• 제목/요약/키워드: Test Setup Design

검색결과 76건 처리시간 0.026초

Design and Control of Levitation and Guidance Systems for a Semi-High-Speed Maglev Train

  • Kim, Min;Jeong, Jae-Hoon;Lim, Jaewon;Kim, Chang-Hyun;Won, Mooncheol
    • Journal of Electrical Engineering and Technology
    • /
    • 제12권1호
    • /
    • pp.117-125
    • /
    • 2017
  • Research on Maglev (Magnetic Levitation) train is currently being conducted in Korea, concerning Urban Transit (110 km/h of maximum speed), semi-high-speed (200 km/h of maximum speed), and high-speed (550 km/h of maximum speed) trains. This paper presents a research study on the levitation and guidance systems for the Korean semi-high-speed maglev train. A levitation electromagnet was designed, and the need for a separate guidance system was analyzed. A guidance electromagnet to control the lateral displacement of the train and ensure its stable operation was then also designed, and its characteristics were analyzed. The dynamic performance of the designed levitation and guidance electromagnets was modeled and analyzed, using a linearized modeling of the system equations of motion. Lastly, a test setup was prepared, including manufactured prototypes of the designed system, and the validity of the design was verified and examined with performance evaluation tests.

실리콘기반 자기유변탄성체의 진동특성 연구 (A Study on the Vibration Characteristics of MR Elastomers Based on Silicon)

  • 박정헌;이철희;김철현;조원오
    • 한국소음진동공학회논문집
    • /
    • 제21권8호
    • /
    • pp.714-719
    • /
    • 2011
  • This paper presents vibration characteristics of magnetorheological(MR) elastomer, whose elastic modulus are controllable by applied magnetic field. By using this property, the material can be applied to vibration absorber, so that the stiffness of the absorber can be changed and actively controlled according to the magnetic flux density. However, the various performances of MR elastomer depends on different polarized direction of particles by applied magnetic field and dimension during the manufacturing process. In this paper, in order to obtain the optimal characteristics of MR elastomer, MR elastomers with different types and dimensions are prepared for a series tests. Using this test setup, extent of natural frequency shifted against magnetic field at various excitation frequencies can be measured. Specimens are prepared with 3 types, as cylinder samples exposed to magnetic field vertically, horizontally and unexposed during cure, respectively. Also, a set of design variables are considered to produce MR elastomers. Through the modal tests of mass structure with MR elastomer, the optimal design as well as the polarization direction of MR elastomer is obtained among the various dimensions and 3 directional types of MR elastomers.

실리콘기반 자기유변탄성체의 진동특성연구 (A Study on the Vibration Characteristics of MR Elastomers Based on Silicon)

  • 박정헌;이철희;김철현;조원오
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2011년도 춘계학술대회 논문집
    • /
    • pp.752-757
    • /
    • 2011
  • This paper presents vibration characteristics of magnetorheological (MR) elastomer, whose elastic modulus are controllable by an applied magnetic field. By using this property, the material can be applied to vibration absorber, so that the stiffness of the absorber can be changed and actively controlled according to the magnetic flux density. However, the various performances of MR elastomer depends on different magnetically polarization direction and dimension during the manufacturing process. In this paper, in order to obtain the optimal characteristics of MR elastomer, MR elastomers with different types and dimensions are prepared for a series tests. Using this test setup, extent of natural frequency shifted against magnetic field at various excitation frequencies can be measured. Specimens prepared with 3 types which are exposed to magnetic field vertically, horizontally and unexposed during cure. Also, a set of design variables are considered to produce MR elastomers. Through the modal tests of mass structure with MR elastomer, the optimal design as well as the polarization direction of MR elastomer is obtained among the various dimensions and 3 directional types of MR elastomers.

  • PDF

2차원 실내모형실험과 수치해석을 이용한 사질토 지반의 얕은 터널에 대한 지중변형에 대한 규명 (Investigation of Subsurface Deformations for the Shallow Tunnel In A Granular Mass Using Two-Dimensional Laboratory Model Test and Numerical Analysis)

  • 이용주
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2006년도 춘계 학술발표회 논문집
    • /
    • pp.219-228
    • /
    • 2006
  • In urban areas, tunnelling induced ground deformations, particularly ground settlements should be considered in order to minimize the damage of adjacent structures. Therefore, an appropriate monitoring system for the tunnel construction should be setup at the planning or design stage. A number of studies on ground settlements due to tunnelling in soft ground have been carried out so far. However, most studies have focused on clay soil rather than sand soil. In particular, a few studies on behaviour of subsurface deformations in granular material have been reported. In this study, two-dimensional laboratory model test with aluminium rods regarded as continuum granular material and close range photogrammetric technique, and numerical analysis were carried out in order to identify the behaviour of subsurface deformations due to shallow tunnelling. Direction and magnitude of displacement vectors from the model test was identical to the numerical analysis. In particular, the vector direction was appeared to be toward a point below the tunnel invert level. A narrow 'chimney or tulip like' pattern of vertical displacement was confirmed by both the model test and numerical analysis. This is consistent with the field data. In addition to the qualitative comparison, the quantitative comparison of subsurface settlements according to 2D volume loss showed good agreement between the model test and numerical analysis. Therefore, close range photogrammetric technique applied in the model test may be used to validate the result from the continuum numerical analysis.

  • PDF

나로호 상단부 Line-Telemetry 데이터처리시스템 개발 및 시험 (Development and Test of Line-Telemetry DPS for KSLV-I Upper Stage)

  • 김광수;이수진;정의승
    • 항공우주기술
    • /
    • 제10권1호
    • /
    • pp.107-115
    • /
    • 2011
  • 지상관제용 텔레메트리 데이터처리시스템(Line-telemetry DPS)은 나로호 발사체의 지상 운용 또는 비행시험 중 상단부에 탑재된 원격측정시스템으로부터 RS-422 인터페이스를 통해 PCM 데이터를 수신하고 데이터처리 후 9개의 TLM(Telemetry) 콘솔을 통해 상단시스템의 상태를 모니터링 하는 시스템이다. Line-telemetry DPS (Data Processing System)는 데이터 취득 및 decommutation을 위한 취득(Acquisition) 서버와 시스템을 관리하는 관리(Management) 서버 그리고 각 탑재 시스템을 모니터링하기 위한 9개의 콘솔로 구성된다. Line-telemetry DPS는 UTC(Universal Time Coordinated) 동기되어 상단부 탑재 원격측정 시스템의 원시(raw) 프레임과 decommutation된 온보드 파라미터를 실시간 검출, 저장, 분배 기능을 수행한다. 본 논문에서는 나로호 상단부의 원격측정시스템에 대한 간략한 소개, 지상 및 비행시험을 위한 Line-telemetry DPS의 기능 및 설계, 비정상 알람 파라미터 설정 정보, 지상/비행시험절차 및 결과에 대해 기술하고자 한다.

공정열교환기 소형 시제품에 대한 고온구조해석(III) (High-temperature Structural Analysis of Small-scale Prototype of Process Heat Exchanger (III))

  • 송기남;이형연;김찬수;홍성덕;박홍윤
    • 대한기계학회논문집A
    • /
    • 제35권2호
    • /
    • pp.191-200
    • /
    • 2011
  • 초고온가스로로부터 생성된 $950^{\circ}C$ 정도의 초고온 열을 이용하여 수소를 경제적이며 또한 대량으로 생산하는 원자력수소생산시스템에서 공정열교환기는 초고온 열과 화학반응 공정을 통해 수소를 생산하기 위한 핵심 기기이다. 한국원자력연구원에서는 초고온가스로에 사용될 기기에 대한 성능시험을 위해 소형가스루프를 구축하고 공정열교환기 시제품을 수정 제작하였다. 본 연구는 공정열교환기 수정 시제품을 소형가스루프에서 시험하기 전에 루프 시험조건하에서 공정열교환기 수정 시제품의 고온 구조건전성을 미리 평가하기 위한 작업의 일환으로 공정열교환기 수정 시제품에 대한 고온 구조해석 모델링, 거시적 열 해석 및 구조 해석을 수행하고 그 결과들을 정리한 것이다. 해석 결과는 공정열교환기 수정 시제품 성능시험 장치 설계에 반영할 것이다.

아스팔트 혼합물의 마스터곡선 작성 방법의 비교 및 분석 (Comparison and Analysis on the Process of Master Curve Determination for Hot Mix Asphalt)

  • 이관호
    • 한국산학기술학회논문지
    • /
    • 제12권9호
    • /
    • pp.4199-4204
    • /
    • 2011
  • 아스팔트 혼합물의 동탄성계수는 포장체의 내구성 및 공용성을 평가하는데 매우 중요한 지표이다. 최근 미국의 AASHTO 2002 설계법 및 한국형 포장설계법에서도 아스팔트 포장체의 가장 중요한 물성중 하나를 동탄성계수로 정의하였고, 이를 아스팔트 포장의 설계 및 해석에 적극 이용하고 있다. 동탄성계수를 설계에 이용하기 위해서는 마스터곡선을 작성하여야 한다. 마스터곡선은 각각의 아스팔트 혼합물을 이용하여 평가된 동탄성계수 값을 이용하여 결정한다. 마스터곡선을 결정하는 방법은 표준화되어 있으나, 저온영역(-10도)에서는 시험장비 계측장비의 결로로 인한 측정오차 및 고온영역(55도)에서는 아스팔트 바인더의 유체화 및 실험기기 세팅상의 문제들이 발생하여 측정 결과값에 큰 영향을 준다. 따라서, 이러한 온도대역의 자료를 제외한, 5도, 21도 및 40도에서 측정된 결과값을 이용하여 마스터곡선을 작성 및 분석하였고, 이를 기존의 표준방법으로 결정한 마스터곡선과 비교하였다. 본 연구에서 제안된 방법을 이용하여 결정된 마스터곡선은 고온영역에서 차이가 있기는 하지만, 충분히 사용가능한 것으로 판단되었다.

Investigation of lateral impact behavior of RC columns

  • Anil, Ozgur;Erdem, R. Tugrul;Tokgoz, Merve Nilay
    • Computers and Concrete
    • /
    • 제22권1호
    • /
    • pp.123-132
    • /
    • 2018
  • Reinforced concrete (RC) columns which are the main vertical structural members are exposed to several static and dynamic effects such as earthquake and wind. However, impact loading that is sudden impulsive dynamic one is the most effective loading type acting on the RC columns. Impact load is a kind of impulsive dynamic load which is ignored in the design process of RC columns like other structural members. The behavior of reinforced concrete columns under impact loading is an area of research that is still not well understood; however, work in this area continues to be motivated by a broad range of applications. Examples include reinforced concrete structures designed to resist accidental loading scenarios such as falling rock impact; vehicle or ship collisions with buildings, bridges, or offshore facilities; and structures that are used in high-threat or high-hazard applications, such as military fortification structures or nuclear facilities. In this study, free weight falling test setup is developed to investigate the behavior effects on RC columns under impact loading. For this purpose, eight RC column test specimens with 1/3 scale are manufactured. While drop height and mass of the striker are constant, application point of impact loading, stirrup spacing and concrete compression strength are the experimental variables. The time-history of the impact force, the accelerations of two points and the displacement of columns were measured. The crack patterns of RC columns are also observed. In the light of experimental results, low-velocity impact behavior of RC columns were determined and interpreted. Besides, the finite element models of RC columns are generated using ABAQUS software. It is found out that proposed finite element model could be used for evaluation of dynamic responses of RC columns subjected to low-velocity impact load.

액체로켓엔진 연소기를 이용한 고고도 환경 모사용 디퓨저 시동특성 연구 (An Experimental Study of a Diffuser Starting Characteristics for Simulating High-Altitude Environment by using a Liquid Rocket)

  • 이양석;전준수;고영성;김유;김선진
    • 한국항공우주학회지
    • /
    • 제38권12호
    • /
    • pp.1195-1201
    • /
    • 2010
  • 본 연구에서는 액체 로켓 엔진의 고온 연소 가스를 이용하여 축소형 고고도 환경 모사용 초음속 디퓨저 성능 실험을 수행하였다. 실험 장치는 연소실, 진공 챔버, 디퓨저로 구성되어 있다. 고고도 환경 모사 시험은 연소실 압력이 약 26, 29, 32barg 세 조건으로 수행하였고, 세가지 조건에서 모두 디퓨저는 성공적으로 시동되었으며 진공 챔버 압력이 약 140torr로 형성하였다. 이전의 상온 고압 가스를 이용한 디퓨저의 시동 특성과 비교하였을 때 시동 압력과 압력 분포 등의 시동 특성의 경향성은 유사하였으나, 고온 환경으로 인하여 진공 챔버에 형성되는 압력은 2배 정도 높은 것을 확인하였다. 본 연구 결과는 향후 실물형 고고도 환경 모사 시험 설비를 구축하는데 기초 자료로 활용될 수 있을 것으로 판단된다.

공정열교환기 소형 시제품에 대한 고온구조해석(IV) - 거시적 고온 탄·소성 구조해석을 중심으로 - (High-Temperature Structural Analysis of a Small-Scale Prototype of a Process Heat Exchanger (IV) - Macroscopic High-Temperature Elastic-Plastic Analysis -)

  • 송기남;홍성덕;박홍윤
    • 대한기계학회논문집A
    • /
    • 제35권10호
    • /
    • pp.1249-1255
    • /
    • 2011
  • 공정열교환기는 초고온가스로로부터 생성된 $950^{\circ}C$ 정도의 초고온 열을 대량의 수소를 생산하기 위한 화학반응공정으로 전달하는데 필요한 핵심기기이다. Hastelloy-X 로 제작된 소형 공정열교환기 시제품이 한국원자력연구원에 있는 소형가스루프에서 성능시험이 계획되어 있다. 본 연구에서는 소형가스루프 시험조건하에서 소형 공정열교환기 시제품의 고온 구조건전성을 사전에 평가하기 위한 작업의 일환으로 소형 공정열교환기 시제품에 대한 고온 구조해석 모델링, 거시적 열 해석 및 탄 소성구조 해석을 수행하고 그 결과들을 정리한 것이다. 해석 결과는 공정열교환기 수정 시제품 성능시험장치 설계에 반영할 것이다.