• 한국정보통신설비학회:학술대회논문집
• /
• 2009.08a
• /
• pp.63-67
• /
• 2009

In this paper we propose a QoS policy, which is based on both DSCP and SPQ, appropriate to TPS users on optical subscriber network. Then we experiment and evaluate QoS policy through the test bed which emulates real optical subscriber network. In order to perform effective and real experiment on test bed we make test traffic equivalent to 400 TPS users and give it to test bed. The experimental result shows that no packet loss in real time service traffic such as voice, IPTV occurs during more than 4 hours. We think that our proposed QoS policy is a proper method which guarantees the service quality of real time services on optical subscriber network.

• Journal of the Optical Society of Korea
• /
• v.11 no.3
• /
• pp.101-107
• /
• 2007

In this paper, we have presented the results of Wavelength Division Multiplexing-Passive Optical Network (WDM-PON) based fiber-to-the-home (FTTH) field trial test which was held in the city of Gwangju. We have implemented an injection locked Fabry-Perot Laser Diode (FP-LD) based WDM-PON system and reliably delivered Internet Protocol TV (IP-TV), networked Personal Video Recorder (N-PVR), High-Definition Video on Demand (HD-VoD), Education on Demand (EoD) and Internet service as FTTH service through the system during the field trial test. We have also verified that the WDM-PON system worked well to provide quality of service (QoS) guaranteed 100Mbps bandwidth per subscriber. Furthermore, we have presented network designing issues in Outside Plant (OSP) and Customer Premises Network (CPN) that should be overcome to efficiently deploy FTTH service. Finally, based on the field trial test results, we proposed FTTH service deployment strategies.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.887-890
• /
• 2005

The earthquake test Procedures specified in three international codes were reviewed and compared for the network equipments. As technical level on the electronics and networking is growing in Korea, many related equipments are required to export to abroad. The network equipments are now essential tools for communication among individuals as well as societies, especially at the hazard situation such as earthquake strike. The Korean network companies are trying to improve the earthquake resistance performance for their products to expand domestic and international markets. In this paper it is reviewed that most codes related on the earthquake tests can be performed with the facilities provided in Korea for the network equipments. However new facility is required to prepare for more performance and higher regulating codes expected.

• Journal of Digital Contents Society
• /
• v.19 no.4
• /
• pp.801-808
• /
• 2018

The performance test methodology for switch, router or integrated networks that make up the wired network is not clearly defined. Due to smart phones and multimedia traffic, the speed of the network is rapidly increasing to 100Gbps. However, there is no formalized test method, and performance test related parts are still being tested based on old data. Telecommunication companies and companies are testing their requirements in their own BMT, and government or public institutions are requesting performance tests from external organizations. As the demand for the performance test of next generation network equipments and the integrated network increases, analysis of the performance test method should be done as soon as possible. Therefore, in this paper, we analyze the performance test method performed by the institute and propose guidelines that can be applied to all wired network equipment.

• Journal of the Korea Computer Industry Society
• /
• v.10 no.4
• /
• pp.143-150
• /
• 2009

Remote control service, monitoring, gear service of information electronic appliance, various services of security service and so on of Home network that is by link of Ubiquitous environment are offered. These services need verification process through priority test to use and are changed. If test using actuality information electronic device for test, much expenses and time may be invested. Home network test bed offers softness of research using control model and simulator, in this paper, Wish to design and embody home network test bed to do environment construction of home network and test of application service. Because use istent power line just as it is without necessity to establish circuit in addition by solution of home network testbed, expense costs to be less and establishment used easy PLC. Also, propriated Wireless sensor network that use Zigbee by solution of home network testbed. Appliance check and monitor square do by Home Auto that know embodied, and embodied by Home Gateway that interlink terminals of Home Auto and out of.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.1
• /
• pp.85-95
• /
• 2015

Network-on-chip (NoC) has evolved to overcome the issues of traditional bus-based on-chip interconnect. In NoC-reuse as TAM, the test schedulers are constrained with the topological position of cores and test access points, which may negatively affect the test time. This paper presents a scalable hybrid test data transportation scheme that allows to simultaneously test multiple heterogeneous cores of NoC-based SoCs, while reusing NoC as TAM. In the proposed test scheme, single test stimuli set of multiple CUTs is embedded into each flit of the test stimuli packets and those packets are multicast to the targeted CUTs. However, the test response packets of each CUT are unicast towards the tester. To reduce network load, a flit is filled with maximum possible test response sets before unicasting towards the tester. With the aid of Verilog and analytical simulations, the proposed scheme is proved effective and the results are compared with some recent techniques.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.9
• /
• pp.1687-1693
• /
• 2007

Advances in technologies of networking, chip integration, and embedded system have enabled sensor networks applicable to a wide range of areas. Sharing some common characteristics, sensor networks are thus diversified in features depending on their applications. An intelligent and digital home can be one area to establish a particular feature of sensor network. This paper proposes a composite sensor and control network, and discusses its applying to the next generation intelligent and digital home. Development results of the network and a test-bed as a virtual test environment are also presented. The proposed network can not only be efficiently applying to achieve new home intelligences but also provide a sound solution to maintenance and operations of home network or devices.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.1
• /
• pp.43.1-43.1
• /
• 2010

We have carried out 43-GHz VLBI test observations of the Korean VLBI Network (KVN), which has obtained the first fringes at 22/43-GHz in 2009 (a talk by Sohn, Bong Won). In collaboration with VERA (VLBI Exploration of Radio Astrometry) in Japan, we have observed Active Galactic Nuclei (AGNs) and Orion-KL at 43GHz on 22nd and 23rd December, 2009, in order to evaluate the baseline- and image-sensitivity of KVN and KVN+VERA. In this talk we report the preliminary results of the VLBI test observations of the Korean VLBI Network at 43GHz.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.11-14
• /
• 1998

Recently, the users of internet are increasing yearly with the rapid spread of internet. So, the shortage of IPv4 address is important issue to ISP. Many ISP is searching for efficient method to use IP address in ATM Network. Korea Telecom has constructed ATM Network test-bed to verify available technologies necessary for ATM Network. This paper, concerning with the configuration of subscribers in ATM Network test bed, analyze the available usage of IP address.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.456-463
• /
• 2009

The preconsolidation pressure has been commonly determined by oedometer test. However, it can also be determined by in-situ test, such as piezocone test with theoretical and(or) empirical correlations. Recently, Neural Network(NN) theory was applied and some models were proposed to estimate the preconsolidation pressure or OCR. However, since the optimization process of synaptic weights of NN model is dependent on the initial synaptic weights, NN models which are trained with different initial weights can't avoid the variability on prediction result for new database even though they have same structure and use same transfer function. In this study, Committee Neural Network(CNN) model is proposed to improve the initial weight dependency of multi-layered neural network model on the prediction of preconsolidation pressure of soft clay from piezocone test result. It was found that even though the NN model has the optimized structure for given training data set, it still has the initial weight dependency, while the proposed CNN model can improve the initial weight dependency of the NN model and provide a consistent and precise inference result than existing NN models.