• 항공우주시스템공학회지
• /
• 제13권1호
• /
• pp.47-53
• /
• 2019

한국항공우주연구원(KARI)은 전기추진 수직이착륙(eVOTL) 항공기 공력성능 향상 방안 연구의 일환으로 교차회전 방식에 대한 기술개발 타탕성에 관한 연구를 진행하였다. 프로펠러 반지름을 증가시켜 전산해석을 수행하고 기존 상용 멀티콥터를 구매하여 0.11 m와 0.21 m 프로펠러를 적용하여 교차회전 구동방식에 관한 기술개발 가능성을 확인한 후, 총 중량 3 kg급의 멀티콥터를 설계 제작하여 추력 및 소음을 측정하기 위한 지상시험을 수행하였다. 교차회전 방식의 효율성을 검증하기 위해 지상시험은 15 in.와 22 in. 프로펠러를 적용하여 동일한 깃끝 속도(Tip speed) 조건에서 추력 및 소음을 측정하여 결과를 비교 분석 하였다. 지상시험결과 요구동력은 22 in. 프로펠러를 적용한 교차회전 방식이 15 in. 프로펠러와 비교하여 약 30%정도 절감 되며 공력소음의 경우 3~5 dB의 소음감소 효과가 측정 되었다.

• 한국정밀공학회지
• /
• 제17권10호
• /
• pp.49-55
• /
• 2000

This study describes the fatigue characteristics for Al2024 alloy, which is aircraft structure material. For this work, the plane-strain fracture toughness test, the plane-stress fracture toughness test and the crack growth rates test were conducted under the standard testing method. Test equipment is a computer-controlled closed-loop fatigue testing machine. The data of each test result is very important to aircraft structure reliability estimation, life prediction, design analysis, endurance analysis and damage tolerance analysis. In addition, the fatigue crack growth threshold($\DeltaKth$) value decreased as the stress ratio increased. Also, $\DeltaKth$ decreased as the thickness increased in LT, TL directions.

• 한국항공운항학회지
• /
• 제19권4호
• /
• pp.105-110
• /
• 2011

The flight test comes at the end of the aircraft development process and is an unique part. The purposes of the flight test are to evaluate the characteristics of the aircraft and validate its design in the real operating environment. Atmospheric considerations are key elements, when the planner of flight test establishes the flight test planning. The primary objective of atmospheric considerations is to ensure safety of the vehicle. The planning through atmospheric considerations can minimize flight cancellations caused by severe weather. In this paper, we present a program for flight suitability distinction, and develop a program for calculation of available sorties.

• 제어로봇시스템학회논문지
• /
• 제17권7호
• /
• pp.704-713
• /
• 2011

For many years, many pilots lost their lives and aircrafts due to GLOC(Gravity-induced Loss Of Consciousness). Due to the emergence of high-gravity maneuvering aircraft such as the F-16, F-15 and T-50, the automatic GLOC detection and recovery systems are necessary to increase the aircraft safeties even when the pilot loses his consciousness due to high-G maneuvering. This paper addresses the design of GLOC detection, warning and recovery algorithm based on a model of supersonic jet trainer. The system is solely controlled by the pilot's control input (i.e., control stick force) and aircraft status such as attitude, airspeed, altitude and so forth. And, moreover, it does not depend upon any pilot physiological condition. The test evaluation results show that the developed system supports the recovery of an aircraft from the unusual aircraft attitude and improves the aircraft safeties even when the pilot loses his consciousness due to high-G maneuvering.

• 한국전자파학회논문지
• /
• 제29권8호
• /
• pp.583-593
• /
• 2018

자연 대기에서 발생하는 낙뢰는 항공기에 용융, 소손 및 아크 등의 물리적인 손상을 발생시킬 뿐만 아니라, 낙뢰의 관통 과정에서 발생하는 기체 외부의 자기장은 기체 내부의 전자장비 및 배선에 전압 및 전류 과도현상을 발생시킨다. 이러한 효과는 항공기 내부의 항공전자시스템에 유도낙뢰를 발생시켜 안전한 비행을 불가능하게 한다. 본 논문에서는 표준감항인증 요구도를 만족하는 보호회로 설계 기법과 공인인증된 시험 결과를 소개하였다.

• Advances in aircraft and spacecraft science
• /
• 제4권4호
• /
• pp.401-419
• /
• 2017

This paper presents the main outcomes of the preliminary development of the Anuloid, an innovative disk-shaped VTOL aircraft. The Anuloid has three main features: lift is provided by a ducted fan powered by a turboshaft; control capabilities and anti-torque are due to a system of fixed and movable surfaces that are placed in the circular internal duct and the bottom portion of the aircraft; the Coanda effect is exploited to enable the control capabilities of such surfaces. In this paper, results from CFD analyses and wind tunnel tests are presented. Horizontal and vertical flights were considered, including accelerated flight. Particular attention was paid to the experimental analysis of the Coanda effect via a reduced scale 3D printed model. The results suggest that the Coanda effect is continuously present at the lower surface of the Anuloid and may be exploited for the control of the aircraft. Also, very complex 3D flows may develop around the aircraft.

• 항공우주시스템공학회지
• /
• 제11권3호
• /
• pp.31-38
• /
• 2017

항공 산업의 소비 수요가 증가함에 따라 국내에서 수행할 수 있는 인증체계 및 비행시험 운영에 필요한 연구가 요구된다. 이에 따라 본 논문에서는 국내 민항기 KC-100, 군용기 T-50 사례와 국외 FAA(Federal Aviation Administration), CAAC(Civil Aviation Administration of China) 기관의 비행시험 관련 문건을 바탕으로 개발 및 개조 중에 있는 항공기에 대한 성능검증, 시험평가 및 안전성 인증을 위한 비행시험 운영 절차와 안전 관리 프로그램 개발 연구를 수행하였다. 또한 항공기 비행시험 절차에 적용할 수 있는 FTSC(Flight Test Safety Committee)의 모범사례(Best Practices)를 조사 분석하였다.

• 한국항공운항학회지
• /
• 제23권1호
• /
• pp.30-40
• /
• 2015

Recently, the need of RPA(Remotely Piloted Aircraft) pilots is increasing rapidly with many requirements in order to be a beginner RPA pilot, including basic flight training, instrument flight qualification training, and aircraft type switching training. When RPA pilot gets disqualified, there will be generated much waste of efforts and expenses of trainees those pilots who are disqualified. Therefore, the methodology of pre-verifying those pilots who are not proper as RPA pilots through various scientific methods will save time and expenses with pre-reducing the pilots who will get disqualified later on. The methodology of aptitude test of RPA pilots is laid out as a consideration of pre-study of RPA pilots work analysis, and select types of aptitude test. A suitability of aptitude test is verified. In order to diagnose the flight aptitude precisely, it requires to be developed. Flight aptitude test tools might be connected with training program which could foster piloting aptitude with pre-diagnosing RPA pilot trainee selecting process. For that reason, we made an experiment in order to verify credibility and suitability of these selected programs with developing RPA pilot aptitude test tools. And also, we analyzed relationships among characteristics, analysis of data, and variables to verify the efficiency of data from prior experiment. Through this thesis, we expect to raise efficiency of flight training by providing pre-flight aptitude test information of RPA pilots.

• 항공우주시스템공학회지
• /
• 제7권3호
• /
• pp.45-50
• /
• 2013

This is a research report about the method of how to maintain qualification of certification flight test crews. KCA(Korea Certification Agency) have completed the KC-100 airplane certification flight tests which is the first time experienced flight tests operation. After the certification flight test, it has been found that annual flying time requirement of 100 hours to the certification flight test pilot is too strict, and other several requirements to maintain the qualification of the certification test crew such as aircraft certification introduction training, initial flight test pilot and flight test engineer certification training, crew resource management training, aviation physiology training, and survival training was difficult to implement in Korean civil aviation environments. In this study, it was suggested that 30 hours of flying time for maintaining certification flight test pilot qualification could be applied to contribute for safe operation of certification flight test and the other training requirements of the certification flight test crew could be fulfilled using self made training courses, existing FAA training courses and Korean Air Force training resources. Therefore, it is recommended that the regulation of maintaining the certification flight test crew qualification should be refined to implement the requirement practically.

• 항공우주시스템공학회지
• /
• 제12권4호
• /
• pp.26-34
• /
• 2018

이륙 중량 25 kg급 멀티콥터용으로 개발된 프로펠러에 대해 정적 구조 시험 및 성능 시험을 통해 설계 요구도 충족 여부를 판별하기 위한 시험 평가를 수행하였다. 정적 구조 시험에서는 극한 하중 및 요구도 하중 부가 후 시편 파손이 발생하지 않음으로써 프로펠러 구조 강도에 대한 안전 여유 3 이상을 갖는 것으로 나타났다. 성능 시험에서는 설계 요구도의 제자리 비행 추력 및 최대 추력을 발생시키고, 운용 추력 영역에서 제자리 비행 성능 효율은 0.73 이상을 나타내었다. 기준 프로펠러와 비교할 때, 성능 효율 최대값은 3% 이상 증가되고, 소비 전력은 운용 영역에서 4% 이상 저감되는 것으로 나타났다. 구조 강도 요구도 및 성능 요구도를 충족시킴으로써 프로펠러는 성공적으로 개발된 것으로 평가되었다.