• Journal of the Ergonomics Society of Korea
• /
• v.15 no.2
• /
• pp.89-98
• /
• 1996

The objective of this study was to make comparison of the physical work capacities with different types and methods of tasks. To produce standard work loads, a bicycle ergometer and a treadmill were used for the purpose of two different types of tasks. Maximal oxygen uptake measurement tests are usually performen (1) continuously - with no rest between work load increments, or (2) discontinuously - with the subjects resting several minutes between work periods. Continuous test protocol with two different methods of work load increments, (1) ramp test- with 3 to 5 minutes of work period for each work load, and (2) incremental test - where exercise intensity was increased progressively in 2 minutes interval, were used. Predicted physicala work capacities (PWCs) were compared with the one by Kim(1990), and Lee(1995), and the NIOSH physiological criteria. For ergometer test, the PWC based on the ramp test was 89.65% of the one based on the incremental test. The PWC values were 2553.88 ml/min for the ramp test and 2848.82 ml/min for the incremental test. For treadmill test, the PWC based on the ramp test was 97.54% of the one based on the incremental test. The PWC values were 2786.89 ml/min for the ramp test and 2857.24 ml/min for the incremental test. The PWC obtained with a bicycle ergometer was 91.64% of the one obtained with a treadmill for the ramp test, and 99.71% for the incremental test.

• Journal of the Korea Furniture Society
• /
• v.19 no.5
• /
• pp.350-357
• /
• 2008

This research investigates the bending properties to predict the work-energy to maximum load and impact bending energy from static bending and impact bending test. Specimens were prepared from lumber made of thinning crop-trees. Matched specimens were used for MC 12% and green moisture specimens to measure the effect of moisture content on the absorbed energy from static and impact bending tests. The bending properties such as MOE, MOR, etc. is a good predictor to investigate the work-energy and work-energy per unit volume from static bending and impact bending test. The impact bending energy is increased with increasing moisture content. However, the work to maximum load from static bending test is increasing with increasing the MC only for higher density species.

• Journal of the Korean Society of Safety
• /
• v.26 no.3
• /
• pp.43-46
• /
• 2011

The work plate in a construction sites is a frequent cause of falling. But the bulk of the work plates lent to the construction site are handled carelessly by workers. There is general concern about performance declining by repetitive use. However, there is not a accurate guide, research and study on reuse work plate. This study was conducted in order to judge the classification guide to reuse work plate and measure the performance of classified reuse work plates. It is the result that even the A-grade plates classified to be in good shape by workers are below the performance standard. This means that the guide and classification are ineffective.

• Journal of the Ergonomics Society of Korea
• /
• v.25 no.3
• /
• pp.61-66
• /
• 2006

Awkward work postures in workshop highly affect on work-related musculoskeletal disorders(WMSDs). Especially, in automobiles assembly process, these awkward work postures of workers may cause serious injury and illness. This study is to compare the performance among the evaluation tools which can measure the work-loads caused by the awkward work postures in automobiles assemble process. RULA, REBA and TVAL(Toyota Verification of Assembly Line) are used as the evaluation tools. The 85 jobs selected in the automobiles assembly process are applied to the three tools and their performances are analyzed after the evaluation of the work-load in each job. Through various measures of performance such as statistical test, DUNCAN test, regression test etc., the tendencies and characteristics among them are analyzed in detail.

• Korean Journal of Human Ecology
• /
• v.6 no.1
• /
• pp.57-66
• /
• 2003

The purpose of this study was to investigate the housewives' characteristics of household work management. to classify the household work manager styles and to investigate the relationship between the household work manager styles and the family life satisfaction. The data used for statistical analysis is 352 housewives. The data were analyzed by using SPSSWIN Program, $x^2$-test, one-way ANOVA With Duncan's Multiple Range test and t-test were utilized to test null hypotheses. The major findings of this study were as follows : Human centered household work management was more popular than task centered. Family life satisfaction was significantly different depending on the household work manager style. The idel style was concluded as the most desirable manager style.

• Journal of Preventive Medicine and Public Health
• /
• v.56 no.5
• /
• pp.407-412
• /
• 2023

Objectives: Work stress is associated with non-communicable diseases, increased healthcare costs, and decreased work productivity among employees in the information technology sector. There is a need for regular work-stress screening among employees using valid and reliable tools. The Tool to Assess and Classify Work Stress (TAWS-16) was developed to overcome limitations in existing stress assessment tools in India. This study aimed to test the reliability of TAWS-16 in a sample of managerial-supervisory employees. Methods: This observational reliability study included data from 62 employees. Test-retest and inter-method reliability were investigated using a TAWS-16 web application and interview by telephone, respectively. Kappa values and intra-class correlation coefficients were calculated. Internal consistency was assessed through Cronbach's alpha. Results: For both test-retest and inter-method reliability, the agreement for both work-related factors and symptoms suggestive of work stress exceeded 80%, and all kappa values were 0.40 or higher. Cronbach's alpha for test-retest and inter-method reliability was 0.983 and 0.941, respectively. Conclusions: TAWS-16 demonstrated acceptable reliability. It measured stressors, coping abilities, and psychosomatic symptoms associated with work stress. We recommend using TAWS-16 to holistically identify work stress among employees during periodical health check-ups in India.

• Korea Journal of Hospital Management
• /
• v.26 no.1
• /
• pp.26-41
• /
• 2021

Purpose: This study is to identify the relationship among married nurses' social support, work-family conflict and work-family enrichment and to examine the influence of social support on work-family conflict and work-family enrichment. Methods: Data were collected from married nurses working at three hospitals with more than 100 beds in J Province and analyzed by descriptive statistics, t-test, ANOVA, Mann-Whitney U test, Kruskal-Wallis H test, Pearson's correlation analysis and hierarchical regression analysis using SPSS 21 program. Findings: In the correlation analysis only social support and work-family enrichment showed positive correlation. As a result of hierarchical multiple regression analysis, social support still acted as a significant influence factor on work-family conflict and work-family enrichment even in the state of considering the effect of control variables. Conclusion: In order to lower work-family conflict and to enhance work-family enrichment of married nurses, it is necessary to introduce and implement welfare policies for work-family reconciliation at the workplace level and at home level it is necessary to provide concrete measures so that married nurses can find the value of life as workers while house working and nurturing.

• Design & Manufacturing
• /
• v.6 no.2
• /
• pp.17-23
• /
• 2012

In April 2010, the die and mould grand prix for university student was held in Osaka as a special event of Inter Mold Japan. The students from Korea, China, and Japan participated to demonstrate the design and manufacturing skill of die and mould. Based on the given product drawing of Test Work, progressive die should be designed and manufactured. Also, production of Test Work should be carried out. This study had been conducted to participate in the grand prix and to learn practical knowledge and experience from real die design and making. Test Work is made of SPCC and includes piercing, blanking, deep drawing and burring. From the analysis of product drawing, process planning and die design was carried out. Progressive die for Test Work was manufactured using CNC milling, grinding, wire-cutting and polishing. The production was successfully completed using mechanical press and product showed very good accuracy satisfying all dimensional tolerances.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.48 no.4
• /
• pp.15-22
• /
• 2006

This study was conducted by the slump test and the consistency test of the cement mixed soil which is soil mixed with cement to investigate and estimate the difficulty degree of work and the proper water content. So I would like to present the fundamental data that establish the work standard of the cement mixed soil. In conclusion, in this study the slump value of the cement mixed soil increases over-all according to the increase of the water content although it has a little difference of the increase range and it is smaller than one of the soil. It is estimated that the aggregating and throwing work of the cement mixed soil which is mixed with 6% and 9% cement would be fine when it has the $25%{\sim}27%$ water content and the wall plastering work is the $30%{\sim}32%$ and the floor plastering work is the $30%{\sim}35%$ and the flowing and pouring work is the $40%{\sim}42%$ water content as well as the mold compacting work is the 20%.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06a
• /
• pp.1-6
• /
• 1996

A seeder monitoring system was developed to remove the uneasiness of mis-sowing that drop operations efficiency at sowing-work and to make reliable and stable work. The objectives of this study are to investigate that the system developed is applicable to sowing soybean seeds and scattering fertilizer and to evaluate performance of the system developed through the indoor test and the indoor test and the field test before it is propelled to put the system developed to practical use.