maternity nursing area. In the third phase, analyze the overall medical service offered to patient through review medical records and decided the service content and the implementation period for the Cesarean section patient. In the forth phase, make out a preliminary critical pathway after verification of expert group on content validity. In the fifth phase, validity operate to ten Cesarean section patients to test implementation in practice by using the preliminary critical pathway, In the sixth phase, defined the final critical pathway. The result of this study was as follows. 1. There were classified 8 categories as monitoring/assesment, treatment, medication, activity, diet, test, consult, education/discharge plan for vertical axis and showed hospital stayed from admission to discharge for horizontal axis of critical pathway through analysis 68 Cesarean section patients medical records. 2. After critical review 68 medical records to make out a preliminary critical pathway, hospital stays for horizontal axis were showed 6 days, mean hospital stays were 7.5 days, 2.1 days were to be taken operation after admission and 4.2 days were stayed until discharge after operation. 3. After making out a questionare in 90 items of a medical service content of eight categories and verifying the content validity of expertises, the 85 items of the preliminary critical pathway were selected by expertises agreement over 88% and modified or deleted 5 items showing agreement below 75%. 4. After verifying a validity to 10 patients for 4 weeks, hospital stays were 5.9 days. There were deleted 1 item and modified or supplemented the 9 items of the 10 items.
This study is conducted with the aim of identify the factors constituting learning competencies for engineering college students, and developing and validating the scale to measure them. To this end, literature and prior research were reviewed and focus group interview was conducted with high-achieving learners of K University in the capital region of Korea. According to previous research, 3 learning competency groups, 12 learning competencies and 41 sub-competencies were derived. Delphi survey was carried out twice, 28 sub-competencies were derived among the 41 sub-competencies through this process. 166 initial items were developed through literature review and FGI. Then, 130 items were confirmed by verifying content validity in the second Delphi survey. Based on this, pilot test were performed with 110 students in K university, and an interview was conducted with 50 students who participated in the pilot test. Reflecting the pilot test results, 1 sub-competency and 22 items were deleted. After the confirmed pilot test results, the main test were performed with all current students in K University. According to the main test result, the validity of the scale and the model fit was verified for the response data of 823 students, and the scale consisting of a total of 105 items was confirmed. The final learning competencies scale included three competency groups and 10 learning competencies. The scale developed in this study can be used as an independent scale for each competency group as needed. It is expected that this scale can be contributed to support the development their learning competencies for academic success of engineering college students, who are future learners.
IEMEK Journal of Embedded Systems and Applications
/
v.5
no.4
/
pp.217-224
/
2010
Nowadays, people perform their tasks anywhere anytime using their mobile devices. For this reason, data synchronization (DS) between mobile devices and a central server has become one of the most essential technologies in mobile environments. Currently, several mobile DS protocols are proposed and used. However, the existing DS protocols cannot guarantee interoperability between them. To solve the problem, an embedded DS gateway has been developed in our previous study. The gateway runs on a Windows Mobile-based emulator. It converts data on a mobile device into common data specified by OMA DS standard protocol and vice versa. The embedded gateway has been built to support the OMA DS standard protocol. In order to verify that the embedded gateway conforms to the OMA DS standard protocol, two kinds of OMA conformance tests have to be conducted - interoperability test with an OMA DS-based server and conformance test with SCTS (SyncML Conformance Test Suit). In this paper, some parts of the gateway previously built are modified and the modified gateway is installed on a Windows Mobile-based smart phone. And the interoperability test and the conformance test with the SCTS are conducted. The results of the tests show that the embedded DS gateway operates properly on the Windows Mobile-based smart phone and that the gateway passes the tests, verifying its conformity to the OMA DS standard protocol. In addition, DS performance tests show that DS delay times between a real smart phone and a DS server increase gently as the number of DS data increases. In other words, the embedded DS gateway built in this paper can be used for a real smart phone at a reasonable performance cost.
Kim, B.G.;Jeong, J.Y.;Kim, D.J.;Kim, G.S.;Keum, Y.T.
Proceedings of the Korean Society for Technology of Plasticity Conference
/
2009.10a
/
pp.420-423
/
2009
In this study, the guideline for designing the drawbeads used in the stamping dies for advanced high strength steel (AHSS) sheets is investigated. In the drawbead drawing test, the drawbead forces for verifying the equivalent drawbead model(EDM) and the sheet strains for finding marginal strains from $FLC_0$ are measured. In the finite element analysis (FEA), the bending allowance, R/t, is obtained. Based on the forming and bending allowances obtained, the design guideline of the drawbead for determining height and width, which depends on the restraining force and the forming allowance, is prepared by using EDM.
Proceedings of the Korea Concrete Institute Conference
/
2008.04a
/
pp.809-812
/
2008
Bleed test methods currently being specified in KS, ASTM and BS are the methods to read the height of bleed water and volume changes of mortar poured into transparent cylinder. Time for measuring of bleed are specified as 3, 20 hours in KS specification, while bleed is measured at 3 hour and change of volume is measured at 24 hour in ASTM and BS specification. Like these, bleed test takes a lot of time to conduct. Another method to measure the bleed is the pressure filter test. This method predict the bleed by measuring the passed water through the fiber glass filter under pressure. This pressure filter test developed by Schupack in 1971 has an advantage in predicting the bleed in shorter time. However, data correlating the pressure filter test results with amount of bleed are limited. Therefore, this study aims at verifying the availability of pressure filter test as a method to predict the bleed and deriving the relation between this test results and bleed.
The purpose of this study was to explore whether PPAT drawing using an application can be developed on digital devices for game addicts. The PPAT drawing test is useful and reliable for verifying problem-solving skills in how people pick apples. As a result of this study, the over-immersion group scored lower than the average user group in the "problem Solving" category of the PPAT drawing test using the PPAT drawing applicaion on digital devices, and expressed by not reaching for apples, or by picking apples without reasonable support. The findings in this study suggest that the PPAT drawing test application on digital devices has significantly demonstrated its original purpose of 'problem resolution', as well as future psychotherapeutic interventions for Internet over-immersion subjects as well as users who are familiar with digital devices.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.